High power thick film chip resistor FOJAN FRP2512J100 TS ideal for applications demanding performance
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
High Power Thick Film Chip Resistor (FRP Series)
The FRP Series High Power Thick Film Chip Resistors are designed for applications requiring stable electrical performance and high reliability in a miniature and lightweight package. These resistors are compliant with RoHS directives and halogen-free requirements, making them suitable for a wide range of electronic devices. Their high power handling capability makes them ideal for over-current protection and voltage regulation.
Product Attributes
- Brand: FOJAN
- Product Type: High Power Thick Film Chip Resistor
- Certifications: RoHS compliant, Halogen free
Technical Specifications
| Type | L (mm) | W (mm) | H (mm) | T1 (mm) | T2 (mm) | Rated Power at 70C | Max Working Voltage | Max Overload Voltage | Resistance Range | Zero Ohm Rated Current | Zero Ohm Max Current | Temperature Coefficient (ppm/C) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 0402 | 1.000.05 | 0.500.05 | 0.350.05 | 0.200.10 | 0.250.10 | 1/10W | 50V | 100V | 1-10M | 1A | 3A | 100 (10R1M), 400 (1R10) |
| 0603 | 1.600.10 | 0.800.10 | 0.450.10 | 0.250.15 | 0.250.15 | 1/5W | 75V | 150V | 1-10M | 1A | 4A | 100 (10R1M), 400 (1R10) |
| 0805 | 2.000.10 | 1.250.10 | 0.500.10 | 0.350.20 | 0.400.20 | 1/4W | 150V | 300V | 1-10M | 2A | 5A | 100 (10R1M), 400 (1R10) |
| 1206 | 3.100.10 | 1.600.10 | 0.550.10 | 0.450.20 | 0.450.20 | 1/2W | 200V | 400V | 1-10M | 2A | 10A | 100 (10R1M), 400 (1R10) |
| 1210 | 3.100.10 | 2.500.15 | 0.550.10 | 0.450.15 | 0.500.20 | 3/4W | 200V | 400V | 1-10M | 2A | 10A | 100 (10R1M), 400 (1R10) |
| 1812 | 4.500.20 | 3.100.20 | 0.550.10 | 0.550.20 | 0.700.20 | 1W | 200V | 500V | 1-10M | 2A | 12A | 100 (10R1M), 400 (1R10) |
| 2010 | 5.000.10 | 2.500.15 | 0.550.10 | 0.450.15 | 0.500.20 | 1W | 200V | 400V | 1-10M | 2A | 12A | 100 (10R1M), 400 (1R10) |
| 2512 | 6.350.10 | 3.100.15 | 0.550.10 | 0.600.20 | 0.900.20 | 2W | 200V | 400V | 1-10M | 2A | 12A | 100 (10R1M), 400 (1R10) |
Construction Materials
| No. | Construction | Major Material |
|---|---|---|
| 1 | Ceramic substrate | Al2O3 |
| 2 | Conductive layer(Top | Ag |
| 3 | Side conductive layer | NiCr |
| 4 | Resistive layer | RuO2 |
| 5 | Inner protective layer | Glass |
| 6 | Outer Protective layer | Epoxy |
| 7 | Marking | Epoxy |
| 8 | Ni plating layer | Ni |
| 9 | Ni plating layer | Ni |
| 10 | Conductive layer(Back | Ag |
Performance
| Item | Test Method | Test Conditions | Specification |
|---|---|---|---|
| Short-time overload | JIS C 5201 4.13 | Applied 5 times of rated power for 5 second. Measure the variation of resistance. | (1.0%+0.05) for 1% tolerance; (2.0%+0.05) for 5% tolerance |
| Solderability | JIS C 5201 4.17 | Dip the terminal in a flux and then dip into a soldering bath at 2455 for 30.5sec. | 95% coverage |
| Resist to soldering heat | JIS C 5201 4.18 | Dip the terminal in a flux and then dip into a soldering bath at 2605 for 100.5sec. Measure the variation of resistance. | (1.00% +0.05) |
| Insulation resistance | JIS C 5201 4.6 | Applied the dielectric withstanding voltage on the center of body for 605seconds. Then measure insulation resistance. | >10G |
| Dielectric withstanding voltage | JIS C 5201 4.7 | Applied the dielectric withstanding voltage on the center of body for 605seconds. | No evidence of flashover, arcing or insulation breakdown |
| Rapid temperature changes | JIS C 5201 4.19 | T1-553T21553/1253, 30min, 300 cycles. Measure the variation of resistance. | (1.0%+0.05) for 1% tolerance; (2.0%+0.05) for 5% tolerance |
| Moisture resistance | MIL-STD-202 METHOD 106 | 10 cycles (25C~65C, 90~100%RH, 2.5H; 65C 90~100%RH, 3H; 65C~25C 80~100%RH, 2.5H). Measurement at 244 hours after test conclusion. | (1.0%+0.05) for 1% tolerance; (2.0%+0.05) for 5% tolerance |
| Terminal bending | JIS C 5201 4.33 | Bend the board for 201s. Bending distance: 5+0.2/0 mm (1206), 2+0.2/0 mm (>1206). Measure the variation of resistance. | (1.00% +0.05) |
| Humidity | JIS C 5201 4.24 | 402, 90~95%RH. Rated voltage ON 1.5H, OFF 0.5H, repeated for 1000+48/-0 H. Measure the variation of resistance. | (1.0%+0.05) for 1% tolerance; (2.0%+0.05) for 5% tolerance |
| Load life | JIS C 5201 4.25.1 | 702. ON TIME:1.5H, OFF TIME:0.5H, Rated voltage for 1000+24/-0H. Measure the variation of resistance. | (1.0%+0.05) for 1% tolerance; (2.0%+0.05) for 5% tolerance |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina