electronic component FOJAN FRC1206J820 TS thick film chip resistor for compact device applications

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

FRC-Series Thick Film Chip Resistor

The FRC-Series Thick Film Chip Resistor is a reliable, high-quality component designed for a wide range of electronic applications. Its small size and light weight make it ideal for compact designs. Applications include entertainment systems, appliances, computers, communication equipment, power supplies, illumination, and measuring instruments.

Product Attributes

Brand: FOJAN
Product Type: Thick Film Chip Resistor
Material: Ceramic substrate (Al2O3), Conductive layer (Ag), Resistive layer (RuO2+ glass), Protective layer (Epoxy), Plating (Ni, Sn)

Technical Specifications

Type	Rated Power (at 70)	Max. Working Voltage (RCWV)	Max. Overload Voltage	Resistance Range	T.C.R. (PPM/)	Dimensions (L x W x H)	Rated Current of Jumper
0201	1/20W	25V	50V	1~10, 10~10M	400 (1~10), 200 (10~10M)	0.600.03 x 0.300.03 x 0.230.03 mm	0.5A
0402	1/16W	50V	100V	1~10, 10~22M	200 (1~10), 100 (10~22M)	1.000.05 x 0.500.05 x 0.350.05 mm	1A
0603	1/10W	75V	150V	1~10, 10~22M	200 (1~10), 100 (10~22M)	1.600.10 x 0.800.10 x 0.450.10 mm	1A
0805	1/8W	150V	300V	1~10, 10~22M	200 (1~10), 100 (10~22M)	2.000.10 x 1.250.10 x 0.500.10 mm	2A
1206	1/4W	200V	400V	1~10, 10~22M	200 (1~10), 100 (10~22M)	3.100.10 x 1.600.10 x 0.550.10 mm	2A
1210	1/2W	200V	400V	1~10, 10~22M	200 (1~10), 100 (10~22M)	3.100.10 x 2.500.15 x 0.550.10 mm	2A
1218	1W	200V	500V	1~10, 10~1M	200 (1~10), 100 (10~1M)	3.100.10 x 4.600.10 x 0.550.10 mm	6A
1812	3/4W	200V	400V	1~10, 10~10M	200 (1~10), 100 (10~10M)	4.500.20 x 3.100.20 x 0.550.10 mm	2A
2010	3/4W	200V	400V	1~10, 10~22M	200 (1~10), 100 (10~22M)	5.000.10 x 2.500.15 x 0.550.10 mm	2A
2512	1W	200V	400V	1~10, 10~22M	200 (1~10), 100 (10~22M)	6.350.10 x 3.100.15 x 0.550.10 mm	2A

Performance Specifications

Item	Test Method	Test Conditions	Specification
Temperature Coefficient	JIS C 5201 4.8 / IEC60115-1-4.8	TCR=R-R0 /t-t0R0 106ppm R0: resistance at room temperature, R: resistance at 125 or -55, t0: room temperature, t: 125 or -55	As SPEC
Short-time overload	JIS C 5201 4.13 / IEC60115-1-4.13	Applied 2.5 times of rated voltage for 5 seconds. Measure the variation of resistance.	0.5%, 1%: (1.0%+0.05); 5%: (2.0%+0.05)
Solderability	JIS C 5201 4.17 / IEC60115-1-4.17	Dip in flux, then dip into a soldering bath at 2455 for 30.5sec.	95% coverage
Resist to soldering heat	JIS C 5201 4.18 / IEC 60115-1-4.18	Dip in flux, then dip into a soldering bath at 2605 for 100.5sec. Measure the variation of resistance.	(1.00% +0.05)
Insulation resistance	JIS C 5201 4.6 / IEC60115-1-4.6	Applied dielectric withstanding voltage on the center of body for 605 seconds. Then measure insulation resistance.	>10G
Dielectric withstanding voltage	JIS C 5201 4.7 / IEC60115-1-4.7	Applied dielectric withstanding voltage on the center of body for 605 seconds.	No evidence of flashover, arcing or insulation breakdown
Terminal bending	JIS C 5201 4.33 / IEC60115-1-4.33	Mounted on test board, bend board for 201s. Bending distance: 5+0.2/0 mm (1206), 2+0.2/0 mm (>1206). Measure resistance variation.	(1.00% +0.05)
Rapid temperature changes	JIS C 5201 4.19 / IEC60115-1-4.19	Temperature cycle: T1: -553; T2: 1553/1253, 30min each, 300 cycles. Measure resistance variation.	0.5%, 1%: (1.0%+0.05); 5%: (2.0%+0.05)
Humidity	JIS C 5201 4.24 / IEC60115-1-4.24	Constant temperature and humidity chamber: 402, 90~95%RH. Applied rated voltage for 1.5 hours, power off for 0.5 hours. Repeat for 1000 +48/-0 hours. Measure resistance variation.