thick film chip network resistors FH RC MT08W560JT compliant with RoHS and halogen free requirements
Product Overview
These thick film chip network resistors are designed for high reliability and stable electrical performance. They feature a miniature and lightweight design, making them suitable for automatic SMT equipment and reflow soldering processes. The resistors offer superior mechanical strength and high-frequency characteristics, with low assembly costs. They comply with RoHS and Halogen-free requirements.
Product Attributes
- Compliance: RoHS Compliant, Halogen-free requirement
Technical Specifications
Product Code Structure: RC-M [Model] [Tolerance Code] [Terminal Style] [Packaging Style Code]
Model Types:
- RCMT08
- RCML08
- RCMY08
Dimensions (mm):
| Model | L | W | t | P | a | c | b | a1 |
|---|---|---|---|---|---|---|---|---|
| RCMT08 | 2.00 0.10 | 1.60 0.15 | 0.50 0.10 | 0.40 0.10 | 0.30 0.10 | 0.25 0.10 | 0.30 0.15 | 0.40 0.10 |
| RCML08 | 3.20 0.15 | 2.00 0.10 | 0.60 0.10 | 0.60 0.10 | 0.40 0.10 | 0.30 0.10 | 0.30 0.20 | 0.60 0.10 |
| RCMY08 | 1.00 0.10 | 0.50 0.10 | 0.35 0.10 | 0.40 0.10 | 0.20 0.10 | 0.15 0.05 | 0.20 0.10 | 0.40 0.10 |
Resistance Tolerance Code:
| Code | Tolerance |
|---|---|
| F | 1% |
| J | 5% |
| G | 2% |
| D | 0.5% |
| K | 10% |
Resistance Value Code:
- Three digits (E-24 series): First two digits are significant figures, third denotes number of zeros.
- Four digits (E-96 series): First three digits are significant figures, fourth denotes number of zeros.
- 'R' denotes decimal point.
- Examples: 103=10k, 1003=100k, 1R0=1.0
Terminal Style:
| Code | Style |
|---|---|
| W | Convex type with corner |
| P | Flat type with corner |
Packaging Style Code:
| Code | Style |
|---|---|
| T | Tape & Reel |
| C | Case (Bulk) |
Chip Jumper Specifications:
| Model | Resistance Tolerance Code | Tolerance | Resistance Value Code | Terminal Style | Packaging Style Code | Packaging Style | Terminal Number | Resistor Number | Rated Power at 70 (W) | Rated Current at 70 (A) | Max. Overload Current (A) | Limiting Element Voltage (V) | Max. Overload Voltage (V) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| RCMT08 | F, G, J | 1%, 2%, 5% | 50m | W | T | Tape & Reel | 8 | 4 | 1/16 | 50 | 100 | 50 | 100 |
| RCML08 | F, G, J | 1%, 2%, 5% | 50m | W | T | Tape & Reel | 8 | 4 | 1/16 | 50 | 100 | 50 | 100 |
General Specifications:
| Item | Specifications | Test Methods (IEC 60115-1) |
|---|---|---|
| Solderability | Solderable area 95% | 4.17 |
| Resistance to Soldering Heat | No mechanical damage | 4.18 |
| T.C.R. (ppm/) | 400, 200, 250, 100 | 4.8 |
| Rapid Change of Temperature | No mechanical damage | 4.13 |
| Short Time Overload | No mechanical damage | 4.39 |
| Shear Test | No mechanical damage | 4.32 |
| Substrate Bending Test | No mechanical damage | 4.33 |
| Component Solvent Resistance | No mechanical damage | 4.29 |
| Insulation Resistance | 1000M | 4.6 |
| Endurance at Upper Category Temperature | No mechanical damage | 4.25.3 |
| Endurance at 70 | No mechanical damage | 4.25.1 |
| Damp Heat, Steady State | No mechanical damage | 4.24 |
Packaging Quantity:
| Model | Packaging Style | Quantity (pcs) |
|---|---|---|
| 01005 | Tape & Reel | 20000 |
| 0201 | Tape & Reel | 20000 |
| 0402 | Tape & Reel | 20000 |
| 0603 | Tape & Reel | 10000 |
| 0805 | Tape & Reel | 5000 |
| 1206 | Tape & Reel | 4000 |
| 1210 | Tape & Reel | 4000 |
| 2010 | Tape & Reel | 4000 |
| 2512 | Tape & Reel | 4000 |
| RCMY08 | Tape & Reel | 20000 |
| RCMT08 | Tape & Reel | 20000 |
| RCML08 | Tape & Reel | 10000 |
| 01005 | Case (Bulk) | 50000 |
| 0201 | Case (Bulk) | 10000 |
| 0402 | Case (Bulk) | 4000 |
| 0603 | Case (Bulk) | 4000 |
| 0805 | Case (Bulk) | 4000 |
| 1206 | Case (Bulk) | 4000 |
| 1210 | Case (Bulk) | 4000 |
| 2010 | Case (Bulk) | 4000 |
| 2512 | Case (Bulk) | 4000 |
| RCMY08 | Case (Bulk) | 10000 |
| RCMT08 | Case (Bulk) | 5000 |
| RCML08 | Case (Bulk) | 4000 |
Precautions for Use:
- Avoid exceeding rated power.
- Handle with care to avoid chipping.
- Soldering tip should not touch the product during manual installation.
- Storage conditions: Temperature 5~30, Relative Humidity 30%~70%. Recommended use within six months.
- Contact sales for use in automotive, medical, or aerospace equipment.
- Be aware of potential cracking due to thermal stress differences between the alumina substrate and mounting board.
Recommended Solder Alloy: 96.5Sn/3.0Ag/0.5Cu
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.