Halogen Free Metallized Polypropylene Film Capacitor DGCX MPP684J2SC05HB200ZR-H16 Epoxy Encapsulated
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
The CBB21/MPP series capacitors are metallized polypropylene film capacitors with an epoxy encapsulated, non-inductive winding structure. They feature a self-healing capability, low loss, and low internal temperature rise. These capacitors are suitable for DC blocking, coupling, decoupling, filtering, bypassing, and other high-frequency, DC, AC, and pulse circuits. They are widely used in electronic equipment.
Product Attributes
- Brand: DGCX (Company trademark)
- Product Series: CBB21/MPP
- Construction: Non-inductive winding, epoxy encapsulated
- Material: Metallized polypropylene film
- Leads: Tinned copper wire or tinned copper-clad steel wire
- Encapsulation: Flame-retardant epoxy resin powder coating (UL94V-0)
- Environmental Compliance: RoHS, REACH, Halogen-free (if required)
- Origin: Dongguan City, Guangdong Province, China
Technical Specifications
| Parameter | Specification | Test Method/Condition |
|---|---|---|
| Product Type | CBB21/MPP Metallized Polypropylene Film Capacitor (Impregnated Type) | |
| Model/Part Number | MPP684J2SC05HB200ZR-H16 | |
| Nominal Capacitance | 0.68 F 5% | |
| Rated Voltage | 450 V.dc | |
| Dimensions (L*W*H) | 12*16.5*5.5 mm (approximate) | |
| Climate Category | 40/105/21 | |
| Operating Temperature Range | -40 to +105 | (Derating factor 1.25% / for +85 to +105) |
| Rated Temperature | 85 | |
| Capacitance Range | 0.001F to 6.8F | |
| Capacitance Tolerance | 5% (K), 10% (M) | |
| Rated Voltage Options | 100Vdc, 160Vdc, 250Vdc, 400Vdc, 450Vdc, 520Vdc, 630Vdc, 800Vdc, 1000Vdc, 1200Vdc, 1250Vdc, 1600Vdc, 2000Vdc, 2500Vdc, 3000Vdc | |
| Dissipation Factor (DF) | 0.0010 (1kHz, 20) | |
| Insulation Resistance | 30,000 M for C 0.33F (100VDC, 60s) | |
| Insulation Resistance (cont.) | 10,000 M*F for C > 0.33F (100VDC, 60s) | |
| Dielectric Strength | 1.6 UR(VDC), 5 seconds | |
| Max. Pulse Rise Rate (dV/dt) | Refer to chart in document (dependent on UR and lead pitch) | |
| Terminal Strength (Tensile) | No visible mechanical damage | Wire diameter: 0.6 & 0.8mm; Load: 10N, Time: 10 seconds |
| Terminal Strength (Bending) | No visible damage | Wire diameter: 0.6 & 0.8mm; Force: 5N, 90 2 times |
| Solderability | 95% tinning rate on leads | Flux temp: 2455, Immersion time: 2.50.5s |
| Soldering Heat Resistance | No visible damage | Solder temp: 2605, Immersion time: 101s, Recovery time: 1-2 hours |
| Capacitance Change (Soldering Heat) | C/C 3% | |
| DF Increase (Soldering Heat) | 0.004 (C1.0F, 10kHz); 0.004 (C>1.0F, 1kHz) | |
| Vibration Resistance | No visible damage | Amplitude 0.75mm or acceleration 98m/s, Frequency 10-500Hz, 2h per direction (3 directions) |
| Impact Resistance | No visible damage | 4000 times, acceleration 390m/s, pulse duration 6ms |
| Capacitance Change (after tests) | C/C 5% | |
| DF Increase (after tests) | 0.004 | |
| Insulation Resistance Change (after tests) | IR/IR 50% | |
| Steady State Damp Heat | No visible damage | RH 90-95%, Temp: 402, 21 days |
| Capacitance Change (Damp Heat) | C/C 5% | |
| DF Increase (Damp Heat) | 0.002 (C1.0F, 10kHz); 0.004 (C>1.0F, 1kHz) | |
| Insulation Resistance Change (Damp Heat) | IR/IR 50% | |
| Endurance Test | No visible damage | 85, 1000 hours, Voltage: 1.25UR |
| Capacitance Change (Endurance) | C/C 8% | |
| DF Increase (Endurance) | 0.004 | |
| Insulation Resistance Change (Endurance) | IR/IR 50% | |
| Charge/Discharge Cycles | No visible damage | 10,000 cycles; Charge time: 0.5s, Discharge time: 0.5s, Charge voltage: UR |
| Capacitance Change (Charge/Discharge) | C/C 5% | |
| DF Increase (Charge/Discharge) | 0.005 (10KHz, CR1.0uF); 0.005 (1KHz, CR>1.0uF) | |
| Insulation Resistance Change (Charge/Discharge) | IR/IR 50% | |
| Storage Conditions | Temperature: Max 35, Relative Humidity: Max 80% | Max storage time: 12 months from production date |
| Soldering Temperature (Wave) | TP 110 for 120s; Ts 120 for 45s | For P7.5mm, T4mm, wave soldering time |
| Soldering Temperature (Iron) | Tip temp 350, time 3 seconds |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina