3mm Chip Trimmer Potentiometer Metal Glaze Resistor HDK VGF39NCHXT B304 for Electronic Equipment
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
HOKURIKU ELECTRIC INDUSTRY CO., LTD. - VGF39NCHXT HDK Type Variable Resistor
Product Overview
The HOKURIKU ELECTRIC INDUSTRY CO., LTD. VGF39NCHXT is a 3mm chip trimmer potentiometer featuring a Metal-Glaze-Resistor. Designed for general electronic equipment, this variable resistor offers a nominal total resistance range from 100 to 1 M with a tolerance of 25%. It operates within a wide temperature range of -40 to +100 and is suitable for applications requiring precise resistance adjustment.
Product Attributes
- Brand: HOKURIKU ELECTRIC INDUSTRY CO., LTD.
- Type: HDK VGF39NCHXT
- Resistor Type: Metal-Glaze-Resistor
- Origin: CHINA (Manufactured by DANDONG NEW LAND ELECTRONIC Co., Ltd.)
- Certifications: RoHS Compliant
Technical Specifications
| Specification | Value | Details |
|---|---|---|
| Model Number | VGF39NCHXT | |
| Type | 3mm Chip Trimmer Potentiometer | With Metal-Glaze-Resistor |
| Application | General Electronic Equipment | |
| Operating Temperature Range | -40 to +100 | |
| Storage Temperature Range | -40 to +100 | |
| Nominal Total Resistance Range | 100 to 1 M | Refer to Application List for series 1, 2, 3, 5, E |
| Total Resistance Tolerance | 25 % | |
| Rated Power | 0.15 W (@ +70 ) | Power derating curve vs. ambient temperature applies |
| Rated Voltage | E=PR | When rated voltage exceeds max. operating voltage, max. operating voltage is applied. |
| Maximum Operating Voltage | 50 V | |
| Mechanical Rotation | 270 20 | |
| Rotational Torque | 0.98 mNm to 11.76 mNm | |
| Push Load | 9.8 N | Applied axially for 30 seconds |
| Torsion Moment | 14.7 mNm | Applied to spindle for 5 seconds |
| End Stop Strength | 14.7 mNm | Applied to spindle for 5 seconds |
| Soldering Strength | 9.8 N (Lateral), 4.9 N (Upward) | Applied for 30 seconds after soldering |
| Contact Resistance (Total resistance 1 k) | 5 % of nominal total resistance | |
| Contact Resistance (Total resistance > 1 k) | 2 % of nominal total resistance | |
| Residual Resistance (1-2 or 2-3) | 20 | For total resistance 1 k |
| Residual Resistance (1-2 or 2-3) | 2 % of nominal total resistance | For total resistance > 1 k |
| Ineffective Rotation | 10 % of total mechanical rotation | At each end |
| Temperature Coefficient of Resistance (T.C.R.) | 250 ppm/ | Measured at specific temperatures |
| Load Life | 1000 h 12 h at 70 2 | Change in total resistance 5 % |
| Vibration Resistance | 1.5 mm amplitude, 10 Hz - 55 Hz - 10 Hz cycle for 2h per axis (X, Y, Z) | Change in resistance between 1-2 5 %; No distinct looseness or poor contact |
| Resistance to Soldering Heat | Peak Temp. 260 (10s), Application Time 230 (40s) | Change in resistance between 1-2 5 %; No instant open |
| High Temperature Storage | 1000 h 12 h at 70 2 | Change in total resistance 2 %; No distinct looseness or poor contact |
| Humidity Load Life | 1000 h 12 h at 40 2 , 90-95% RH | Change in total resistance 5 % |
| Humidity Resistance | 1000 h 12 h at 40 2 , 90-95% RH | Change in total resistance 5 %; No distinct looseness or poor contact |
| Temperature Cycle Durability | 5 successive cycles as specified | Change in total resistance 2 %; No distinct looseness or poor contact |
| Rotational Life | 20 cycles 2 cycles at 10 min (90% of total rotation) | Change in total resistance 10 % |
| Preset Position (Delivery) | 50% 15% of total rotation angle | |
| Taping Quantity | 2,500 pcs/reel (excluding fractions) |
Materials
| Part Name | Base Material | Plating | Remarks |
|---|---|---|---|
| Board | CERAMIC (Al2O3) | ||
| Resistor | METAL GLAZE COATING | ||
| Electrode | AgPd | ||
| 1st, 3rd Terminal | STEEL | Under Plating: Ni (0.5-2 m), Surface Plating: Sn (2-4 m) | |
| 2nd Terminal | STEEL | Under Plating: Ni (0.5-2 m), Surface Plating: Sn (2-4 m) | |
| Moving Contact | STAINLESS STEEL | ||
| Sealing Resin | ACRYLIC | SOLDER (Sn-3Ag-0.5Cu) Lead-free solder |
Application Notes
- Recommended for reflow soldering; flow soldering is not supported.
- Avoid excessive force when adjusting resistance; use a driver perpendicular to the operating shaft.
- Handle with care to prevent flux and solder scattering on the resistor surface and sliding contact.
- The product is not washable.
- Do not use adhesives for fixing the slider, as it may cause contact instability.
- Excessive soldering time or temperature can impair product function.
- For reflow soldering, cream solder thickness should be 100-150m. Ensure appropriate solder amount to avoid insufficient bonding or solder bridges.
- If wiring patterns are located directly beneath the product after mounting, ensure insulation measures (e.g., using resist).
- Refer to EIAJ RCR-2191A for potentiometer usage guidelines.
- For applications requiring high reliability and safety, implement fail-safe designs (e.g., protective circuits, redundant circuits).
Product Storage Conditions
- Recommended storage: Normal temperature (5 to 35 ), Normal humidity (45% to 85% RH).
- Storage period: 6 months from delivery.
- Store in original packaging, avoiding stress on the product. Handle opened items with moisture and gas protection.
- Avoid storage under direct sunlight or in corrosive gas atmospheres.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina