Durable Crystal Oscillator HELE SSI014318I3CH Featuring 14.318180MHz Frequency and REACH Compliance
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
The HSO531S Crystal Oscillator from Harmony Electronics Corporation is a high-performance component designed for various electronic applications. It offers a nominal frequency of 14.318180MHz with excellent frequency stability and a wide operating temperature range. This Pb-free, RoHS Compliant, HF-Halogen free, and REACH Compliant product is manufactured in Taiwan, ensuring quality and adherence to international environmental standards. Its robust design and precise specifications make it suitable for demanding industrial and commercial uses.
Product Attributes
- Brand: Harmony Electronics Corporation
- Model: HSO531S
- Origin: Taiwan
- Certifications: Pb free, RoHS Compliant, HF-Halogen free, REACH Compliant
- Green Product: Yes
Technical Specifications
| Item | Symbol | Electrical Spec. | Unit | Condition |
|---|---|---|---|---|
| Output Frequency | FL | 14.318180 | MHz | |
| Frequency Stability | f/F | -50 to +50 | ppm | @3.30.3V/-10~70 |
| Operating Temperature Range | Topr | -10 to +70 | ||
| Supply Voltage | Vdd | 3.0 to 3.6 | V | |
| Current Consumption 1 (#1 pin: open or "H") | Idd1 | - to 25 | mA | @3.3V/ 253 |
| Current Consumption 2 (#1 pin: "L" level) | Idd2 | - to 0.05 | mA | |
| Low Level Output Voltage | Vol | - to 0.1xVdd | V | |
| High Level Output Voltage | Voh | 0.9xVdd to - | V | |
| Symmetry Duty | 40 to 60 | % | ||
| Rise & Fall Time | Tr & Tf | - to 10 | ns | |
| Low Level Input Current | Iil | - to -100 | uA | |
| High Level Input Current | Iih | - to 100 | uA | |
| Low Level Input Voltage | Vil | - to Vddx0.3 | V | |
| High Level Input Voltage | Vih | Vddx0.7 to - | V | |
| Output Disable Time | Tplz | - to 150 | nsec | |
| Output Enable Time | Tpzl | - to 10 | msec | |
| Aging | -5 to 5 | ppm/year | ||
| Start-up Time | - to 10 | ms | ||
| Jitter, Phase RMS(1-) | - to 1 | ps | 12KHz~20MHz Frequency Band |
| Absolute Maximum Ratings | Symbol | Value | Unit |
|---|---|---|---|
| Vdd terminal voltage | Vdd | -0.5 to 4.0 | V |
| Input terminal voltage | Vcont | -0.5 to Vdd+0.5 | V |
| Output terminal voltage | Vout | -0.5 to Vdd+0.5 | V |
| Output terminal current | Iout | 15 | mA |
| Storage temp. range | Tstr | -55 to 125 | deg.C |
| Dimensions | Value | Unit |
|---|---|---|
| Length | 5.0 0.2 | mm |
| Width | 3.2 0.2 | mm |
| Height | 1.3 max. | mm |
| Pin Connections | Pin # |
|---|---|
| Vdd | #2 |
| Output | #3 |
| GND | #4 |
| OE(Output Enable) | #1 |
| Mechanical Performance | Test Methods | Specifications |
|---|---|---|
| Shock | Dropping from 50 cm height 3 times on 30mm hard wooden board. Refer to: JIS C 60068-2-6 | A |
| Vibration | Frequency 10-55Hz, Sine Wave full amplitude of 0.8mm to X, Y and Z 3 axes, Duration of 2 hours to each axis. Refer to: MIL-HDBK-781A 6.5.2/ JIS C 60068-2-6 | A |
| Leakage Test | Leak Rate Measured by Helium leak detector. | 1.0x10-9 Pa-m3/sec. Max. |
| Solder ability | After applying ROSIN Flux, dipping in solder bath at 245deg.C +/- 5deg.C for 3+/-0.5 sec. Refer to: JIS C 60068-2-20 | B (More than 90% of lead shall be covered by new solder.) |
| Environmental Performance | Test Methods | Specifications |
|---|---|---|
| Resistance of Soldering Heat | Performing as the following reflow: | A (Frequency variation shall be within +/-5ppm and equivalent resistance shall be within +/-15% or 2) |
| Humidity | Temperature 60+/-2, RH 90~95%, Duration of 240 hours. Back to room temperature first, then check the component after 1~2 hours. Refer to: JIS C 60068-2-3 | A |
| Storage in Low Temperature | -40deg.C +/-2deg.C, duration of 240 hours. Back to the room temperature first, then check the component after 1~2 hours. Refer to: JIS C 60068-2-1 | A |
| Storage in High Temperature | +85deg.C +/-2deg.C, duration of 240 hours. Back to the room temperature first, then check the component after 1~2 hours. Refer to: JIS C 60068-2-2 | A |
| Temperature cycles | -30deg.C +/-2deg.C (30min) +85deg.C +/-2deg.C (30min) 25 cycles. And Temperature Increasing/reducing time3mins. Back to the room temperature first, then check the component after 1~2 hours. Refer to: JIS C 0025 | A |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina