Capacitor DGCX MPE222J3AM040K200ZR Epoxy Encapsulated Metallized Polyester Film for Electronic Equipment
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
The CL21/MPE series capacitors are epoxy-encapsulated, metallized polyester film capacitors designed for use in electronic equipment. They feature a non-inductive winding structure and are suitable for DC, pulse, and switching circuits, including electronic ballasts and inverters. These capacitors offer small size, good self-healing properties, and are coated with flame-retardant epoxy resin powder.
Product Attributes
- Brand: DGCXCAP
- Origin: Dongguan, China
- Material: Metallized Polyester Film (MPE)
- Certifications: RoHS, REACH, Halogen-free (optional)
Technical Specifications
| Part Number | Capacitance (uF) | Tolerance (%) | Rated Voltage (VDC) | Dissipation Factor (DF) (1KHz, 20) | Dimensions (mm) (W1, H1, T1, P0.5, L Min d0.0) |
|---|---|---|---|---|---|
| MPE222J3AM040K200ZR | 0.0022 | 5 | 1000 | 1.0% | 6.2 x 7.2 x 3.9 x 5.0 x 20.0 x 0.5 |
General Electrical Characteristics
| Parameter | Specification | Test Conditions |
|---|---|---|
| Climate Category | 55/125/21 | |
| Operating Temperature Range | -55 to +125 | (Voltage derating of 1.25%/ from +85 to +125) |
| Rated Temperature | 85 | |
| Capacitance Range | 0.01F10F | |
| Capacitance Tolerance | 5%(J), 10%(K), 20%(M) | |
| Rated Voltage (VDC) | 63, 100, 160, 250, 400, 630, 1000, 1250 | |
| Dissipation Factor (DF) | 0.01 | (1kHz, 20) |
| Insulation Resistance (U100VDC) | 3750M (for C0.33uF) 1250M*uF (for C>0.33uF) | (10VDC, 60 sec) |
| Insulation Resistance (U>100VDC) | 10000M (for C0.33uF) 3000M*uF (for C>0.33uF) | (100VDC, 60 sec) |
| Withstand Voltage | 1.75UR(VDC) | 5 seconds |
Product Structure and Main Materials
| No. | Main Material | Description | Remarks |
|---|---|---|---|
| 1 | Metallized Polyester Film | MPEAM/MPET | -/ - |
| 2 | Sprayed Layer | Zinc-tin alloy wire | -/ - |
| 3 | Leads | Tinned copper-clad steel wire | -/ - |
| 4 | Outer Encapsulation Material | Epoxy resin powder | Flame retardant UL94V-0 |
| 5 | Inner Protective Material | Epoxy resin |
Note: All raw materials and finished products comply with RoHS environmental requirements.
Packaging Information
| Item | Specification |
|---|---|
| Inner Carton Dimensions (L*W*H) | 34.5*23.5*24.5 cm |
| Outer Carton Dimensions (L*W*H) | 49*36*27 cm |
| Carton Contents | Manufacturer Part Number, Bag Count & Quantity per Bag, Lot No. |
| Packaging Method | Transparent PVC bag for moisture and dust protection. |
| Labeling | RoHS environmental mark, other customer-specific markings. |
Storage Conditions
| Condition | Specification |
|---|---|
| Temperature | Max 35 |
| Relative Humidity | Max 80% |
| Storage Time | Max 12 months (from production date marked on packaging) |
Environmental Characteristics
| Characteristic | Compliance |
|---|---|
| RoHS | Compliant |
| REACH | Compliant |
| Halogen-free | Compliant (if required) |
Electrical Characteristics and Test Conditions
| No. | Item | Characteristic | Test Method |
|---|---|---|---|
| 1 | Terminal Strength | Tensile Strength | No visible mechanical damage. Load: 10N, Time: 10 sec. (Wire dia: 0.6&0.8mm) |
| Bending Strength | 5N force, 90 x 2 times. (Wire dia: 0.6&0.8mm) | ||
| 2 | Solderability | Solder coverage rate 95% | Flux temp: 2455, Immersion time: 2.50.5 sec. |
| 3 | Soldering Heat Resistance | Appearance | No visible damage. Solder temp: 2605, Immersion time: 101 sec. Recovery time: 1-2 hours. |
| DF Increase | 0.005 (C1.0F, 10kHz); 0.003 (C>1.0F, 1kHz) | ||
| Capacitance Change | C/C 2% | ||
| 4 | Temperature Rapid Change | Appearance | No visible damage. A=-40, B=+105, 5 cycles. Duration: 30 min. |
| Vibration | No visible damage. Amplitude 0.75mm or acceleration 98m/s, Freq: 10-500Hz. 3 directions, 2h each. | ||
| Shock | No visible damage. 4000 cycles, acceleration 390m/s, pulse duration: 6ms. | ||
| Final Measurement: Capacitance | (1KHz) | ||
| Final Measurement: DF | CR1F: 10kHz; CR>1F: 1kHz. DF Increase 0.003 (C1.0F, 10kHz); 0.002 (C>1.0F, 1kHz) | ||
| Final Measurement: Insulation Resistance | IR/IR 50% | ||
| 5 | Climatic Sequence | Appearance | No visible damage. Dry Heat: +105, 16h. Cyclic Damp Heat (DB) - 1st cycle. Cold: -40, 2h. Low Pressure: 8.5kPa, 1h. Cyclic Damp Heat (DB) - remaining cycles. |
| Final Measurement: Capacitance | C/C 5% | ||
| Final Measurement: DF | CR1F: 10kHz; CR>1F: 1kHz. DF Increase 0.005 (C1.0F, 10kHz); 0.003 (C>1.0F, 1kHz) | ||
| Final Measurement: Insulation Resistance | IR/IR 50% | ||
| 6 | Damp Heat (Steady State) | Appearance | No visible damage. RH: 90-95%RH, Temp: 402, Duration: 21 days. Recovery time: 1-2 hours. |
| Capacitance Change | C/C 5% | ||
| 7 | Endurance | Appearance | No visible damage. Temp: 85, 1000 hours. Applied Voltage: 1.25UR. |
| Capacitance Change | C/C 8% | ||
| DF Increase | CR1F: 10kHz; CR>1F: 1kHz. DF Increase 0.003 (C1.0F, 10kHz); 0.002 (C>1.0F, 1kHz) | ||
| Insulation Resistance | IR/IR 50% | ||
| 8 | Characteristics Dependent on Temperature | Capacitance Measurement at points b, d, f | Static method. Lower category temp (-40): 0 (Cb-Cd)/Cd +3%. Upper category temp (105): -4.0% (Cf-Cd)/Cd 0. |
| 9 | Charge/Discharge | Capacitance Change | C/C 5% |
| DF Increase | CR1.0uF: 10KHz, 0.003. CR>1.0uF: 1KHz, 0.002. | ||
| Insulation Resistance | IR/IR 50% |
Usage Rules
| Category | Details |
|---|---|
| Usage Range | Do not exceed upper category temperature. Avoid overload. Do not exceed maximum pulse current. |
| Operation Precautions | Avoid repeated squeezing at lead root. Pay attention to lead tip. |
| Soldering | Confirm solder temperature within ranges: (1) Wave Soldering (MPE): TP 125 for 120 sec; Ts 160 for 45 sec. (2) Soldering Iron: Tip temp 350, time 3 sec. (3) Lead-type film capacitors are not suitable for reflow soldering. Ts: Max temperature of component body during wave soldering. Tp: Max temperature of component body in preheating zone. |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina