Compact FOJAN FRC0402F2202TS chip resistor suitable for electronic communication and entertainment systems

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

FRC-Series Thick Film Chip Resistor

The FRC-Series Thick Film Chip Resistor is a reliable, high-quality component designed for a wide range of electronic applications. Featuring a small size and light weight, these resistors are suitable for entertainment systems, appliances, computers, communication equipment, power supplies, illumination, and measuring instruments.

Product Attributes

Brand: FOJAN
Product Type: Thick Film Chip Resistor
Material: Ceramic substrate (Al2O3), Silver (Ag), Nickel Chromium Alloy (NiCr), Ruthenium Oxide + Glass (RuO2+ glass), Glass, Epoxy Resin, Nickel (Ni), Matte Tin (Sn)

Technical Specifications

Type	Rated Power (at 70)	Max. Working Voltage (RCWV)	Max Overload Voltage	T.C.R. (PPM/)	Resistance Range	Dimension (L x W x H)	Rated Current of Jumper	Max Current of Jumper
0201	1/20W	25V	50V	400 (1~10) 200 (10~10M)	1~10M	0.60 0.03 x 0.30 0.03 x 0.23 0.03 mm	0.5A	1A
0402	1/16W	50V	100V	200 (1~10) 100 (10~10M) 10M~22M	1~22M	1.00 0.05 x 0.50 0.05 x 0.35 0.05 mm	1A	2A
0603	1/10W	75V	150V	200 (1~10) 100 (10~10M) 10M~22M	1~22M	1.60 0.10 x 0.80 0.10 x 0.45 0.10 mm	1A	2A
0805	1/8W	150V	300V	200 (1~10) 100 (10~10M) 10M~22M	1~22M	2.00 0.10 x 1.25 0.10 x 0.50 0.10 mm	2A	5A
1206	1/4W	200V	400V	200 (1~10) 100 (10~10M) 10M~22M	1~22M	3.10 0.10 x 1.60 0.10 x 0.55 0.10 mm	2A	10A
1210	1/2W	200V	400V	200 (1~10) 100 (10~10M) 10M~22M	1~22M	3.10 0.10 x 2.50 0.15 x 0.55 0.10 mm	2A	10A
1218	1W	200V	500V	200 (1~10) 100 (10~1M)	1~1M	3.10 0.10 x 4.60 0.10 x 0.55 0.10 mm	6A	10A
1812	3/4W	200V	400V	200 (1~10) 100 (10~10M)	1~10M	4.50 0.20 x 3.10 0.20 x 0.55 0.10 mm	2A	10A
2010	3/4W	200V	400V	200 (1~10) 100 (10~10M) 10M~22M	1~22M	5.00 0.10 x 2.50 0.15 x 0.55 0.10 mm	2A	10A
2512	1W	200V	400V	200 (1~10) 100 (10~10M) 10M~22M	1~22M	6.35 0.10 x 3.10 0.15 x 0.55 0.10 mm	2A	10A

Item	Test Method	Test Conditions	Specification
Temperature Coefficient	JIS C 5201 4.8 / IEC60115-1-4.8	TCR= (R-R0)/(t-t0)R0 10⁶ (ppm) R0: resistance at room temperature, R: resistance at 125 or -55, t0: room temperature, t: test temperature (125 or -55)	As SPEC
Short-time overload	JIS C 5201 4.13 / IEC60115-1-4.13	Applied 2.5 times of rated voltage for 5 seconds. Measure the variation of resistance.	0.5%, 1%: (1.0%+0.05) 5%: (2.0%+0.05)
Solderability	JIS C 5201 4.17 / IEC60115-1-4.17	Dip the terminal in a flux and then dip into a soldering bath at 2455 for 30.5 sec.	>95% coverage
Resist to soldering heat	JIS C 5201 4.18 / IEC 60115-1-4.18	Dip the terminal in a flux and then dip into a soldering bath at 2605 for 10 0.5 sec. Measure the variation of resistance.	(1.00%0.05)
Insulation resistance	JIS C 5201 4.6 / IEC60115-1-4.6	Applied the dielectric withstanding voltage on the center of body for 605 seconds. Then measure insulation resistance.	>10G
Dielectric withstanding voltage	JIS C 5201 4.7 / IEC60115-1-4.7	Applied the dielectric withstanding voltage on the center of body for 605 seconds.	No evidence of flashover, arcing or insulation breakdown
Terminal bending	JIS C 5201 4.33 / IEC60115-1-4.33	Specimen shall be mounted on test board, then bend the board and maintained for 201s. Bending distance: 5+0.2/0 mm (size 1206) or 2+0.2/0 mm (size > 1206). Measure the variation of resistance.	(1.00%0.05)
Rapid temperature changes	JIS C 5201 4.19 / IEC60115-1-4.19	Put specimen in a chamber: T1: -553; T2: 1553 / 1253, 30 min per cycle, repeated 300 cycles. Measure the variation of resistance.	0.5%, 1%: (1.0%+0.05) 5%: (2.0%+0.05)
Humidity	JIS C 5201 4.24 / IEC60115-1-4.24	Constant temperature and humidity chamber: 402, 90~95 %RH; apply rated voltage for 1.5 hours, then power off for 0.5 hours; repeat for 1000 +48/-0 hours. Measure the variation of resistance.	As SPEC