Frequency Stable Crystal Oscillator HELE SSW008000I3CHE-T 8 MHz Pb Free RoHS Compliant Electronic Part
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
The Harmony Electronics HSO321S is a Crystal Oscillator designed for reliable performance. It operates at a nominal frequency of 8.000000MHz and is Pb-free, RoHS 2.0, HF-Halogen free, and REACH Compliant. This product is suitable for various electronic applications requiring stable frequency output.
Product Attributes
- Brand: HARMONY ELECTRONICS CORPORATION
- Product Type: Crystal Oscillator
- Model: HSO321S
- Part Number (H.ELE. P/N): SSW008000I3CHE-T
- Sample O/N: EOS-J70469-1
- Release Date: 2019/08/01
- MSL Level: 1
- Product Standards: Pb free, RoHS 2.0, HF-Halogen free, REACH Compliant
- Country of Origin: Kaohsiung, Taiwan; Shenzhen, China; Dongguan, China; Ratchaburi, Thailand
Technical Specifications
| Item | Symbol | Electrical Spec. | Unit | Condition |
|---|---|---|---|---|
| Electrical Specifications | FL | 8.000000 | MHz | Output Frequency |
| f/F | -50 to +50 | ppm | Frequency Stability @3.30.3V/-40~85 | |
| Topr | -40 to +85 | Operating temp. range | ||
| Vdd | 3.0 to 3.6 | V | Supply voltage | |
| CL | 15 | pF | Output load (C-MOS) | |
| Idd1 | - to 10 | mA | Current consumption 1 (#1 pin: open or "H") @3.3V/ 253 | |
| Idd2 | - to 0.01 | mA | Current consumption 2 (#1 pin: "L" level) | |
| Vol | - to 0.1xVdd | V | Low level output voltage | |
| Voh | 0.9xVdd to - | V | High level output voltage | |
| Duty | 40 to 60 | % | Symmetry | |
| Tr & Tf | - to 7 | ns | Rise & Fall time | |
| Iil | - to 10 | uA | Low level input current | |
| Iih | - to 10 | uA | High Level input current | |
| Vil | - to Vddx0.3 | V | Low level input voltage | |
| Vih | Vddx0.7 to - | V | High level input voltage | |
| Tplz | - to 150 | nsec | Output disable time | |
| Tpzl | - to 10 | msec | Output enable time | |
| Aging | -3 to 3 | ppm/year | Aging | |
| Start-up time | - to 10 | ms | Start-up time | |
| Jitter, Phase RMS(1-) | - to 1 | ps | 12KHz~20MHz Frequency Band | |
| Absolute Maximum Ratings | Vdd | -0.5 ~ 4.0 | V | Vdd terminal voltage |
| Vcont | -0.5 ~ Vdd+0.5 | V | Input terminal voltage | |
| Vout | -0.5 ~ Vdd+0.5 | V | Output terminal voltage | |
| Iout | 15 | mA | Output terminal current | |
| Tstr | -55 ~ 125 | deg.C | Storage temp. range | |
| Mechanical Performance | Shock | Refer to: JIS C 60068-2-32 | A | Dropping from 50 cm height 3 times on 30mm Concrete Floor. |
| Vibration | Refer to: JIS C 60068-2-6/MIL-HDBK-781A 6.5.2 | A | Frequency 10-55Hz, Sine Wave full amplitude of 0.8mm to X, Y and Z 3 axes, Duration of 2 hours to each axis. | |
| Leakage Test | Refer to: JIS C 60068-2-17 | A | Leak Rate 1.0x10-9 Pa-m3/sec. Max. Measured by Helium leak detector. | |
| Solder ability | Refer to: JIS C 60068-2-20/C 60068-2-58 | B | After applying ROSIN Flux, dipping in solder bath at 245deg.C +/- 5deg.C for 3+/-0.5 sec. | |
| Environmental Performance | Resistance of Soldering Heat | Refer to: JIS C 60068-2-58 | A | Performing as the following reflow. |
| Humidity | Refer to: JIS C 60068-2-3 | A | Temperature 60+/-2, RH 90~95%, Duration of 240 hours. Back to the room temperature first, then check the component after 1~2 hours. | |
| Storage in Low Temperature | Refer to: JIS C 60068-2-1 | A | -40deg.C +/-2deg.C, Duration of 240 hours. Back to the room temperature first, then check the component after 1~2 hours. | |
| Storage in High Temperature | Refer to: JIS C 60068-2-2 | A | +85deg.C +/-2deg.C, Duration of 240 hours. Back to the room temperature first, then check the component after 1~2 hours. | |
| Thermal shock | Refer to: JIS C 0025 | A | -40deg.C +/-2deg.C (30min) +85deg.C +/-2deg.C (30min) 25 cycles. And Temperature Increasing/reducing time3mins. Back to the room temperature first, then check the component after 1~2 hours. | |
| Dimensions | 3.20.2 x 2.50.2 | mm | ||
| Pin Connections | 1: Vdd, 2: GND, 3: OE(Output Enable), 4: Output | |||
| Marking | Laser marking | Date Code: Year (0-9), Month (A-M) | ||
| Inside Structure Components | Base-Ceramic, Lid, Kovar, Crystal Blank, Electrode, Connective Adhesive, Bonding Wire, IC, Pad | Material: Ceramic Al2O3, Fe-Ni-Co, Metal SiO2, Silver Powder Ag, Au, Si, Ni-Plating, Au-Plating | ||
| Reflow Condition | Preheat: 160~180deg.C (120 sec), Primary heat: >=220 deg.C (10020 sec), Peak: 2605 deg.C (10 sec Max.) | Soldering within 2 times recommended. | ||
| Manual Solder iron | Bit temp.: 350 max., Time: 3sec max. | Each terminal only should be soldered once. | ||
| Storage Conditions | Environmental Temperature: +40 degrees Celsius Maximum, Relative Humidity: 80% Maximum | Keep in clean dust-free environment out of direct sunlight. | ||
| Carrier Tape Material | Carrier tape: PS, Conductive Top tape: PET | |||
| Standard Packing Quantity | 3,000PCS / REEL | |||
| Release strength of cover tape | 0.1N to 0.7N | N | Pulling direction: 165 to 180, Speed: 300mm/min. |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina