Long term miniature aluminum electrolytic capacitors Guangdong TOPAZ Elec Tech ERE1H2R2M051100B series

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This specification covers "ALL series" miniature single-ended aluminum electrolytic capacitors designed for reliable long-term operation within a specified ambient temperature range. These capacitors adhere to RoHS, REACH, and HF standards.

Product Attributes

Brand: TOPAZCON
Origin: Guangdong, China
Material: Aluminum Electrolytic
Certifications: RoHS, REACH, HF

Technical Specifications

Category	Series	Voltage (WV)	Capacitance (Cap)	Tolerance	Size (Dia. x Length)	Terminal	Colour Code	Other
E (Electrolytic Capacitor)	RE	1 to 600	0.1 to 68000	5% to 20%	3x5 to 18x40	Bulk packing (O0), Taping (T1, T2, T3, T4), Lead Cut (RT), RF, RG, RJ, RR, LF, LJ, LR, LG, RS, RN, RV, LH, TE, TF, TG, LP, LT, LS, LV	Black (B), Yellow (Y), Ink Green (I), Light Green (L), Orange (O), White (W), Purple (P)	Special codes for customer requirements
P (Conductive Polymer)
S (super-capacitor)

Tests

Item	Test Conditions	Performance Requirements
Surge Voltage	At 15~35, applying Surge Voltage 1000 cycles of 30s on and 330s off.	No visible damage, C/C 10 %, tg initial specified value, I initial specified value
Load Life	At rated temperature, applying rated voltage (DC value + peak ripple voltage nominal voltage) for specified times, then resumed 16 hours after.	C/C within 20 % of initial value, tg 200% initial specified value, I initial specified value
Shelf Life	1000 hours at +105. After test: UR to be applied for 30min > 24h before measurement.	C/C within 20 % of initial value, tg 200% initial specified value, I 200% initial specified value
Solderability	Tank temperature: 2355; Impregnating depth: 90% of the total dipped portion of termination; Impregnating depth: 2s.	The lead wire is coated by tin and wet. At least 90% of Circumferential surface of the lead wire covered with new solder.
Resistance to soldering heat	Tank temperature: 2605; Impregnating depth: 6mm; Impregnating time: 10s.	No visible damage, C/C 10 %, tg initial specified value, I initial specified value
Stable Humidity	21 days at 40, RH 90 to 95%, no voltage applied.	No visible damage; no leakage of electrolyte; marking legible, C/C 5 %, tg initial specified value, I initial specified value
Resistance to vibration	Frequency: From 10 to 55 Hz and return to 10 Hz, shall be transferred in 1 Min. Total Amplitude: 1.5 mm. Direction and duration of vibration: 3 orthogonal directions mutually each for 2 hours. Total 6 hours.	No visible damage; no leakage of electrolyte; marking legible, C/C 5 %, tg initial specified value, I initial specified value
Characteristic at High and low temperature	Step 1: Measured impedance. Step 2: After storage for 2 hours, measure at thermal stability. Step 4: After storage for 2 hours, measure Leakage Current at thermal stability.	Step 2 Impedance ratio (to Step 1) 5. Step 4 Leakage Current 10 times specified value.
Resisting Solvent	Solvent: Isopropylalcohol. Temperature: 20-25. Time: 305s.	Appearance: No remarkable abnormality.
Terminal Strength	Tensile strength: Applied static load to terminal in axial direction for 101 sec. Bending strength: Hang specified dead weight, bend body 90, return, bend 90 opposite, return. Complete in 5 sec.	When capacitance is measured, no contact, open or short circuit. No mechanical or terminal damage.
Reversed polarity D.C. test	D.C. rated voltage shall be applied to the capacitor.
Pressure relief	The pressure relief device shall open in such a way as to avoid any danger of fire or explosion of Capacitor elements. Applies to capacitors with diameter 6.3mm.	No fire, no explosion or separation of aluminum case and sealing material.