Frequency 75.000MHz Crystal Oscillator SMD 7.0x5.0 Package Stability 30ppm HD 8P075000301 Components

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This specification applies to the RoHS crystal oscillator with a frequency of 75.000MHz, designed for use in electronic equipment. It features a SMD 7.0x5.0 package and offers a nominal frequency of 75.000MHz with a frequency stability of 30ppm.

Product Attributes

Brand: JIANGSU HD-CRYSTAL TECHNOLOGY CO.,LTD
Origin: China (Jiangyin, Jiangsu Province)
Certifications: RoHS

Technical Specifications

Item	Specification
Nominal Frequency	75.000MHz (incl. 25C tolerance, tolerance over operating temperature range, input voltage change, load change, 1 year aging)
Frequency Stability	30ppm
Aging	3ppm/year Max
Operating Temperature Range	-40 to +85C
Storage Temperature Range	-55 to +125C
Input Voltage (VDD)	+3.3Vdc10%
Input Current (IDD)	36mA max
Output Waveform	CMOS
Output Symmetry	45%~ 55%
Rise/Fall Time	5ns max
Output Voltage VOL: VOH	10%VDD : 90%VDD
Output Load	15pF
Output State Control	Enable/disable
Start-up Time	55ms max
Standby current	10A max
Phase Jitter (rms)	1ps rms max (12kHz to 20MHz)
Oscillation mode	Fundamental
Package	SMD 7.05.0
Product Series	QMEMS7050 / 8P series
Part Number	8P075000301
Revision	A/1
Date of Issue	2020/1/1

Reliability Specification

Item	Test Method	Specification
Low Temperature Storage	GB/T 2423.1-2001, Method Aa	Spending 72 hrs at -55C3C constant temperature. Measurement taken after DUT being left at room temperature for 242 hours. Frequency change after test 5ppm.
High Temperature Storage	GB/T 2423.2-2001, Method Ba	Spending 72 hrs at 125C3C constant temperature. Measurement taken after DUT being left at room temperature for 242 hours. Frequency change after test 5ppm.
Humidity	GB/T 2423.3- 2006, Method Cab	Spending 96 hrs at 40 C 3 C, with 90 3% R.H. Measurement taken after DUT being left at room temperature for 242 hours. Frequency change after test 5ppm.
Temperature Cycle	GB/T 2423.22-2002, Method Nb	10 cycles from -55C to 125C. Measurement taken after DUT being left at room temperature for 242 hours. Frequency change after test 5ppm.
Vibration	GB/T 2423.10- 1995, Method Fc	Apply 0.75mm vibration at sweep frequency 10500 Hz, for 2h. 10 cycles in each direction of 3 axis. Measurement taken after 1 hour. Frequency change after test 5ppm. No visible damages.
Shock	GB/T 2423.5-1995, Method Ea	Peak 1000m/s2, normal width 6ms half sine wave form, 3.7m/s, 3 perpendicular axis of samples, 3 cycles / direction, total 18 cycles. Measurement taken after 1 hour. Frequency change after test 5ppm. No visible damages.
Solderability	GB/T 2423.28-2005, Method Tc	In 245 5 solder bath for 2 0.5 seconds. Terminals shall be covered more then 95% with solder. There is no need to do functioned test.
Resistance to Soldering Heat	GB/T 2423.28-2005, Test Tb Method 1B	Passed through the re-flow oven under the following condition. Preheat to 150C5C for 60 to 120sec,and peak 265C5C for 10s3sec.Measurement taken after DUT being left at room temperature for at 242 hours. Frequency change after test 5ppm.
Terminal Strength	JIS-C- 6429 Method 1 & 2	Mount on a glass-epoxy board (100x50x1.6mm), then bend to 2mm displacement (velocity 1mm/sec) and keep for 5 seconds. or pulling force 0.5 kg for at least 60 seconds. No visible damage.
Drop	GB/T 2423.8-1995, Method Ed	Free drop to the wooden plate from 1.0 m heights for 3 times. Measurement taken after 1 hour. Frequency change after test 5ppm. No visible damages.