Quartz Crystal Oscillator 32 MHz Frequency Control HELE X2B032000C81H-HU Pb Free RoHS Compliant Unit

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

The Harmony Electronics HSX221SA is a Quartz Crystal unit designed for electronic applications requiring precise frequency control. It features a nominal frequency of 32.000000MHz and operates as a fundamental mode oscillator. This product is Pb-free, RoHS compliant, HF-Halogen free, and REACH compliant, making it suitable for environmentally conscious manufacturing. The HSX221SA is manufactured by Harmony Electronics Corporation, with its origin in Taiwan.

Product Attributes

Brand: Harmony Electronics
Model: HSX221SA
Product Type: Quartz Crystal
Country of Origin: Taiwan
Certifications: Pb free, RoHS Compliant, HF-Halogen free, REACH Compliant
MSL Level: 01

Technical Specifications

Specification	Value	Unit	Notes
Nominal Frequency	32.000000	MHz
Mode of Oscillation	Fundamental
Frequency Tolerance	-15 to +15	ppm	at 253
Equivalent Resistance (RR)	50		SERIES
Storage Temperature Range	-40 to +85
Operable Temperature Range	-20 to +75
Temperature Stability	-15 to +15	ppm	-20 ~ +75
Loading Capacitance (CL)	8.0	pF
Drive Level (DL)	10 to 100	W
Shunt Capacitance (C0)	2.0	pF
Insulation Resistance	500	M	at DC 100V
Aging	-3 to +3	ppm/Year
Dimensions (L x W x H)	2.5 x 2.0 x 0.73	mm	Tolerance: 0.15 (for 2.5x2.0), 0.1 (for 0.73)
Carrier Tape Width	8.0	mm	0.2
Reel Quantity	3000	PCS / REEL	Standard Packing Quantity

Inside Structure Components:

Component	Material	Note
Base	Al2O3
Lid	Fe-Ni-Co
Kovar	Fe-Ni-Co
Crystal Blank	SiO2	Rectangular At-Cut
Electrode	W, Ni, Au
PAD	W, Ni, Au
Connective Adhesive	Ag

Mechanical Performance:

Item	Test Method	Specifications
Shock	JIS C 60068-2-6 A	Dropping from 120 cm height 3 times on 30mmm Concrete Floor
Vibration	MIL-HDBK-781A 6.5.2/ JIS C 60068-2-6 A	Frequency 10-55Hz, Sine Wave full amplitude of 0.8mm to X, Y and Z 3 axes, 2 cycles and duration of 120 mins to each direction.
Leakage Test	---	Leak Rate 1.0x10-9 Pa-m3/sec. Max. Measured by Helium leak detector.
Solder ability	JIS C 60068-2-20 B	After applying ROSIN Flux, dipping in solder bath at 245deg.C 5deg.C for 3 0.5 sec.
Bending Strength	EIAJ ET-7403 A	Mount a sample on board. Apply Pressure to the center of board until it is bent to 3 mm and hold for 5 1 sec. Pressure speed: 0.5 mm/sec.
Adhesion	EIAJ ET-7403 A	Mount a sample on the circuit board. Apply pressure vertically to the side of specimen attached to the circuit board with the pressure jig. Pressure: 5N for 101 sec.
Body strength	EIAJ ET-7403 A	Apply pressure to the center of body with the R0.5 pressure jig. pressure :5N for 101sec

Environmental Performance:

Item	Test Method	Specifications
Resistance of Soldering Heat	A	Performing as the following reflow:
Humidity	JIS C 60068-2-3 A	Temperature 60 2, RH 90~95%, Duration of 240 hours. Back to room temperature first, then in 1~2 hours, the component shall be checked.
Storage in Low Temperature	JIS C 60068-2-1 A	-40deg.C 2deg.C, Duration of 240 hours. Back to the room temperature first, then in 1~2 hours, the component shall be checked.
Storage in High Temperature	JIS C 60068-2-2 A	+85deg.C 2deg.C, Duration of 240 hours. Back to the room temperature first, then in 1~2 hours, the component shall be checked.
Temperature cycles	JIS C 0025 A	-40deg.C 2deg.C (30min) +85deg.C 2deg.C (30min) 25 cycles. And Temperature Increasing/reducing time3mins. Back to the room temperature first, then in 1~2 hours, the component shall be checked.