Stable Quartz Crystal Frequency Control Unit HELE X3S026000BC1H-NR 26 Megahertz Oscillator Component

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

The HSX321S Quartz Crystal from HARMONY ELECTRONICS CORP. is a high-precision frequency control component designed for various electronic applications. It offers a stable oscillation at 26.000MHz with tight frequency tolerances and a wide operating temperature range. This crystal unit is suitable for applications requiring reliable and accurate timing.

Product Attributes

Brand: HARMONY ELECTRONICS CORP.
Model: HSX321S
Type: Quartz Crystal Unit
Country of Origin: TAIWAN
Manufacturing Locations: THAILAND, CHINA
Moisture Sensitivity Level: Level 1

Technical Specifications

Specification	Value	Notes
Frequency	26.000000MHz
Holder Type	HSX321S
Frequency Tolerance	+/-10 ppm	at 25C +/-3C
Equivalent Resistance	80 ohms Max.	SERIES
Storage Temperature Range	-40C to +85C
Operable Temperature Range	-20C to +75C
Temperature Drift	+/-10 ppm	-20C to +75C
Loading Capacitance (CL)	12.0 pF
Drive Level	10 W	100W Max.
Shunt Capacitance	2.0 pF Max.
Insulation Resistance	More than 500M ohms	at DC 100V
Mode of Oscillation	Fundamental
Circuit Measurement	HP/E5100A, S&A 250B
Shock Resistance	Frequency	Dropping from 120 cm height, 3 times on Concrete floor
Aging	Less than +/-3 ppm/Year
Holder Type	HSX321S	Seam type
Marking	Laser marking	Logo, Nominal Frequency, Manufactured year & month, Lot No.
Base Material	Alumina Ceramic (Al2O3)
Lid Material	Fe-Ni-Co
Crystal Blank	Rectangular At-Cut Quartz Crystal Blank
Carrier Tape Material	PS (Conductive)
Top Tape Material	Polyester
Standard Packing Quantity	3,000 PCS / REEL
Storage Condition	Max. +40C, Max. 80% RH
Cover Tape Release Strength	0.1N to 0.7N	Pulling direction 165 to 180, Speed 300mm/min
Mechanical Performance (Drop Test)	Frequency variation	120 cm height, 3 times on Concrete floor
Mechanical Performance (Vibration Test)		10-55Hz, Sine Wave, 0.8mm amplitude, 120min. each axis
Mechanical Performance (Sealing Tightness)	Leak Rate 1.0x10 Pam/sec. Max.	Measured by Helium leak detector (Fine Leakage)
Mechanical Performance (Solderability)		Dipped in solder bath at 245C+/-5C for 3+/-0.5 sec. after applying ROSIN Flux
Mechanical Performance (Substrate Bending)		Bent to 3 mm, hold for 5 1 sec.
Mechanical Performance (Adhesion)	Pressure: 5N for 10+/-1 sec.
Mechanical Performance (Body Strength)	Pressure: 10N for 10+/-1 sec.
Environmental Performance (Humidity)	Frequency variation	60C +/-2C, 90~95% RH, 240 hours
Environmental Performance (Low Temperature Storage)		-40C +/-2C, 240 hours
Environmental Performance (High Temperature Storage)		+85C +/-2C, 240 hours
Environmental Performance (Temperature Cycles)		-40C to +85C (30min each), 25 cycles