Multilayer Chip Ferrite Inductors FH CMI322513U4R7KT with Pure Silver Electrodes and NiSn Plated Terminals

Product Overview

The CMI322513 Series are multilayer chip ferrite inductors designed for various electronic applications. These inductors are constructed with a ferrite or ceramic body, inner electrodes made of pure silver, and terminal electrodes plated with Ni/Sn. They offer a range of inductance values with tight tolerances and are suitable for reflow soldering processes. The product series is manufactured in China and adheres to RoHS directives if designated as "Unitary lead free.".

Product Attributes

• Product Type: Multilayer Chip Ferrite Inductors
• Series: CMI322513 Series
• Manufacturer Origin: China (implied by document language and structure)
• Body Material: Ferrite (Ni-Cu-Zn system) or Ceramic
• Inner Electrode Material: Pure Silver (Ag)
• Terminal Electrode Material: Silver Layer (Ag) with Ni/Sn plating
• Certifications: RoHS compliant (if designated "Unitary lead free")

Technical Specifications

Reliability Testing Items

Packaging

Recommended Soldering Conditions

Reflow Soldering:

• Pre-heating temperature difference between solder and ferrite surface should not exceed 150.
• Cooling temperature difference into solvent after soldering should not exceed 100.
• Soldering should be performed within the allowable range indicated by the reflow soldering profile curve.

Iron Soldering:

• Soldering Iron Temperature: 350 (Max)
• Power: 30W (Max)
• Soldering Time: < 5S (Avoid applying the soldering iron tip to the terminal electrodes).

Cleaning Conditions

• Cleaning Temperature: 60 (Max)
• Cleaning Time: 1 minute (Min)
• Ultrasonic Output Power: 200W (Max)

Storage Requirements

Storage Period: Within 1 year from the inspection date at the inductor company. If exceeding 1 year, solderability must be checked before use.

Storage Conditions:

• Warehouse Temperature: -10 to +40
• Relative Humidity: 30% to 70%
• Do not store in corrosive substances (sulfur, chlorine gas, acid).
• Store on a shelf to prevent influence from humidity and dust.
• Avoid heat shock, vibration, and direct sunlight.
• Products should be stored in airtight packaging.

Usage Of ODS (Ozone Depleting Substances)

The company does not use ODS such as CCl4 (Carbon Tetrachloride) and HCFC in its production processes.

Notes

• If the product is designated as "Unitary lead free", it complies with RoHS directive requirements.
• This specification guarantees the quality of the product as a single unit. Ensure your product has been evaluated and confirmed against your specifications when this product is mounted.
• The company does not warrant against failure caused by any use of the product that deviates from the intended use as described in this product specification.