Precision 26 MHz Quartz Crystal HELE X2B026000L91H-S Pb Free RoHS Compliant for Electronic Circuits
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
The Harmony Electronics HSX221SA is a high-quality Quartz Crystal designed for reliable electronic applications. It features a nominal frequency of 26.000000MHz and is manufactured with Pb-free, RoHS Compliant, and HF-Halogen free materials. This crystal is suitable for various industrial applications requiring precise frequency control and offers excellent stability across a wide operating temperature range.
Product Attributes
- Brand: HARMONY ELECTRONICS CORPORATION
- Product Type: Quartz Crystal
- Model: HSX221SA
- Harmony P/N: X2B026000L91H-S
- Sample O/N: EOS-HC0286-2
- Country of Origin: Taiwan
- Certifications: Pb free, RoHS Compliant, HF-Halogen free, REACH Compliant
- MSL Level: 01
- Green Product: Yes
Technical Specifications
| Item | Electrical Spec. | Unit | Notes | Min | Type | Max |
|---|---|---|---|---|---|---|
| Frequency (FL) | MHz | 26.000000 | ||||
| Mode of oscillation | Fundamental | |||||
| Frequency tolerance | ppm | at 253 | -8 | +8 | ||
| Equivalent resistance (RR) | SERIES | 80 | ||||
| Storage temperature range | -40 | +85 | ||||
| Operable temperature range | -20 | +75 | ||||
| Temperature stability | ppm | -20 ~ +75 | -12 | +12 | ||
| Loading capacitance (CL) | pF | 9.0 | ||||
| Drive level (DL) | W | 10 | 100 | |||
| Shunt Capacitance (C0) | pF | 2.0 | ||||
| Insulation resistance | M | at DC 100V | 500 | |||
| Aging | ppm/Year | -3 | +3 | |||
| Circuit Measured in | HP/E5100A,S&A 250B | |||||
| Dimensions | ||||||
| Length | mm | 2.50.15 | ||||
| Width | mm | 2.00.15 | ||||
| Height | mm | 0.73 Max | ||||
| Inside Structure Components | Material | Note | ||||
| Base | Ceramic Al2O3 | (1) | ||||
| Lid | Metal Fe- Ni Co Ni Plating | (2) | ||||
| Kovar | Metal Fe- Ni -Co | (3) | ||||
| Crystal Blank | Quartz SiO2 | Rectangular At-Cut | ||||
| Electrode | Metal | - | ||||
| PAD | Metal W Ni Plating Au Plating | (6) | ||||
| Connective Adhesive | Silver Powder Ag | |||||
| Reflow Conditions | ||||||
| Preheat | deg.C | 160~180 | 120 sec. | |||
| Primary heat | deg.C | 60~120 | >=220 | |||
| Peak | deg.C | Max. | 10 | 260 | ||
| Emboss Carrier Tape Dimensions | ||||||
| Pocket Width | mm | 4.00.1 | ||||
| Pocket Depth | mm | 1.550.05 | ||||
| Pocket Pitch | mm | 4.00.1 | ||||
| Carrier Tape Width | mm | 8.00.2 | ||||
| Reel Package | ||||||
| Reel Diameter | mm | 180 | 180+0/-3 | |||
| Reel Width | mm | 13.20.5 | ||||
| Reel Thickness | mm | 3.00.2 | ||||
| Standard Packing Quantity | PCS / REEL | 3,000 | ||||
| Mechanical Performance Tests | ||||||
| Shock | Dropping from 120 cm height 3 times on 30 mm Concrete floor. | Refer to: JIS C 60068-2-32 | A | |||
| Vibration | Frequency 10-55Hz, Sine Wave full amplitude of 0.8mm to X, Y and Z 3 axes, 2 cycles and duration of 2 hours to each direction. | Refer to: JIS C 60068-2-6 | A | |||
| Leakage Test | Leak Rate | Pa-m3/sec. Max. | Measured by Helium leak detector. | 1.0x10-9 | ||
| Solder ability | After applying ROSIN Flux, dipping in solder bath at 245deg.C 5deg.C for 3 0.5 sec. | Refer to: JIS C 60068-2-20 | B | |||
| Bending Strength | Mount a sample on board. Apply Pressure to the center of board until it is bent to 3 mm and hold for 5 1 sec. Pressure speed: 0.5 mm/sec. | Refer to: EIAJ ET-7403 | A | |||
| Adhesion | Mount a sample on the circuit board. Apply pressure vertically to the side of specimen attached to the circuit board with the pressure jig. Pressure: 5N for 101 sec. | Refer to: EIAJ ET-7403 | C | |||
| Body strength | Apply pressure to the center of body with the R0.5 pressure jig. pressure :10N for 101sec | Refer to: EIAJ ET-7403 | C | |||
| Environmental Performance Tests | ||||||
| Resistance of Soldering Heat | Performing as the following reflow: | A | ||||
| Humidity | Temperature 602, RH 90~95%, duration of 240 hours. Back to room temperature first, then check the component after 1~2 hours. | Refer to: JIS C 60068-2-3 | A | |||
| Storage in Low Temperature | -40deg.C 2deg.C, duration of 240 hours. Back to the room temperature first, then check the component after 1~2 hours. | Refer to: JIS C 60068-2-1 | A | |||
| Storage in High Temperature | +85deg.C 2deg.C, duration of 240 hours. Back to the room temperature first, then check the component after 1~2 hours. | Refer to: JIS C 60068-2-2 | A | |||
| Temperature cycles | -40deg.C 2deg.C (30min) +85deg.C 2deg.C (30min) 25 cycles. And Temperature Increasing/reducing time3mins. Back to the room temperature first, then check the component after 1~2 hours. | Refer to: JIS C 0025 | A | |||
| Specifications Code A (Humidity/Low Temp/High Temp/Temp Cycles) | FREQ. DRIFT: 5 ppm Max, RESISTANCE DRIFT: 15% or 2 | |||||
| Specifications Code B (Solder ability) | More than 90% of lead shall be covered by new solder. | |||||
| Specifications Code C (Bending Strength/Adhesion/Body Strength) | FREQ. DRIFT: 15 ppm Max, RESISTANCE DRIFT: 25% or 10 | |||||
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina