Ferrite core dual inductor surface mount type EATON ACDL2V0910-220-R designed for low ESR and automotive
Product Overview
The ACDL2V series are shielded, dual inductors in a single package, designed for high-frequency operation with low loss and low ESR. Featuring a ferrite core and a compact surface mount package, these inductors are ideal for demanding automotive applications.
Product Attributes
- Brand: Eaton
- Certifications: AEC-Q200, Pb HALOGEN HF FREE
- Construction: Shielded
- Core Material: Ferrite
- Package Type: Surface mount
- Sensitivity Level: MSL 1
Technical Specifications
| Part Number | OCL (H) 20% | Irms (A) | Isat (A) | DCR (m) typical @ +25 C | DCR (m) maximum @ +25 C | SRF (MHz) reference |
| ACDL2V0910-4R7-R | 4.7 | 5.2 | 10 | 15 | 18 | 40 |
| ACDL2V0910-6R8-R | 6.8 | 5.2 | 7.5 | 15 | 18 | 35 |
| ACDL2V0910-8R2-R | 8.2 | 5.2 | 6.4 | 15 | 18 | 31 |
| ACDL2V0910-100-R | 10 | 5.0 | 5.6 | 16.4 | 19 | 25 |
| ACDL2V0910-120-R | 12 | 4.3 | 5.2 | 22 | 25 | 26 |
| ACDL2V0910-150-R | 15 | 3.5 | 4.7 | 32.7 | 39.2 | 22.5 |
| ACDL2V0910-220-R | 22 | 2.5 | 3.5 | 43 | 50 | 18 |
Test Parameters:
1. Open circuit inductance (OCL) test parameters: 100 kHz, 1.0 Vrms, 0.0 Adc, +25 C
2. All test data referenced to +25 C ambient.
3. Irms (per winding): DC current for an approximate temperature rise of 40 C without core loss. Derating is necessary for AC currents. PCB layout, trace thickness and width, air-flow, and proximity of other heat generating components will affect the temperature rise. It is recommended that the temperature of the part not exceed +125 C under worst case operating conditions verified in the end application.
4. Isat (per winding): Peak current for approximately 25% rolloff @ +25 C.
Applications
- Automotive Class D audio amplifiers
- Automotive 12 V/24 V/48 V bidirectional DC/DC converters
- EV battery chargers
- On-board-chargers
- xEV Electrical systems (multiple phases)
Environmental and General Specifications
- Operating temperature range: -40 C to +125 C (ambient plus self-temperature rise)
- Storage temperature range (component): -40 C to +125 C
- Solder reflow temperature: J-STD-020 (latest revision) compliant
Mechanical Parameters
Dimensions (mm):
| Part Number | A | B | C | D | E | F | G |
| ACDL2V0910 | 10.0 0.50 | 9.0 0.50 | 10.0 maximum | 1.9 0.50 | 5.5 0.40 | 6.2 1.0 | 1.2 0.2 |
Schematic: (Refer to original document for schematic image)
Recommended pad layout: (Refer to original document for pad layout image)
Part marking: 2Vxxx WLY R (xxx = inductance value in H, R= decimal point. If no R is present last digit equals number of zeros. WLY R= lot code)
PCB layout recommendation: Recommended solder paste thickness at 0.15 mm and above. Traces or vias underneath the inductor is not recommended.
Packaging Information
Supplied in tape and reel packaging, 300 parts per 13 diameter reel (EIA-481 compliant).
(Refer to original document for detailed packaging dimensions drawing)
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.