Product Overview

The CBB22/MPP series metallized polypropylene film capacitor is an epoxy-encapsulated, non-inductive wound type designed for electronic equipment. It features a self-healing property, low loss, and low internal temperature rise, with a flame-retardant epoxy resin powder coating. This capacitor is widely used for DC blocking, coupling, decoupling, filtering, bypassing, and other high-frequency, DC, AC, and pulse circuits.

Product Attributes

• Brand: CBB22/MPP
• Type: Metallized Polypropylene Film Capacitor (Impregnated Type)
• Origin: Dongguan Chengxi Electronics Co., Ltd. (Heyuan Factory)
• Construction: Non-inductive wound structure
• Encapsulation: Flame-retardant epoxy resin powder coating
• Leads: Tin-plated copper wire or tin-plated copper-clad steel wire
• Internal Material: Zinc-tin alloy spray layer
• Environmental Compliance: RoHS, REACH, Halogen-free (if required)

Technical Specifications

Product Features

• Metallized polypropylene film non-inductive structure with good self-healing performance.
• Low loss and low internal temperature rise.
• Flame-retardant epoxy resin powder coating.

Electrical Characteristics

• Climate Category: 40/105/21
• Operating Temperature Range: -40 to +105 (with derating above 85)
• Rated Temperature: 85
• Capacitance Range: 0.001F to 6.8F
• Rated Voltage: 100Vdc, 160Vdc, 250Vdc, 400Vdc, 630Vdc, 1000Vdc, 1250Vdc, 1600Vdc, 2000Vdc

Storage Conditions

• Temperature: Max 35
• Relative Humidity: Max 80%
• Storage Time: Max 12 months from the production date

Soldering Information

• Wave Soldering: TP 110 for 120s; Ts 120 for 45s. For P7.5mm, T4mm, soldering time
• Iron Soldering: Tip temperature not exceeding 350, time not exceeding 3 seconds.
• Note: Not suitable for reflow soldering.