compact FOJAN FRC0603F1003TS thick film chip resistor suitable for computers and entertainment systems

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

FRC-Series Thick Film Chip Resistor

The FRC-Series Thick Film Chip Resistor is a compact and lightweight component designed for high reliability. It is suitable for a wide range of applications including entertainment systems, appliances, computers, communication equipment, power supplies, illumination, and measuring instruments.

Product Attributes

Brand: FOJAN
Product Type: Thick Film Chip Resistor
Features: Small size, light weight, reliability, high quality

Technical Specifications

Type	L (mm)	W (mm)	H (mm)	T1 (mm)	T2 (mm)	Rated Power (at 70)	Max. Working Voltage (RCWV)	Max. Overload Voltage	T.C.R. (PPM/)	Resistance Range
0201	0.600.03	0.300.03	0.230.03	0.100.05	0.150.05	1/20W	25V	50V	400 (1~10) 200 (10~10M)	1~10M
0402	1.000.05	0.500.05	0.350.05	0.200.10	0.250.10	1/16W	50V	100V	200 (1~10) 100 (10~10M) 100 (10M~22M)	1~22M
0603	1.600.10	0.800.10	0.450.10	0.250.15	0.250.15	1/10W	75V	150V	200 (1~10) 100 (10~10M) 100 (10M~22M)	1~22M
0805	2.000.10	1.250.10	0.500.10	0.350.20	0.400.20	1/8W	150V	300V	200 (1~10) 100 (10~10M) 100 (10M~22M)	1~22M
1206	3.100.10	1.600.10	0.550.10	0.450.20	0.450.20	1/4W	200V	400V	200 (1~10) 100 (10~10M) 100 (10M~22M)	1~22M
1210	3.100.10	2.500.15	0.550.10	0.450.15	0.500.20	1/2W	200V	400V	200 (1~10) 100 (10~10M) 100 (10M~22M)	1~22M
1218	3.100.10	4.600.10	0.550.10	0.450.20	0.400.20	1W	200V	500V	200 (1~10) 100 (10~1M)	1~1M
1812	4.500.20	3.100.20	0.550.10	0.550.20	0.700.20	3/4W	200V	400V	200 (1~10) 100 (10~10M)	1~10M
2010	5.000.10	2.500.15	0.550.10	0.450.15	0.500.20	3/4W	200V	400V	200 (1~10) 100 (10~10M) 100 (10M~22M)	1~22M
2512	6.350.10	3.100.15	0.550.10	0.600.20	0.900.20	1W	200V	400V	200 (1~10) 100 (10~10M) 100 (10M~22M)	1~22M

Performance Specifications

Item	Test Method	Test Conditions	Specification
Temperature Coefficient	JIS C 5201 4.8 / IEC60115-1-4.8	TCR=R-R0/t-t0R0 10ppm R0: resistance at room temperature; R: resistance at 125 or -55; t0: room temperature; t: test temperature (125 or -55)	As SPEC
Short-time overload	JIS C 5201 4.13 / IEC60115-1-4.13	Applied 2.5 times of rated voltage for 5 seconds. Measure the variation of resistance.	0.5%, 1%: (1.0%+0.05) 5%: (2.0%+0.05)
Solderability	JIS C 5201 4.17 / IEC60115-1-4.17	Dip the terminal in a flux and then dip into a soldering bath at 2455 for 30.5sec.	95% coverage
Resist to soldering heat	JIS C 5201 4.18 / IEC 60115-1-4.18	Dip the terminal in a flux and then dip into a soldering bath at 2605 for 10 0.5sec. Measure the variation of resistance.	(1.00% +0.05)
Insulation resistance	JIS C 5201 4.6 / IEC60115-1-4.6	Applied the dielectric withstanding voltage on the center of body for 60 5seconds. Then measure insulation resistance.	>10G
Dielectric withstanding voltage	JIS C 5201 4.7 / IEC60115-1-4.7	Applied the dielectric withstanding voltage on the center of body for 60 5seconds.	No evidence of flashover, arcing or insulation breakdown
Terminal bending	JIS C 5201 4.33 / IEC60115-1-4.33	Specimen shall be mounted on test board, then bend the board and maintained for 20 1s. the distance of bending is 5+0.2/0 mm for resistors which size no larger than 1206 or 2+0.2/0 mm which size larger than 1206. Measure the variation of resistance.	(1.00% +0.05)
Rapid temperature changes	JIS C 5201 4.19 / IEC60115-1-4.19	Put specimen in a chamber which temperature can be T1-553T2 1553/1253, 30min, repeated 300 cycles. Measure the variation of resistance.	0.5%, 1%: (1.0%+0.05) 5%: (2.0%+0.05)
Humidity	JIS C 5201 4.24 / IEC60115-1-4.24	Put resistor in a constant temperature and humidity chamber, temperature 402, humidity 90~95 %RH; apply rated voltage for 1.5 hours, power off for 0.5 hours; repeat power on/off until test time is 1000 +48/-0 hours. Measure the variation of resistance.