Electrolytic Capacitor MB220M050E060T000 Solid Chip MB Series 22uF 50V 6.3x6mm Red Sleeve Component

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This document specifies the MB Series Electrolytic Capacitor from Hubei Milangxingchuang Electronics Co., Ltd. These solid chip capacitors are designed for various electronic applications, offering reliable performance with a focus on durability and specific electrical characteristics. The MB series is manufactured to meet stringent quality standards and environmental regulations.

Product Attributes

Brand: MILANGXINGCHUANG
Origin: Hubei, China
Product Name: Solid Chip Capacitor
Series: MB Series
Certifications: ROHS2.0, REACH, HF compliant
Sleeve Color: Red

Technical Specifications

Item	Specification	Value
Customer P/N	MB	22uF50V 6.3x6
Vendor P/N	MB220M050E060T000
Nominal Capacitance	CAP	22 uF
Rated Voltage	WV (V)	50 V
Size (DxL)	(mm)	6.3 x 6.0
Capacitance Tolerance	Tolerance	-20% ~ +20%
Dissipation Factor (120Hz)	DF (%) max	10
Leakage Current (120Hz, 2min)	LC (uA) max	220.0
Equivalent Series Resistance (100KHz)	ESR (m) max	75
Ripple Current (100KHz)	R.C(mA) max	1550
Surge Voltage	SV (V)	57.5
Load Life	(Hrs)	2000
Operating Temperature	(	-55 ~ 105
Execution Standard		JISC 5101-4
Test Environment		Temperature T 202, Humidity RH 65%5%

Dimensions (mm)

Item	D	L	F	d
Specification	6.3 0.5	6 1.0	2.5 0.5	0.5 0.05

Ripple Current Multipliers

Frequency	Multipliers
120F1K	0.05
1KF10K	0.30
10KF100K	0.70
100KF500K	1.0

Marking

Item	Content
	Rated Voltage
	Capacitance
	Series
	Polarity bar
	Sleeve Color

Material Table

NO.	Component	Material
	Al Foil(+)	high pure aluminum formation foil
	Al Foil(-)	high pure aluminum carbon foil
	leader pin	AlSn
	Separator	Celluose
	Rubber	Organic compounds
	Case	AluminumCoated aluminum can

SMT Processing Dimensions (mm)

Size	W	P	F	A	B	D
5x5.8	16	8.0	7.5	5.6	5.6	6.2
6.3x5.8	16	12	7.5	6.9	6.9	6.2
6.3x7.7	16	12	7.5	7.0	7.0	8.2
8x6.7	24	12	11.5	8.6	8.6	7.2
8x7.7	24	12	11.5	8.7	8.6	8.3
8x9.4	24	16	11.5	8.7	8.6	9.6
8x11.7	24	16	11.5	8.6	8.6	12.3
10x7.7	24	16	11.5	10.7	10.7	8.2
10x12.7	24	16	11.5	10.7	10.7	13.0

Test Items

NO	Item	Conditions	Decision
1	Capacitance	Test Frequency: 120Hz10Hz, Test Voltage: 0.5Vrms +1.0V.DC, Test Temperature: 202	a. Tolerance capacitance, b. Dissipation Factor
2	Dissipation Factor	Test Frequency: 120Hz10Hz, Test Voltage: 0.5Vrms +1.0V.DC, Test Temperature: 202	See the table 2
3	Equivalent Series Resistance	Test Frequency: 100KHz10Hz, Test Voltage: 0.5Vrms +1.0V.DC, Test Temperature: 202	See the table 2
4	Leakage Current	Test Voltage: 50 V, Charging 2min, Test Temperature: 202	LC SPEC: I0.2CVor 300A (whichever is greater)
5	Resistance to Soldering Heat	Warm up time: 1202 seconds, Solder bath temperature: 2605, Solder composition: H60A. H60S or H63A, Immersion depth: 1.5~2.0mm, Immersion duration: 101 seconds	a. No appearance defect. b. Capacitance change within 10%. c. DF smaller than specification value. d. ESR smaller than specification value. e. Leakage current smaller than specification value.
6	Solder Ability	Solder bath temperature: 2452, Solder composition: H60A. H60S or H63A, Immersion depth: 1.5~2.0mm, Immersion duration: 20.5seconds	The solder alloy shall cover the 95% or more of the dipped lead's area.
7	Damp heat	Temperature: 602, Relative humidity: 90% to 95%, Duration: 2408 hours	a. No electrical or mechanical damage. b. Capacitance change within 20%. c. DF smaller than 150% of specification value. d. Leakage current smaller than specification value.
8	Surge Voltage	Test Temp: 15~35 , Apply surge voltage for 30 seconds and discharge for 330 seconds, Repeat this cycle 1000 times.	a. CAP change: within 10% of the initial value. b. DF: Specified value. c. Leakage current: Specified value. d. Appearance: No visible damage.
9	Vibration	Frequency range: 10 Hz to 55 Hz, Amplitude: 0.75 mm, Total duration: 3 2h (X-Y-Z directions each for 2 hours)	a. Appearance: No visible damage or leakage of electrolyte. b. Capacitance change: within 5% of the initial value.
10	Terminal strength	(A) Tensile strength: Specified load for 10 seconds. (B) Bending strength: Apply specified load and bend 90 degrees.	The capacitor shall withstand the constant tensile force and bending without damage either mechanical or electrical. No such Mechanical damage as terminal damage etc.
11	Load Life	Test Temp: 105 2, Rated Voltage: 50 V, Test Time: 2000 (+72 -0) hours (after 16 hours at room temperature)	a. No appearance defect. b. Capacitance change within 20%. c. DF smaller than 200% of specification value. d. Leakage current smaller than specification value.
12	Shelf Life	Test Temp: 105 2, Test Time: 1000 (+72 -0) hours (after 16 hours at room temperature)
13	MAXIMUM APPLICABLE RIPPLE CURRENT	At 100KHz or 120Hz frequency at 105 2. Peak voltage not to exceed rated D.C voltage.
14	Low temperature test	Step 1: 202 (CAP/DF/ESR). Step 2: Minimum operating temperature (722 hours storage).	a. CAP change: within 10% of the initial value. b. DF: Specified value. c. Leakage current: Specified value. d. ESR: Specified value.
15	Rapid change of temperature	Cycles: 5. Step 1: min temp (30min3min). Step 2: 202 (	a. CAP change: within 20% of the initial value. b. DF: Specified value. c. Leakage current: Specified value.
16	Flow soldering test	Preheating: 120 (	a. If twice reflow soldering, immersion time should be 10 sec.or less. b. Capacitance change: Within 10% of the initial value. c. DF, LC, ESR: Less than or equal to the initial specified value.