Aluminum Electrolytic Capacitor Guangdong TOPAZ Elec Tech ECSS0605101M016P00 with Frequency Response

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This document outlines the guidelines for using Aluminum Electrolytic Capacitors to ensure optimal performance and extended lifespan. It covers critical aspects such as polarity, voltage ratings, ripple current, operating temperature, frequency, storage, and handling during soldering and cleaning.

Product Attributes

Brand: TOPAZCON
Origin: GuangDong, China
Part Name: E-CAP
Series: SS Series

Technical Specifications

Specification	Description
Polarity	DC electrolytic capacitors are polarized. Ensure correct polarity to prevent short circuits or damage. Use bipolar capacitors when polarity is uncertain. DC electrolytic capacitors are not suitable for AC applications. Bipolar capacitors are for pulsating or polarity-reversing circuits, not pure AC or high ripple current.
Voltage	Do not exceed the rated voltage. Recommended working voltage is 70-80% of rated voltage for extended life.
Ripple Current	Do not allow ripple current to exceed the permissible value. Excessive ripple current causes heating, capacitance reduction, and damage. Generally, ripple current should not exceed 80% of the rated value.
Frequency	Capacitance is typically measured at 100Hz or 120Hz. Capacitance decreases and tg increases with higher frequencies, leading to increased ambient temperature.
Temperature & Life	Capacitor characteristics vary with temperature. Lower operating temperatures ensure longer life. A 10 reduction in temperature can double the capacitor's life. Formula for life calculation provided.
Storage	Capacitors stored for extended periods may experience increased leakage current and reduced withstand voltage. Before use, apply rated DC voltage gradually.
Handling & Installation	Capacitor case is not insulated from the cathode terminal; insulation measures are required if case insulation is necessary. Avoid excessive force on terminals/leads. Maintain a 2mm safety spacing when bending leads.
Soldering & Cleaning	Use caution with temperature and duration during soldering (within 260, not exceeding 10 seconds). Do not use halogenated solvents for cleaning; recommended solvents include methanol, isopropanol, ethanol, etc.
Circuit Board Layout	Ensure hole spacing on circuit boards matches lead spacing to avoid stress on leads. Consider hole layout carefully to prevent solder splashing onto the capacitor body.