Chip Common Mode Choke Coil FH CMC1206S-261T Magnetically Shielded Ni Zn Ferrite Core RoHS Compliant
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
The CMC Series Chip Common Mode Choke Coils are designed for effective noise suppression. These magnetically shielded inductors are constructed with a Ni-Zn ferrite core and cover plates, utilizing copper wire and silver/nickel/tin electrodes. Available in 0805 and 1206 series, they offer a range of impedance values suitable for various electronic applications. The products are RoHS compliant and designed for reflow soldering processes.
Product Attributes
- Product Type: Chip Common Mode Choke Coils
- Series: CMC0805S, CMC1206S
- Core Material: Ni-Zn ferrite
- Cover Plate Material: Ni-Zn ferrite
- Electrode Material: Silver (Ag), Nickel (Ni), Tin (Sn)
- Wire Material: Copper (Cu)
- Adhesive Material: Epoxy Resin
- Design: Magnetically Shielded (S)
- Certifications: RoHS compliant
Technical Specifications
| Part Number | Dimensions (L x W x T) (mm) | Nominal Impedance () | Test Frequency (MHz) | Max. DC Resistance () | Max. Rated Voltage (Vdc) | Max. Rated Current (mA) | Min. Insulation Resistance (M) |
|---|---|---|---|---|---|---|---|
| CMC0805S-670T | 2.00.2 x 1.20.2 x 1.20.2 | 67 | 100 | 0.25 | 50 | 400 | 10 |
| CMC0805S-700T | 2.00.2 x 1.20.2 x 1.20.2 | 70 | 100 | 0.30 | 50 | 400 | 10 |
| CMC0805S-750T | 2.00.2 x 1.20.2 x 1.20.2 | 75 | 100 | 0.30 | 50 | 400 | 10 |
| CMC0805S-900T | 2.00.2 x 1.20.2 x 1.20.2 | 90 | 100 | 0.35 | 50 | 330 | 10 |
| CMC0805S-121T | 2.00.2 x 1.20.2 x 1.20.2 | 120 | 100 | 0.30 | 50 | 370 | 10 |
| CMC0805S-161T | 2.00.2 x 1.20.2 x 1.20.2 | 160 | 100 | 0.35 | 50 | 330 | 10 |
| CMC0805S-181T | 2.00.2 x 1.20.2 x 1.20.2 | 180 | 100 | 0.35 | 50 | 330 | 10 |
| CMC0805S-261T | 2.00.2 x 1.20.2 x 1.20.2 | 260 | 100 | 0.40 | 50 | 300 | 10 |
| CMC0805S-301T | 2.00.2 x 1.20.2 x 1.20.2 | 300 | 100 | 0.42 | 50 | 290 | 10 |
| CMC0805S-361T | 2.00.2 x 1.20.2 x 1.20.2 | 360 | 100 | 0.45 | 50 | 280 | 10 |
| CMC0805S-371T | 2.00.2 x 1.20.2 x 1.20.2 | 370 | 100 | 0.45 | 50 | 280 | 10 |
| CMC0805S-451T | 2.00.2 x 1.20.2 x 1.20.2 | 450 | 100 | 0.50 | 50 | 250 | 10 |
| CMC0805S-601T | 2.00.2 x 1.20.2 x 1.20.2 | 600 | 100 | 0.60 | 50 | 220 | 10 |
| CMC0805S-901T | 2.00.2 x 1.20.2 x 1.20.2 | 900 | 100 | 0.90 | 50 | 150 | 10 |
| CMC1206S-900T | 3.20.2 x 1.60.2 x 1.80.2 | 90 | 100 | 0.30 | 50 | 370 | 10 |
| CMC1206S-161T | 3.20.2 x 1.60.2 x 1.80.2 | 160 | 100 | 0.40 | 50 | 340 | 10 |
| CMC1206S-261T | 3.20.2 x 1.60.2 x 1.80.2 | 260 | 100 | 0.50 | 50 | 310 | 10 |
| CMC1206S-371T | 3.20.2 x 1.60.2 x 1.80.2 | 370 | 100 | 0.50 | 50 | 300 | 10 |
| CMC1206S-601T | 3.20.2 x 1.60.2 x 1.80.2 | 600 | 100 | 0.80 | 50 | 260 | 10 |
| CMC1206S-801T | 3.20.2 x 1.60.2 x 1.80.2 | 800 | 100 | 0.90 | 50 | 240 | 10 |
| CMC1206S-102T | 3.20.2 x 1.60.2 x 1.80.2 | 1000 | 100 | 1.00 | 50 | 230 | 10 |
| CMC1206S-142T | 3.20.2 x 1.60.2 x 1.80.2 | 1400 | 100 | 1.00 | 50 | 220 | 10 |
| CMC1206S-202T | 3.20.2 x 1.60.2 x 1.80.2 | 2000 | 100 | 1.20 | 50 | 200 | 10 |
| CMC1206S-222T | 3.20.2 x 1.60.2 x 1.80.2 | 2200 | 100 | 1.20 | 50 | 200 | 10 |
| Reliability Test Item | Requirements | Test Methods and Remarks |
|---|---|---|
| Operating Temperature Range | -40~+85 | |
| Solder ability | Electrode surface solder coverage: 80% | Dip pads in flux and dip in solder pot(96.5Sn/3.0Ag/0.5Cu)at 2455 for 51s. |
| Resistance to Soldering Heat | Impedance shall not change more than 20% | Dip pads in flux and dip in solder pot(96.5Sn/3.0Ag/0.5Cu)at 2605 for 101s. |
| Insulation Resistance | 10 M | The rated voltage is applied between the two windings for a minute. |
| Vibration | Impedance shall not change more than 20% | Amplitude 1.5mm, frequency 10~55Hz, for 2h in each of three (X, Y, Z) axes. |
| Adhesion of electrode | The end electrode did not fall off after the test. | Apply force as shown in diagram. CMC0805 Series: 5 N; CMC1206 Series: 10 N. Keep time: (101)s, Speed: 1.0 mm/s. |
| Low temperature resistance | Impedance shall not change more than 20% | Subjected to -402 for 1000 +24/-0 h. |
| High Temperature Resistance | Impedance shall not change more than 20% | Subjected to 852 for 1000 +24/-0 h. |
| Temperature Characteristic | Impedance shall not change more than 20% | Hold at 202, -402, 202, 852 for 4 hours each. Calculate deviation based on 202. |
| Thermal Shock | Impedance shall not change more than 20% | +85 for 60 min -40 for 60 min, 32 Cycles. Transition time: 2~3 min. |
| High temperature load | Impedance shall not change more than 20% | Apply rated current. Subjected to 852 for 1000 +24/-0 h. |
| Static Humidity | Impedance shall not change more than 20% | Subjected to 90%~95% RH at 602 for 1000 +24/-0 h. |
| Bending strength | No visible mechanical damage. | Install on test substrate; apply force vertically. Bend down 2 mm at a rate of (10.5) mm/s, hold for 5 sec. |
| Solvent Resistance | Impedance shall not change more than 20% | Soak in isopropyl alcohol solution at 235 for 50.5 min. |
| Packaging Type | Part No. | Per Reel | Per Box | Per Case |
|---|---|---|---|---|
| Reel | 0805 | 3000 | 9000 (3 Boxes) | 45000 (5 Cases) |
| Reel | 1206 | 2000 | 6000 (3 Boxes) | 30000 (5 Cases) |
Recommended Soldering Profile: Reflow soldering is recommended. Use rosin-based flux (halide content
Manual Soldering: Iron temperature: 350 (Max), Power: 30W (Max), Soldering Time: < 5S. Avoid touching coils or encapsulation layer.
Cleaning Conditions: Cleaning temperature: 60 (Max), Cleaning time: 5 minutes (Max), Ultrasonic power: 200W (Max).
Storage Requirements:
- Storage Period: Use within 6 months from the inspection date. If exceeding 6 months, check solderability before use.
- Storage Conditions: Temperature: -10 ~ +40, Relative Humidity: 30 ~ 70%. Store away from corrosive substances. Keep on shelves, protected from moisture, dust, heat shock, vibration, and direct sunlight. Store in airtight packaging.
Usage Of ODS (Ozone Depleting Substances): CCl4, HCFC, etc. are not used in the production process.
Notes:
- Products are RoHS compliant.
- Ensure your product is evaluated and confirmed against your specifications when our product is mounted.
- The company does not warrant against failure caused by use deviating from this product specification.
- Do not touch wire with sharp objects such as tweezers to prevent wire breakage.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina