Capacitor metalized polypropylene film type DGCX MX2224KQ3C30YB2000R with UL CUL ENEC VDE and CQC certifications
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
The DGCX X2 series is a range of metalized polypropylene film capacitors designed for suppressing electromagnetic interference (EMI) in power supplies. These capacitors feature a non-inductive winding structure with excellent self-healing properties, capable of withstanding high voltage surges. Encased in a flame-retardant plastic shell (UL94V-0) and sealed with flame-retardant epoxy resin, they are ideal for interference suppression and X-line applications where capacitor failure must not pose a shock hazard. They are compliant with RoHS, REACH, and halogen-free requirements.
Product Attributes
- Brand: DGCX
- Product Series: MPX
- Capacitor Type: X2 Metalized Polypropylene Film Capacitor
- Construction: Non-inductive winding
- Encapsulation: Flame-retardant plastic shell (PBT), Flame-retardant epoxy resin
- Material Compliance: RoHS, REACH, Halogen-free (if required)
- Certifications: UL&CUL (E499953), ENEC-VDE (40048056), CQC (CQC18001191338)
- Color: Yellow (Y)
- Origin: Dongguan Chengxi Electronics Co., Ltd.
Technical Specifications
| Product Code | Capacitance (uF) | Tolerance (%) | Rated Voltage (VAC) | Pitch (mm) | Dimensions (mm) W*H*T | Lead Diameter (mm) | Climate Category/Flammability Rating | Dissipation Factor (DF) @ 1kHz | Insulation Resistance | Dielectric Strength (AC) |
|---|---|---|---|---|---|---|---|---|---|---|
| MX2224KQ3C30YB2000R | 0.22 | 10% | 275/300/310 | 10.0 | 13.0*12.0*6.0 | 0.6 | 40/110/56 B | 0.0010 | 15,000M (for C0.33uF) / 5000M*uF (for C>0.33uF) | 2120Vac (60s) (between case and terminals) |
| General Specifications (MPX Series) | 0.001F4.7F | 10% (K) | 275/300/310 Vac | 5.0, 7.5, 10.0, 12.5, 15.0, 22.5, 27.5, 31.0, 37.5, 41.0, 52.5 | N/A | 0.6, 0.8, 1.0, 1.2 | 40/110/56 B | See detailed table below | See detailed table below | 4.3UR(VDC), 5s (between terminals) |
Detailed Electrical Characteristics
| Item | Characteristic | Test Method | Specification |
|---|---|---|---|
| 1. Terminal Strength | Tensile Strength | Lead Diameter: 0.6&0.8mm: 10N, 10s Lead Diameter: 1.0&1.2mm: 20N, 10s | No visible mechanical damage |
| Bending Strength | Lead Diameter: 0.6&0.8mm: 5N, 90x2 times Lead Diameter: 1.0&1.2mm: 10N, 90x2 times | No visible mechanical damage | |
| 2. Solderability | Solder wetting rate | Solder temp: 2455, Immersion time: 2.50.5s | 95% |
| 3. Soldering Heat Resistance | Appearance | Solder temp: 2605, Immersion time: 101s, Recovery time: 1-2h at -40 for 2h | No visible damage |
| Dissipation Factor increase | - | 0.005 | |
| Capacitance change | - | C/C 5% | |
| 4. Endurance (Humidity, Heat, Vibration, Shock) | Appearance | - | No visible damage |
| Capacitance change | - | C/C 5% | |
| Dissipation Factor increase | C1.0F (10kHz): 0.008 C>1.0F (1kHz): 0.005 | - | |
| 5. Climate Sequence (Test Db) | Appearance | - | No visible damage |
| Capacitance change | - | C/C 5% | |
| Dissipation Factor increase | C1.0F (10kHz): 0.008 C>1.0F (1kHz): 0.005 | - | |
| 6. Damp Heat (Steady State) | Appearance | Relative Humidity: 9095%RH, Temp: 402, Duration: 56 days | No visible damage |
| Capacitance change | - | C/C 5% | |
| Dissipation Factor increase | C1.0F (10kHz): 0.008 C>1.0F (1kHz): 0.005 | - | |
| 7. Pulse Voltage | Self-healing breakdown | Applied pulse voltage: 1.0KV (CR1F), 2.0KV (CR>1F) | Capacitor is considered qualified if less than three continuous pulse waveforms indicate no self-healing breakdown after 24 pulses. |
| 8. Endurance | Appearance | Temp: +110, Test Voltage: 1.25UR, Duration: 1000 hours | No visible damage |
| Capacitance change | - | C/C 10% | |
| Dissipation Factor increase | C1.0F (10kHz): 0.008 C>1.0F (1kHz): 0.005 | - | |
| 9. Charge/Discharge | Appearance | Charge/Discharge cycles: 10,000; Charging time: 0.5s; Discharging time: 0.5s | No visible damage |
| Capacitance change | - | C/C 10% | |
| Dissipation Factor increase | 10KHz, CR1.0uF: 0.008 1KHz, CR>1.0uF: 0.005 | - | |
| 10. Flammability Test | Burning time after flame removal | Needle flame test, Burning time application based on volume (mm) | 10 seconds. Burning drips should not ignite tissue paper. Flammability rating: B. |
| 11. Spontaneous Combustion Test | Burning of gauze | Capacitor subjected to discharge from a stored energy capacitor 20 times. | Gauze should not burn. Electrical measurement not required. |
Usage Guidelines
- Operating Range: Do not exceed the upper limit category temperature. Avoid overload and exceeding maximum pulse current.
- Handling: Avoid repeated squeezing at the lead root. Be mindful of lead tip sharpness.
- Soldering:
- Wave Soldering: TP 110; Ts 120, 45s. For P7.5mm, T4mm, soldering time
- Soldering Iron: Tip temperature not exceeding 350, soldering time not exceeding 3 seconds.
- Reflow Soldering: Not suitable for film capacitors with printed lines.
Storage Conditions
- Store in original packaging.
- Temperature: Max 35
- Relative Humidity: Max 80%
- Storage Time: Maximum 12 months from the production date marked on the packaging bag.
- Note: Prolonged exposure to air may degrade lead solderability. Avoid high temperature and humidity environments.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina