Compact thick film chip resistor FOJAN FRC0805F49R9TS ideal component for electronic circuit designs

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

FRC-Series Thick Film Chip Resistor

The FRC-Series Thick Film Chip Resistor is a reliable and high-quality component designed for a wide range of electronic applications. Its small size and light weight make it ideal for compact designs.

Product Attributes

Brand: FOJAN
Product Type: Thick Film Chip Resistor
Material: Ceramic substrate (Al2O3), Conductive layer (Ag), Resistive layer (RuO2+ glass), Outer Protective layer (Epoxy)

Application Scenarios

Entertainment: Stereo, TV tuners, Tape recorders
Appliances: Air conditioners, Refrigerators
Computers & related products: Main boards, PDAs
Communication equipment: Cell phones, Fax machines
Power equipment: Power supplies, Illumination equipment
Measuring instruments: Electric meters, Navigation equipment

Technical Specifications

Type	Rated Power (at 70)	Max. Working Voltage (RCWV)	Max Overload Voltage	T.C.R. (PPM/)	Resistance Range	Dimensions (L x W x H)
0201	1/20W	25V	50V	400 (1~10) 200 (10~10M)	1~10M	0.600.03 x 0.300.03 x 0.230.03 mm
0402	1/16W	50V	100V	200 (1~10) 100 (10~10M) 10M~22M	1~22M	1.000.05 x 0.500.05 x 0.350.05 mm
0603	1/10W	75V	150V	200 (1~10) 100 (10~10M) 10M~22M	1~22M	1.600.10 x 0.800.10 x 0.450.10 mm
0805	1/8W	150V	300V	200 (1~10) 100 (10~10M) 10M~22M	1~22M	2.000.10 x 1.250.10 x 0.500.10 mm
1206	1/4W	200V	400V	200 (1~10) 100 (10~10M) 10M~22M	1~22M	3.100.10 x 1.600.10 x 0.550.10 mm
1210	1/2W	200V	400V	200 (1~10) 100 (10~10M) 10M~22M	1~22M	3.100.10 x 2.500.15 x 0.550.10 mm
1218	1W	200V	500V	200 (1~10) 100 (10~1M)	1~1M	3.100.10 x 4.600.10 x 0.550.10 mm
1812	3/4W	200V	400V	200 (1~10) 100 (10~10M)	1~10M	4.500.20 x 3.100.20 x 0.550.10 mm
2010	3/4W	200V	400V	200 (1~10) 100 (10~10M) 10M~22M	1~22M	5.000.10 x 2.500.15 x 0.550.10 mm
2512	1W	200V	400V	200 (1~10) 100 (10~10M) 10M~22M	1~22M	6.350.10 x 3.100.15 x 0.550.10 mm

Performance Specifications

Item	Test Methods	Test Conditions	Specification
Temperature Coefficient	JIS C 5201 4.8 / IEC60115-1-4.8	TCR=R-R0 /t-t0R0 10⁶ppm R0: resistance at room temperature R: resistance at 125 or -55 t0: room temperature t: test temperature (125 or -55)	As SPEC
Short-time overload	JIS C 5201 4.13 / IEC60115-1-4.13	Applied 2.5 times of rated voltage for 5 seconds. Measure the variation of resistance.	0.5%, 1%: (1.0%+0.05) 5%: (2.0%+0.05)
Solderability	JIS C 5201 4.17 / IEC60115-1-4.17	Dip the terminal in a flux and then dip into a soldering bath at 2455 for 30.5sec.	95% coverage
Resist to soldering heat	JIS C 5201 4.18 / IEC 60115-1-4.18	Dip the terminal in a flux and then dip into a soldering bath at 2605 for 10 0.5sec. Measure the variation of resistance.	(1.00% +0.05)
Insulation resistance	JIS C 5201 4.6 / IEC60115-1-4.6	Applied the dielectric withstanding voltage on the center of body for 60 5seconds. Then measure insulation resistance.	>10G
Dielectric withstanding voltage	JIS C 5201 4.7 / IEC60115-1-4.7	Applied the dielectric withstanding voltage on the center of body for 60 5seconds.	No evidence of flashover, arcing or insulation breakdown
Terminal bending	JIS C 5201 4.33 / IEC60115-1-4.33	Specimen shall be mounted on test board, then bend the board and maintained for 20 1s. the distance of bending is 5+0.2/0 mm for resistors which size no larger than 1206 or 2+0.2/0 mm which size larger than 1206. Measure the variation of resistance.	(1.00% +0.05)
Rapid temperature changes	JIS C 5201 4.19 / IEC60115-1-4.19	Put specimen in a chamber which temperature can be T1-553T2 1553/1253, 30minrepeated 300 cycles. Measure the variation of resistance.	0.5%, 1%: (1.0%+0.05) 5%: (2.0%+0.05)
Humidity	JIS C 5201 4.24 / IEC60115-1-4.24	Put resistor in a constant temperature and humidity chamber, temperature 402, humidity 90~95 %RH; apply rated voltage for 1.5 hours, then power off for 0.5 hours; repeat power on/off until test time is 1000 +48/-0 hours. Measure the variation of resistance.	(1.00% +0.05)