Dielectric ceramic filter ECS ECS-DCF-101 featuring compact SMD monoblock design and RoHS compliance
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
The ECS-DCF-101 is a dielectric ceramic filter designed for various electronic applications. It features a compact, surface-mount (SMD) monoblock construction and conforms to RoHS directive and national environmental protection laws.
Product Attributes
- Brand: ECS Inc. International
- Part Number: ECS-DCF-101
- Construction: SMD dielectric ceramic Monoblock
- Certifications: RoHS directive compliant
- Origin: USA (implied by address)
Technical Specifications
| Item | Requirement | Unit | Notes |
|---|---|---|---|
| ELECTRICAL SPECIFICATIONS | |||
| Center frequency | 5235 | MHz | |
| Bandwidth [BW] | 5150-5330 | MHz | |
| Insertion Loss in BW | 2.5 | dB max | |
| Ripple in BW | 1.3 | dB max | |
| Return loss. in BW | 10 | dB min | |
| Attenuation[Absolute Value] | 50.0 | dB min | @ 5490-5850MHz |
| Input Power | 1 | W max. | |
| In/Out Impedance | 50 | ohm | |
| RATING | |||
| Withstand DC Voltage | 50 | V (1min max) | |
| Insulation Resistance | 100 | M min. | (10V, 1min5s) |
| Storage temperature | -40 to 85 | C | |
| Operation Temperature Range | -40 to +85 | C | |
| ENVIRONMENTAL TESTS (Post-Test Characteristics) | |||
| Humidity Test | Insertion Loss Change: 0.3 dB max, Ripple: 0.3 dB max, Attenuation Change: 2.0 dB min | Referenced to initial measurements | |
| High Temperature Exposure | Insertion Loss Change: 0.3 dB max, Ripple: 0.3 dB max, Attenuation Change: 2.0 dB min | Referenced to initial measurements | |
| Low Temperature | Insertion Loss Change: 0.3 dB max, Ripple: 0.3 dB max, Attenuation Change: 2.0 dB min | Referenced to initial measurements | |
| Temperature Cycle | Insertion Loss Change: 0.3 dB max, Ripple: 0.3 dB max, Attenuation Change: 2.0 dB min | Referenced to initial measurements | |
| Vibration | Insertion Loss Change: 0.3 dB max, Ripple: 0.3 dB max, Attenuation Change: 2.0 dB min | Referenced to initial measurements | |
| Soldering Test | Mechanical damage shall not occur. | Preheating 120C~150C for 60s, Dipping 260C5C for 101s | |
| Solder Ability | Terminals shall be at least 95% covered by solder. | Dipped in 250C5C solder bath for 3s0.5s with rosin flux | |
| Terminal Pressure Strength | Mechanical damage such as breaks shall not occur. | Apply 5N of force for 10s1s in the direction of the arrow after soldering to test PCB | |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina