PH101M100G130B000 Solid Electrolytic Capacitor 100uF 100V Stable Performance Red Sleeve Aluminum

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

High-performance solid-state electrolytic capacitors from Hubei Milangxingchuang Electronics Co., Ltd., designed for demanding applications. These PH series capacitors offer stable performance, excellent durability, and compliance with international standards.

Product Attributes

Brand: Milangxingchuang
Origin: Hubei, China
Material: High-purity aluminum foil, organic fiber separator, aluminum case
Certifications: ROHS 2.0, REACH, HF compliant
Sleeve Color: Red

Technical Specifications

Item	Specification	Value
Product Name	Solid Electrolytic Capacitor	PH 100uF100V 10x13
Customer P/N	PH101M100G130B000
Vendor P/N
Issue Date	2025/9/5
Dimensions (mm)	D	10 0.5
	L	13 1.0
	F	5.0 0.5
	d	0.6 0.05
Series	PH
Capacitance	100.0 uF
Rated Voltage	100 V
Capacitance Tolerance	-20% ~ +20%
Dissipation Factor (DF) max	10 % (120Hz)
Leakage Current (LC) max	2000.0 uA (60s)
Equivalent Series Resistance (ESR) max	40 m (100KHz)
Ripple Current (R.C) max	3200 mA (100KHz)
Surge Voltage (SV)	115.0 V
Load Life	2000 Hrs
Operating Temperature	-55 ~ +105
Execution Standard	JISC 5101-4
Test Environment	Temperature: 202, Humidity: 65%5%

Ripple Current Multipliers

Frequency	Multipliers
120F1K	0.05
1KF10K	0.30
10KF100K	0.70
100KF500K	1.0

Marking

Item	Description
	Rated Voltage
	Capacitance
	Series
	Polarity bar
	Sleeve Color

Material Table

NO.	Component	Material
	Al Foil(+)	high pure aluminum formation foil
	Al Foil(-)	high pure aluminum carbon foil
	Leader pin	AlSn
	Separator	Cellulose
	Rubber	Organic compounds
	Case	AluminumCoated aluminum can

Test Items Summary

NO.	Item	Conditions	Decision
1	Capacitance	Test Frequency: 120Hz10Hz, Test Voltage: 0.5Vrms +1.0V.DC, Test Temperature: 202	See Table 2
2	Dissipation Factor	Test Voltage: 0.5Vrms +1.0V.DC, Test Temperature: 202	See Table 2
3	Equivalent Series Resistance (ESR)	Test Frequency: 100KHz10Hz, Test Voltage: 0.5Vrms +1.0V.DC, Test Temperature: 202	See Table 2
4	Leakage Current	Test Voltage: 100 V, Charging Time: 2min, Test Temperature: 202	I0.2CVor 300A (Which is greater)
5	Resistance to Soldering Heat	Warm up time: 1202 seconds, Solder bath temperature: 2605, Solder composition: H60A. H60S or H63A, Immersion depth: 1.5~2.0mm, Immersion duration: 101 seconds	a. No appearance defect. b. Capacitance change within 10%. c. DF smaller than specification. d. ESR smaller than specification. e. Leakage current smaller than specification.
6	Solder Ability	Solder bath temperature: 2452, Solder composition: H60A. H60S or H63A, Immersion depth: 1.5~2.0mm, Immersion duration: 20.5seconds	Solder alloy shall cover 95% or more of the dipped lead's area.
7	Damp heat	Temperature: 602, Relative humidity: 90% to 95%, Duration: 2408 hours	a. No electrical or mechanical damage. b. Capacitance change within 20%. c. DF smaller than 150% of specification. d. Leakage current smaller than specification.
8	Surge Voltage	Test Temp: 15~35 , Apply surge voltage for 30 seconds and discharge for 330 seconds, Repeat 1000 times.	a. CAP change: within 10%. b. DF: Specified value. c. Leakage current: Specified value. d. Appearance: No visible damage.
9	Vibration	Frequency range: 10 Hz to 55 Hz, Amplitude: 0.75 mm, Total duration: 3 2h (X-Y-Z directions each for 2 hours)	a. Appearance: No visible damage or leakage. b. Capacitance change: within 5% of initial value.
10	Terminal strength	(A) Tensile strength, (B) Bending strength	Various load conditions based on lead diameter.	a. Capacitor shall withstand specified force without electrical or mechanical damage. b. No mechanical damage like terminal damage.
11	Load Life	Test Temp: 105 2, Rated Voltage: 100 V, Test Time: 2000 (+72 -0) hours (after 16 hours at room temp)	a. No appearance defect. b. Capacitance change within 20%. c. DF smaller than 200% of specification. d. Leakage current smaller than specification.
12	Shelf Life	Test Temp: 105 2, Test Time: 1000 (+72 -0) hours (after 16 hours at room temp)
13	Maximum Applicable Ripple Current	At 100KHz or 120Hz, 105 2. Peak voltage not to exceed rated D.C voltage.
14	Low temperature test	Steps at 202 and minimum operating temperature for 722 hours.	a. CAP change: within 10%. b. DF: Specified value. c. LC: Specified value. d. ESR: Specified value.
15	Rapid change of temperature	Cycles involving minimum and maximum operating temperatures with 30min dwell times.	a. CAP change: within 20%. b. DF: Specified value. c. LC: Specified value.
16	Flow soldering test	Preheating 120	a. If two reflow solders, time should be 10 seconds or less. b. Capacitance change: Within 10% of initial value. c. DF, LC, ESR: Less than or equal to the specified value.