Non Inductive Winding Metallized Polypropylene Film Capacitor DGCX MPP104J2JB060B20NZR Epoxy Coated Component
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
The CBB21/MPP series metallized polypropylene film capacitor (impregnated type) is an epoxy encapsulated component designed for electronic equipment. It features a non-inductive winding structure with metallized polypropylene film and tin-plated copper wire or tin-plated copper-clad steel leads. These capacitors are suitable for DC blocking, coupling, decoupling, filtering, bypassing, and other high-frequency, DC, AC, and pulse circuits. Key advantages include excellent self-healing properties, low loss, and low internal temperature rise, all encapsulated in a flame-retardant epoxy resin powder coating.
Product Attributes
- Product Type: Metallized Polypropylene Film Capacitor (Impregnated Type)
- Series: CBB21/MPP
- Brand: Chengxi Electronics ()
- Encapsulation: Flame-retardant Epoxy Resin Powder Coating
- Construction: Non-inductive winding
- Leads: Tin-plated copper wire or Tin-plated copper-clad steel wire
- Environmental Compliance: RoHS, REACH, Halogen-free (if required)
- Certifications: UL94V-0 (for encapsulation material)
Technical Specifications
| Parameter | Specification | Test Method/Condition |
|---|---|---|
| Product Code | MPP104J2JB060B20NZR | N/A |
| Customer Part Number | N/A | N/A |
| Approval Certificate Number | CX-MPP-251118-01 | N/A |
| Issue Date | 2025-11-18 | N/A |
| Model | CBB21/MPP | N/A |
| Capacitance | 0.1uF 5% | N/A |
| Rated Voltage | 630V.dc | N/A |
| Pitch (P) | 7.5mm | N/A |
| Dimensions (W*H*T) | 9.5*9.1*5.8 mm | N/A |
| Low Noise | Yes | N/A |
| Climate Category | 40/105/21 | GB 10190, IEC60384-16 |
| Operating Temperature Range | -40~+105 | (Voltage derating 1.25% / for +85~+105) |
| Rated Temperature | 85 | N/A |
| Capacitance Range | 0.001F6.8F | N/A |
| Capacitance Tolerance | 5%(J), 10%(K) | N/A |
| Rated Voltage (DC) | 100Vdc, 160Vdc, 250Vdc, 400Vdc, 630Vdc, 1000Vdc, 1250Vdc, 1600 Vdc, 2000 Vdc | N/A |
| Dissipation Factor (DF) (1kHz, 20) | 0.0010 | N/A |
| Insulation Resistance | 30,000M for C0.33uF (100VDC, 60s) | N/A |
| Insulation Resistance | 10000M*uF for C>0.33uF (100VDC, 60s) | N/A |
| Dielectric Strength | 1.6UR(VDC), 5 seconds | N/A |
| Maximum Pulse Rise Rate (dV/dt) | See chart in source document (dependent on UR and Pitch) | N/A |
| Lead Strength (Tensile) | No visible mechanical damage | 10N, 10 seconds (for 0.6 & 0.8mm wire diameter) |
| Lead Strength (Bending) | No visible mechanical damage | 5N, 90x2 times (for 0.6 & 0.8mm wire diameter) |
| Solderability | 95% tinning rate on leads | 2455, 2.50.5 seconds |
| Soldering Heat Resistance | Appearance: No visible damage; DF increase 0.004; Capacitance change C/C3% | 2605, 101 seconds, 1-2 hours recovery |
| Rapid Temperature Change | Appearance: No visible damage; Capacitance change C/C5%; DF increase 0.004; Insulation Resistance IR/IR50% | 5 cycles of -40 (30min) to +105 (30min) |
| Vibration | Appearance: No visible damage; Capacitance change C/C5%; DF increase 0.004; Insulation Resistance IR/IR50% | Amplitude 0.75mm or 98m/s, 10-500Hz, 2h per direction (total 6h) |
| Impact | Appearance: No visible damage; Capacitance change C/C5%; DF increase 0.004; Insulation Resistance IR/IR50% | 4000 times, 390m/s, 6ms pulse duration |
| Climatic Sequence | Appearance: No visible damage; Capacitance change C/C5%; DF increase 0.005; Insulation Resistance IR/IR50% | Test Db cycles, Dry Heat (+105, 16h), Cold (-40, 2h), Low Pressure (8.5kPa, 1h) |
| Damp Heat (Steady State) | Appearance: No visible damage; Capacitance change C/C5%; DF increase 0.002 (C1.0F, 10kHz) or 0.004 (C>1.0F, 1kHz); Insulation Resistance IR/IR50% | 90-95%RH, 402, 21 days, 1-2 hours recovery |
| Endurance | Appearance: No visible damage; Capacitance change C/C8%; DF increase 0.004; Insulation Resistance IR/IR50% | 1000 hours at 85 with 1.25UR applied voltage |
| Characteristics with Temperature | See source document for specific capacitance change percentages at -40 and +105 relative to 20. | Static method, holding at specified temperatures (a, b, d, f, g) |
| Charge/Discharge | Capacitance change C/C5%; DF increase 0.005; Insulation Resistance IR/IR50% | 10,000 cycles (0.5s charge, 0.5s discharge) at UR, specific resistance values |
| Main Material: Metallized Polypropylene Film | MPPZAH | N/A |
| Main Material: Spraying Layer | Zinc-tin alloy wire | N/A |
| Main Material: Leads | Tin-plated copper-clad steel wire | N/A |
| Main Material: Outer Encapsulation | Epoxy resin powder | Flame retardant UL94V-0 |
| Main Material: Inner Protective Material | Epoxy resin | N/A |
| Packaging (Inner Box) | 34.5*23.5*24.5 cm (L*W*H) | N/A |
| Packaging (Outer Box) | 49*36*27 cm (L*W*H) | N/A |
| Storage Conditions | Temperature: Max 35, Relative Humidity: Max 80% | Original packaging, max 12 months from production date |
| Soldering Rules (Wave Soldering) | TP 110, 120s; Ts 120, 45s; For P7.5mm, T4mm: | N/A |
| Soldering Rules (Soldering Iron) | Tip temperature 350, time 3 seconds | N/A |
| Soldering Rules (Reflow Soldering) | Not suitable for leaded film capacitors | N/A |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina