Metallized Polypropylene Film Capacitor DGCX MPP224J2GD050B200ZR for Coupling Decoupling and Filtering
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
The CBB21/MPP series metallized polypropylene film capacitors are designed for electronic equipment with epoxy encapsulation. Featuring a non-inductive winding structure and a self-healing capability, these capacitors offer low loss and minimal internal temperature rise. They are widely used for DC blocking, coupling, decoupling, filtering, bypassing, and other high-frequency, DC, AC, and pulse circuits. The capacitors are constructed with metallized polypropylene film, zinc-tin alloy spray, tinned copper-clad steel leads, and are encapsulated with flame-retardant epoxy resin powder, meeting RoHS environmental requirements.
Product Attributes
- Brand: Dongguan Chengxi Electronics Co., Ltd.
- Product Type: CBB21/MPP Type Metallized Polypropylene Film Capacitor (Impregnated Type)
- Origin: Heyuan Factory, Guangdong Province
- Encapsulation: Flame-retardant Epoxy Resin Powder
- Lead Material: Tinned Copper-Clad Steel Wire
- Environmental Compliance: RoHS, REACH, Halogen-free (if required)
Technical Specifications
| Model/Part Number | Capacitance (uF) | Tolerance (%) | Rated Voltage (V.dc) | Dissipation Factor (DF) (1KHz) | Dimensions (mm) (W x H x T) | Lead Pitch (P) | Lead Diameter (d) | Minimum Length (L) |
|---|---|---|---|---|---|---|---|---|
| MPP224J2GD050B200ZR | 0.22 | 5% | 400 | 0.1% | 17 x 10 x 5.2 | 15.0 | 0.8 | 20.0 |
Electrical Characteristics
| Parameter | Specification | Test Conditions |
|---|---|---|
| Climate Category | 40/105/21 | |
| Operating Temperature Range | -40 to +105 | (+85 to +105: Rated voltage derating 1.25%/) |
| Rated Temperature | 85 | |
| Capacitance Range | 0.001F to 6.8F | |
| Capacitance Tolerance | 5% (J), 10% (K) | |
| Rated Voltage (Vdc) | 100, 160, 250, 400, 630, 1000, 1250, 1600, 2000 | |
| Dissipation Factor (DF) | 0.0010 | (1kHz, 20) |
| Insulation Resistance | 30,000 M for C 0.33uF | (100VDC, 60 seconds) |
| Insulation Resistance | 10,000 M*uF for C > 0.33uF | (100VDC, 60 seconds) |
| Dielectric Strength | 1.6 UR(VDC) | 5 seconds |
Product Structure and Main Materials
| No. | Main Material | Description | Remarks |
|---|---|---|---|
| 1 | Metallized Polypropylene Film | MPPZAH | -/- |
| 2 | Spray Plating Layer | Zinc-tin alloy wire | -/- |
| 3 | Lead Wire | Tinned copper-clad steel wire | -/- |
| 4 | Outer Encapsulation Material | Epoxy resin powder | Flame retardant UL94V-0 |
| 5 | Inner Protective Material | Epoxy resin |
Packaging Information
| Item | Dimensions (L*W*H) |
|---|---|
| Inner Carton | 34.5 x 23.5 x 24.5 cm |
| Outer Carton | 49 x 36 x 27 cm |
Storage Conditions
- Temperature: 35 Max
- Relative Humidity: 80% Max
- Storage Time: Maximum 12 months (from date of production marked on packaging bag)
Product Electrical Characteristics and Test Conditions
| No. | Item | Characteristic | Test Method |
|---|---|---|---|
| 1 | Terminal Strength | Tensile Strength | No visible mechanical damage. Wire diameter: 0.6 & 0.8mm. Load: 10N, Time: 10 seconds. |
| Bending Strength | Wire diameter: 0.6 & 0.8mm. Force: 5N, 90 x 2 times. | ||
| 2 | Solderability | Tinning rate on lead wire 95% | Flux temperature: 2455. Immersion time: 2.50.5 seconds. |
| 3 | Soldering Heat Resistance | Appearance | No visible damage. Solder temperature: 2605. Immersion time: 101 seconds. Recovery time: 1-2 hours. |
| Dissipation Factor Increase | 0.004 (C 1.0F, 10kHz); 0.004 (C > 1.0F, 1kHz) | ||
| Capacitance Change | C/C 3% | ||
| 4 | Temperature Rapid Change | Appearance | No visible damage. 5 cycles of A=-40, B=+105. Duration: t=30min. |
| Vibration | No visible damage. Amplitude 0.75mm or acceleration 98m/s (whichever is smaller), frequency 10-500Hz. Three directions, mutually perpendicular, 2h per direction, total 6h. | ||
| Shock | No visible damage. 4000 times, acceleration 390m/s, pulse duration: 6ms. | ||
| Final Measurement | Appearance: No visible damage. Capacitance Change: C/C 5%. Dissipation Factor Increase: 0.004. Insulation Resistance: IR/IR 50%. | ||
| 5 | Sequential Humidity & Temperature Test | Appearance | No visible damage. Dry heat: +105, 16 hours. Cyclic damp heat (Test Db, first cycle). Cold: -40, 2 hours. Low pressure: 8.5kPa, 1 hour. No permanent breakdown, arcing, or harmful deformation of the casing. Cyclic damp heat (Test Db, remaining cycles). |
| Final Measurement | Appearance: No visible damage. Capacitance Change: C/C 5%. Dissipation Factor Increase: 0.005. Insulation Resistance: IR/IR 50%. | ||
| 6 | Steady State Damp Heat | Appearance | No visible damage. Relative Humidity: 90-95%RH. Temperature: 402. No load, Duration: 21 days. Recovery time: 1-2 hours. |
| Capacitance Change | C/C 5% | ||
| Dissipation Factor Increase | 0.002 (C 1.0F, 10kHz); 0.004 (C > 1.0F, 1kHz) | ||
| Insulation Resistance | IR/IR 50% | ||
| 7 | Endurance | Appearance | No visible damage. T=85, 1000 hours. Applied voltage: 1.25UR. |
| Capacitance Change | C/C 8% | ||
| Dissipation Factor Increase | 0.004 | ||
| Insulation Resistance | IR/IR 50% | ||
| 8 | Charge and Discharge | Capacitance Change | C/C 5% |
| Charge/Discharge cycles: 10,000. Charging time: 0.5s. Discharging time: 0.5s. Charging voltage: Rated voltage UR. Charging resistance: 220/CR (). Discharging resistance: 10/CR or 20 (whichever is larger). CR: Rated capacitance (uF). | |||
| Dissipation Factor Increase | 0.005 (10KHz, CR 1.0uF); 0.005 (1KHz, CR > 1.0uF) | ||
| Insulation Resistance | IR/IR 50% |
Usage Rules
- Operating Range: Do not exceed the upper limit category temperature. Avoid overload. Do not exceed maximum pulse current.
- Handling Precautions: Avoid repeated squeezing at the lead root. Be mindful of the lead tip.
- Soldering: Solder heat can transfer to the capacitor core through the leads and encapsulation layer. Caution must be taken against attenuation or damage due to high temperatures and prolonged soldering.
- Soldering Temperature Range:
- Wave Soldering (MPP Polypropylene Film Capacitors): TP 110 for 120 seconds; Ts 120 for 45 seconds. For P 7.5mm, T 4mm, wave soldering time
- Soldering Iron: Tip temperature not exceeding 350, time not exceeding 3 seconds.
- Lead film capacitors are not suitable for reflow soldering.
- Ts: Maximum temperature the capacitor body endures during wave soldering.
- Tp: Maximum temperature the capacitor body endures during the preheating stage.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina