Metallized Polypropylene Film Capacitor DGCX MPP222J2JB040C3F0ZR with Flame Retardant Epoxy Coating
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
The CBB21/MPP series metallized polypropylene film capacitors are designed for electronic equipment with epoxy encapsulation. These capacitors feature a non-inductive winding structure with metallized polypropylene film and tin-plated copper wire or tin-plated copper-clad steel wire leads. They are widely used for DC blocking, coupling, decoupling, filtering, bypassing, and other high-frequency, DC, AC, and pulse circuits. Key advantages include excellent self-healing properties due to the non-inductive structure, low loss, and minimal internal temperature rise, all encapsulated in flame-retardant epoxy resin powder coating.
Product Attributes
- Brand: DGCX
- Product Type: CBB21/MPP Metalized Polypropylene Film Capacitor (Impregnated Type)
- Origin: Dongguan City Chengxi Electronics Co., Ltd.
- Encapsulation: Flame-retardant epoxy resin powder coating (UL94V-0)
- Internal Coating: Epoxy Resin
- Environmental Compliance: RoHS, REACH, Halogen-free (if required)
- Lead Material: Tin-plated copper-clad steel wire
- Internal Metallization: Zinc-tin alloy wire
Technical Specifications
| Part Number | Capacitance (uF) | Tolerance (%) | Rated Voltage (VDC) | Dissipation Factor (DF) (1KHz) | Dimensions (mm) (L x W x T) | Pitch (P) | Lead Diameter (d) |
|---|---|---|---|---|---|---|---|
| MPP222J2JB040C3F0ZR | 0.0022 | 5% | 630 | 0.1% | 9 x 6.5 x 3.5 | 7.5 | 0.6 |
| Specification | Technical Specification | Standard |
|---|---|---|
| Climate Category | 40/105/21 | |
| Operating Temperature Range | -40 to +105 (+85 to +105: Rated voltage derating 1.25% / ) | |
| Rated Temperature | 85 | |
| Capacitance Range | 0.001F to 6.8F | |
| Capacitance Tolerance | 5% (J), 10% (K) | |
| Rated Voltage (VDC) | 100, 160, 250, 400, 630, 1000, 1250, 1600, 2000 | |
| Dissipation Factor (DF) | 0.0010 (1kHz, 20) | |
| Insulation Resistance | 30,000 M for C 0.33uF (100VDC, 60 sec) 10000 M*uF for C > 0.33uF (100VDC, 60 sec) | |
| Withstand Voltage | 1.6 UR(VDC), 5 seconds | |
| Max. Pulse Rise Speed (dV/dt) | See table in source document for specific UR and P values. | |
| Marking | DGCX company trademark, MPP product model or code, capacitance and tolerance, rated voltage. Example: DGCX MPP 224J 400V |
Packaging Specifications
| Item | Dimensions (L x W x H) |
|---|---|
| Inner Carton | 34.5 x 23.5 x 24.5 cm |
| Outer Carton | 49 x 36 x 27 cm |
Storage Conditions
- Temperature: Max 35
- Relative Humidity: Max 80%
- Storage Time: Max 12 months from production date.
Environmental Characteristics
- Compliant with RoHS requirements.
- Compliant with REACH requirements.
- Compliant with Halogen-free requirements (if specified).
Product Electrical Characteristics and Test Conditions
Unless otherwise specified, tests are conducted under standard atmospheric conditions (Temperature: 1535, Relative Humidity: 25%75%). For disputed results, tests are performed under stricter conditions (Temperature: 202, Relative Humidity: 60%70%).
| No. | Item | Test Method | Initial Measurement | After Test |
|---|---|---|---|---|
| 1 | Terminal Strength | Tensile Strength (10N, 10s), Bending Strength (5N, 90x2) | No visible mechanical damage | No visible mechanical damage |
| 2 | Solderability | Immersion time: 2.50.5s, Flux temp: 2455 | Solder coverage rate 95% on leads | |
| 3 | Soldering Heat Resistance | Immersion time: 101s, Flux temp: 2605 | Appearance: No visible damage, Capacitance change: C/C3%, DF increase: 0.004 | |
| 4 | Rapid Temperature Change | 5 cycles (-40 to +105, 30min each) | Capacitance (1KHz), DF | Appearance: No visible damage, Capacitance change: C/C5%, DF increase: 0.004, Insulation Resistance: IR/IR50% |
| 5 | Climatic Sequence | Dry Heat (+105, 16h), Cyclic Damp Heat (DB), Cold (-40, 2h), Low Pressure (8.5kPa, 1h) | Capacitance (1KHz), DF, Insulation Resistance | Appearance: No visible damage, Capacitance change: C/C5%, DF increase: 0.005, Insulation Resistance: IR/IR50% |
| 6 | Damp Heat (Steady State) | 9095%RH, 402, 21 days | Capacitance (1KHz), DF, Insulation Resistance | Appearance: No visible damage, Capacitance change: C/C5%, DF increase: 0.002 (C1.0F, 10kHz) / 0.004 (C>1.0F, 1kHz), Insulation Resistance: IR/IR50% |
| 7 | Endurance | 85, 1000 hours, 1.25UR applied voltage | Capacitance (1KHz), DF, Insulation Resistance | Appearance: No visible damage, Capacitance change: C/C8%, DF increase: 0.004, Insulation Resistance: IR/IR50% |
| 8 | Characteristics Dependent on Temperature | Static method at -40, 20, 105 | Capacitance measurement | 0(Cb-Cd)/Cd+3% at -40, -4.0%(Cf-Cd)/Cd0 at 105 |
| 9 | Charge/Discharge | 10,000 cycles (0.5s charge, 0.5s discharge) | Capacitance (1KHz), DF, Insulation Resistance | Capacitance change: C/C5%, DF increase: 0.005, Insulation Resistance: IR/IR50% |
Usage Rules
- Usage Range: Do not exceed the upper category temperature. Avoid overload. Do not exceed maximum pulse current.
- Operation Precautions: Avoid repeated squeezing at the lead root. Pay attention to lead tip.
- Soldering:
- Wave Soldering: TP 110 for 120s; Ts 120 for 45s. For P7.5mm, T4mm, soldering time
- Soldering Iron: Tip temperature not exceeding 350, time not exceeding 3 seconds.
- Not suitable for reflow soldering.
- Ts: Maximum temperature the component body can withstand during wave soldering.
- Tp: Maximum preheating temperature the component body can withstand.
Maximum Effective Voltage vs. Frequency Curve
Note: Curve values are typical under sinusoidal voltage, ambient temperature 85, and internal temperature rise T=10.
Product Electrical Characteristic Diagrams
(Diagrams not provided in text)
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina