Industrial EMI suppression component EATON ECMT1V2429S-150-R with 15 mH inductance and 1000 volt isolation

Product Overview

The ECMT1V24 is a through-hole common mode choke designed with a closed magnetic path to minimize conductive EMI emissions. It offers high impedance and inductance values, robust construction, and high voltage isolation across independent winding sections. Rated for 250 Vac, this component is suitable for a wide range of industrial and consumer applications.

Product Attributes

• Brand: Eaton
• Certifications: HALOGEN HF FREE
• Compliance: RoHS compliant

Technical Specifications

Test Parameters

• OCL: 1 kHz, 0.25 Vrms, 0.0 Adc, +25 C
• DCR: 4-wire method measured from the root of base, +25 C
• Irms: Maximum DC current for an approximate temperature rise of 40 C without core loss. Derating is necessary for AC currents. PCB layout, trace thickness and width, air-flow, and proximity of other heat generating components will affect the temperature rise. It is recommended that the temperature of the part not exceed +125 C under worst case operating conditions verified in the end application.
• Hi-pot (Coil-Coil): 2 seconds, 5 mA
• Hi-pot (Coil-Core): 2 seconds, 5 mA
• Insulation Resistance (Coil-Coil and Coil-Core): at 500 Vdc

Part Number Definition

ECMT1Vxxxxy-zzz-R

• ECMT1V = Product code
• xxxx = Size indicator
• y = Orientation (H= horizontal, S= vertical)
• zzz = Inductance value in mH, R= decimal point. If no R is present, the last digit indicates the number of zeros.
• -R = RoHS compliant

Part Marking

xxx-wwyy, xxx = inductance value in mH, wwyy = lot code

Mechanical Parameters

Environmental and General Specifications

• Storage temperature range (Component): -40 C to +85 C
• Operating temperature range: -40 C to +125 C (ambient plus self-temperature rise)
• Wave solder temperature: +260 C maximum

Packaging Information

Supplied in tray, 8 trays per carton. (56 parts per tray x 8 trays per box = 448 parts per carton) (Tray height 25 mm)