Compact FOJAN FRC0603F4701TS thick film chip resistor suitable for electronic devices and communication equipment
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
FRC-Series Thick Film Chip Resistor
The FRC-Series Thick Film Chip Resistor is a reliable and high-quality electronic component designed for a wide range of applications. Its small size and light weight make it ideal for compact electronic devices. This resistor is suitable for use in entertainment systems, appliances, computers, communication equipment, power supplies, illumination, and measuring instruments.
Product Attributes
- Brand: FOJAN
- Product Type: Thick Film Chip Resistor
- Material: Ceramic substrate (Al2O3), Conductive layer (Ag), Resistive layer (RuO2+ glass), Outer Protective layer (Epoxy), Plating (Ni/Sn)
Technical Specifications
| Type | Rated Power (at 70) | Max. Working Voltage (RCWV) | Max. Overload Voltage | Resistance Range | T.C.R. (PPM/) | Dimensions (L x W x H) |
|---|---|---|---|---|---|---|
| 0201 | 1/20W | 25V | 50V | 1~10 (400), 10~10M (200) | 400 / 200 | 0.600.03 x 0.300.03 x 0.230.03 mm |
| 0402 | 1/16W | 50V | 100V | 1~10 (200), 10~10M (100), 10M~22M (200) | 200 / 100 | 1.000.05 x 0.500.05 x 0.350.05 mm |
| 0603 | 1/10W | 75V | 150V | 1~10 (200), 10~10M (100), 10M~22M (200) | 200 / 100 | 1.600.10 x 0.800.10 x 0.450.10 mm |
| 0805 | 1/8W | 150V | 300V | 1~10 (200), 10~10M (100), 10M~22M (200) | 200 / 100 | 2.000.10 x 1.250.10 x 0.500.10 mm |
| 1206 | 1/4W | 200V | 400V | 1~10 (200), 10~10M (100), 10M~22M (200) | 200 / 100 | 3.100.10 x 1.600.10 x 0.550.10 mm |
| 1210 | 1/2W | 200V | 400V | 1~10 (200), 10~10M (100), 10M~22M (200) | 200 / 100 | 3.100.10 x 2.500.15 x 0.550.10 mm |
| 1218 | 1W | 200V | 500V | 1~10 (200), 10~1M (100) | 200 / 100 | 3.100.10 x 4.600.10 x 0.550.10 mm |
| 1812 | 3/4W | 200V | 400V | 1~10 (200), 10~10M (100) | 200 / 100 | 4.500.20 x 3.100.20 x 0.550.10 mm |
| 2010 | 3/4W | 200V | 400V | 1~10 (200), 10~10M (100), 10M~22M (200) | 200 / 100 | 5.000.10 x 2.500.15 x 0.550.10 mm |
| 2512 | 1W | 200V | 400V | 1~10 (200), 10~10M (100), 10M~22M (200) | 200 / 100 | 6.350.10 x 3.100.15 x 0.550.10 mm |
Performance Specifications
| Item | Test Methods | Test Conditions | Specification |
|---|---|---|---|
| Temperature Coefficient | JIS C 5201 4.8 / IEC60115-1-4.8 | TCR=R-R0/t-t0R0 10ppm R0: resistance at room temperature, R: resistance at 125 or -55, t0: room temperature, t: test temperature (125 or -55) | As SPEC |
| Short-time overload | JIS C 5201 4.13 / IEC60115-1-4.13 | Applied 2.5 times of rated voltage for 5 seconds. Measure the variation of resistance. | 0.5%, 1%: (1.0%+0.05), 5%: (2.0%+0.05) |
| Solderability | JIS C 5201 4.17 / IEC60115-1-4.17 | Dip the terminal in a flux and then dip into a soldering bath at 2455 for 30.5sec. | 95% coverage |
| Resist to soldering heat | JIS C 5201 4.18 / IEC 60115-1-4.18 | Dip the terminal in a flux and then dip into a soldering bath at 2605 for 10 0.5sec. Measure the variation of resistance. | (1.00% +0.05) |
| Insulation resistance | JIS C 5201 4.6 / IEC60115-1-4.6 | Applied the dielectric withstanding voltage on the center of body for 605 seconds. Then measure insulation resistance. | >10G |
| Dielectric withstanding voltage | JIS C 5201 4.7 / IEC60115-1-4.7 | Applied the dielectric withstanding voltage on the center of body for 605 seconds. | No evidence of flashover, arcing or insulation breakdown, mechanical damage |
| Terminal bending | JIS C 5201 4.33 / IEC60115-1-4.33 | Specimen shall be mounted on test board, then bend the board and maintained for 201s. Bending distance: 5+0.2/0 mm (1206 size), 2+0.2/0 mm (>1206 size). Measure the variation of resistance. | (1.00% +0.05) |
| Rapid temperature changes | JIS C 5201 4.19 / IEC60115-1-4.19 | Put specimen in a chamber with temperature cycles: T1: -553; T2: 1553/1253, 30min per cycle, 300 cycles. Measure the variation of resistance. | 0.5%, 1%: (1.0%+0.05), 5%: (2.0%+0.05) |
| Humidity | JIS C 5201 4.24 / IEC60115-1-4.24 | Place specimen in a constant temperature and humidity chamber (402, 90~95 %RH). Apply rated voltage for 1.5 hours, then power off for 0.5 hours. Repeat power on/off for 1000 +48/-0 hours. Measure the variation of resistance. | As SPEC |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina