Metallized polypropylene film capacitor DGCX PPS223J3FA100B200ZR for energy saving lamp applications
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
The CBB81/PPS series high-voltage metallized polypropylene film/foil capacitor (impregnated type) is designed for high-voltage and high-frequency pulse circuits. It features a metallized polypropylene film and aluminum foil composite with an internal series non-inductive structure. The capacitor is encapsulated with flame-retardant epoxy resin powder. Typical applications include deflection circuits in televisions and monitors (S-correction and horizontal retrace waveforms), electronic ballasts, energy-saving lamps, absorption circuits, and SCR rectifier circuits. Key advantages include low loss, low internal temperature rise, and high dv/dt and overcurrent capabilities.
Product Attributes
- Brand: CX ()
- Product Series: CBB81/PPS
- Type: High-voltage metallized polypropylene film/foil capacitor (impregnated type)
- Construction: Metallized film & metal foil composite, internal series non-inductive structure
- Encapsulation: Flame-retardant epoxy resin powder
- Lead Material: Tinned copper-clad steel wire
- Sprayed Layer: Zinc-tin alloy wire
- Environmental Compliance: RoHS, REACH, Halogen-free (if required)
- Origin: Dongguan, Guangdong Province, China
Technical Specifications
| Model/Part Number | Capacitance (uF) | Tolerance (%) | Rated Voltage (V.dc) | Dissipation Factor (DF) (1KHz) (%) | Dimensions (mm) L x W x T (max) | Pitch (P) (mm) | Lead Diameter (d) (mm) |
|---|---|---|---|---|---|---|---|
| CBB81/PPS 0.022uF5% 3000V.dc P20 | 0.022 | 5% | 3000 | 0.1 | 22.0 x 16.0 x 10.0 | 20.0 | 0.8 0.05 |
| PPS223J3FA100B200ZR | 0.022 | 5% (J) | 3000 (3F) | 0.1 | 22.0 x 16.0 x 10.0 | 20.0 | 0.8 0.05 |
| Specification | Technical Data |
|---|---|
| Climate Category | 40/105/21 |
| Operating Temperature Range | -40 to +105 (+85 to +105: Derating 1.5% per for R.V(dc)) |
| Capacitance Range | 0.00022F to 0.047F |
| Capacitance Tolerance | 3%(H); 5%(J); 10%(K) |
| Rated Voltage (V.dc) | 630V, 1000V, 1200/1250V, 1600V, 2000V |
| Dissipation Factor (DF) | 0.1% (1KHz), 0.2% (10KHz), at 20~25 |
| Insulation Resistance | 50000M for C0.33F; 15000MuF for C>0.33F (Measured at 100VDC10VDC/60s / 20~25) |
| Dielectric Strength (Terminal to Terminal) | 1.75 UR(VDC), 5 seconds |
| Maximum Pulse Rise Slope (dV/dt) | See table in source document for specific values based on UR and Pitch. |
| Lead Strength (Tensile) | 10N, 10 seconds (for 0.6 & 0.8mm wire diameter) |
| Lead Strength (Bending) | 5N, 90 2 times (for 0.6 & 0.8mm wire diameter) |
| Solderability | 95% tinning rate on leads (Soldering flux temp: 2455, Immersion time: 2.50.5s) |
| Soldering Heat Resistance | Appearance: No visible damage; Capacitance change: C/C3%; DF increase: 0.002 (10kHz) (Soldering temp: 2605, Immersion time: 101s) |
| Rapid Change of Temperature Test | Appearance: No visible damage; Capacitance change: C/C3%; DF increase: 0.002 |
| Vibration Test | Appearance: No visible damage (Amplitude 0.75mm or Acceleration 98m/s, Frequency 10-500Hz, 3 directions, 2h each) |
| Impact Test | Appearance: No visible damage (4000 times, Acceleration 390m/s, Pulse duration: 6ms) |
| Climate Sequence Test | Appearance: No visible damage; Capacitance change: C/C3%; DF increase: 0.002; Insulation Resistance change: IR/IR50% |
| Damp Heat (Steady State) Test | Appearance: No visible damage; Capacitance change: C/C3%; DF increase: 0.002; Insulation Resistance change: IR/IR50% (90-95%RH, 402, 21 days) |
| Endurance Test | Appearance: No visible damage; Capacitance change: C/C8%; DF increase: 0.0015; Insulation Resistance change: IR/IR50% (85, 1000 hours, 1.25UR applied) |
| Charge/Discharge Test | Appearance: No visible damage; Capacitance change: C/C3%; DF increase: 0.003; Insulation Resistance change: IR/IR50% (10,000 cycles) |
| Storage Conditions | Temperature: Max 35, Relative Humidity: Max 80% (Original packaging), Max storage time: 12 months from production date. |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina