Durable FOJAN FRC0603F1201TS Thick Film Chip Resistor with Ceramic Substrate and Protective Epoxy Layer

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

FRC-Series Thick Film Chip Resistor

The FRC-Series Thick Film Chip Resistor is a reliable, high-quality component designed for a wide range of electronic applications. Its small size and light weight make it ideal for compact designs. This series is suitable for entertainment systems, appliances, computers, communication equipment, power supplies, and measuring instruments.

Product Attributes

Brand: FOJAN
Material: Ceramic substrate (Al2O3), Conductive layer (Ag), Resistive layer (RuO2+ glass), Outer Protective layer (Epoxy), Plating (Ni, Sn)

Technical Specifications

Type	Rated Power (at 70)	Max. Working Voltage	Max. Overload Voltage	Resistance Range	T.C.R. (PPM/)	Dimensions (L x W x H) mm	Rated Current of Jumper	Max Current of Jumper
0201	1/20W	25V	50V	1~10, 10~10M	400 (1~10), 200 (10~10M)	0.600.03 x 0.300.03 x 0.230.03	0.5A	1A
0402	1/16W	50V	100V	1~10, 10~22M	200 (1~10), 100 (10~22M)	1.000.05 x 0.500.05 x 0.350.05	1A	2A
0603	1/10W	75V	150V	1~10, 10~22M	200 (1~10), 100 (10~22M)	1.600.10 x 0.800.10 x 0.450.10	1A	2A
0805	1/8W	150V	300V	1~10, 10~22M	200 (1~10), 100 (10~22M)	2.000.10 x 1.250.10 x 0.500.10	2A	5A
1206	1/4W	200V	400V	1~10, 10~22M	200 (1~10), 100 (10~22M)	3.100.10 x 1.600.10 x 0.550.10	2A	10A
1210	1/2W	200V	400V	1~10, 10~22M	200 (1~10), 100 (10~22M)	3.100.10 x 2.500.15 x 0.550.10	2A	10A
1218	1W	200V	500V	1~10, 10~1M	200 (1~10), 100 (10~1M)	3.100.10 x 4.600.10 x 0.550.10	6A	10A
1812	3/4W	200V	400V	1~10, 10~10M	200 (1~10), 100 (10~10M)	4.500.20 x 3.100.20 x 0.550.10	2A	10A
2010	3/4W	200V	400V	1~10, 10~22M	200 (1~10), 100 (10~22M)	5.000.10 x 2.500.15 x 0.550.10	2A	10A
2512	1W	200V	400V	1~10, 10~22M	200 (1~10), 100 (10~22M)	6.350.10 x 3.100.15 x 0.550.10	2A	10A

Performance Specifications

Item	Test Methods	Test Conditions	Specification
Temperature Coefficient	JIS C 5201 4.8 / IEC60115-1-4.8	TCR=R-R0/t-t0R0 10ppm R0: resistance at room temperature R: resistance at 125 or -55 t0: room temperature t: test temperature 125 or -55	As SPEC
Short-time overload	JIS C 5201 4.13 / IEC60115-1-4.13	Applied 2.5 times of rated voltage for 5 second. Measure the variation of resistance.	0.5%, 1%: (1.0%+0.05) 5%: (2.0%+0.05)
Solderability	JIS C 5201 4.17 / IEC60115-1-4.17	Dip the terminal in a flux and then dip into a soldering bath at 2455 for 30.5sec.	95% coverage
Resist to soldering heat	JIS C 5201 4.18 / IEC 60115-1-4.18	Dip the terminal in a flux and then dip into a soldering bath at 2605 for 10 0.5sec. Measure the variation of resistance.	(1.00% +0.05)
Insulation resistance	JIS C 5201 4.6 / IEC60115-1-4.6	Applied the dielectric withstanding voltage on the center of body for 605 seconds. Then measure insulation resistance.	>10G
Dielectric withstanding voltage	JIS C 5201 4.7 / IEC60115-1-4.7	Applied the dielectric withstanding voltage on the center of body for 605 seconds.	No evidence of flashover, arcing or insulation breakdown
Terminal bending	JIS C 5201 4.33 / IEC60115-1-4.33	Specimen shall be mounted on test board, then bend the board and maintained for 201s. the distance of bending is 5+0.2/0 mm for resistors which size no larger than 1206 or 2+0.2/0 mm which size larger than 1206. Measure the variation of resistance.	(1.00% +0.05)
Rapid temperature changes	JIS C 5201 4.19 / IEC60115-1-4.19	Put specimen in a chamber which temperature can be T1-553T2 1553/1253, 30minrepeated 300 cycles. Measure the variation of resistance.	0.5%, 1%: (1.0%+0.05) 5%: (2.0%+0.05)
Humidity	JIS C 5201 4.24 / IEC60115-1-4.24	Put resistor in a constant temperature and humidity chamber, temperature 402, humidity 90~95 %RH; apply rated voltage for 1.5 hours, then power off for 0.5 hours; repeat power on/off until test time is 1000 +48/-0 hours. Measure the variation of resistance.	As SPEC