Quartz crystal HELE X1H016000FI1H-X 16 MHz fundamental mode frequency with environmental compliance
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
The HSX531S Quartz Crystal from Harmony Electronics Corporation is a high-quality electronic component designed for precise frequency generation. It operates on a fundamental mode of oscillation at a nominal frequency of 16.000000MHz. This crystal is RoHS compliant, Pb-free, HF-Halogen free, and REACH compliant, ensuring it meets environmental and safety standards. It is suitable for various electronic applications requiring stable and accurate timing signals.
Product Attributes
- Brand: Harmony Electronics Corporation
- Product Type: Quartz Crystal
- Model: HSX531S
- Origin: Taiwan
- Certifications: Pb free, RoHS Compliant, HF-Halogen free, REACH Compliant
- MSL Level: 1
- Green Product: Yes
Technical Specifications
| Item | Electrical Spec. | Unit | Notes | Min | Type | Max | ||
|---|---|---|---|---|---|---|---|---|
| Frequency (FL) | 16.000000 | MHz | 16.000000 | |||||
| Mode of oscillation | Fundamental | |||||||
| Frequency tolerance | -30 to +30 ppm at 253 | |||||||
| Equivalent resistance (RR) | 50 | SERIES | ||||||
| Storage temperature range | -40 to +85 | |||||||
| Operable temperature range | -20 to +70 | |||||||
| Temperature stability | -30 to +30 | ppm | -20 ~ +70 | |||||
| Loading capacitance (CL) | 18.0 | pF | ||||||
| Drive level (DL) | 10 to 300 | W | ||||||
| Shunt Capacitance (C0) | 7.0 | pF | ||||||
| Insulation resistance | 500 | M | at DC 100V | |||||
| Aging | -5 to +5 | ppm/Year | ||||||
| Circuit | Measured in HP/E5100A,S&A 250B | |||||||
| Dimensions (L x W x H) | 3.6 | x | 2.5 | x | 1.3 | mm | (Approx.) | |
| Marking | Laser marking | |||||||
| Inside Structure Components | Base | Ceramic (Al2O3) | ||||||
| Lid | Metal (Fe-Ni-Co Ni Plating) | |||||||
| Kovar | Metal (Fe-Ni-Co) | |||||||
| Crystal Blank | Quartz (SiO2) Rectangular At-Cut | |||||||
| Electrode | Metal | |||||||
| PAD Metal | W Ni Plating Au Plating | |||||||
| Connective Adhesive | Silver Powder (Ag) | |||||||
| Reflow Conditions (Preheat) | 160~180 | 120 sec. | ||||||
| Reflow Conditions (Primary heat) | >=220 | 60~120 sec. | ||||||
| Reflow Conditions (Peak) | 260 | 10 sec. Max. | ||||||
| Manual Solder iron (Bit temp.) | Max. 350 | 3sec max. | ||||||
| Carrier Tape Material | PS Conductive | |||||||
| Top Cover Tape Material | Polyester | |||||||
| Release strength of cover tape | 0.1 | N | to 0.7 N | |||||
| Reel Quantity | 1000pcs or 3000pcs | |||||||
| Standard Packing Quantity | 1,000PCS / REEL | |||||||
| Shock Test | Dropping from 120 cm height 3 times on 30 mm Concrete floor. | JIS C 60068232 A | ||||||
| Vibration Test | Frequency 10-55Hz, Sine Wave full amplitude of 0.8mm to X, Y and Z 3 axes, 2 cycles and duration of 2 hours to each direction. | JIS C 6006826 A | ||||||
| Leakage Test | Leak Rate 1.0x10 Pa-m/sec. Max. | Measured by Helium leak detector | ||||||
| Solder ability | Dipping in solder bath at 245 5 for 3 0.5 sec. | JIS C 60068220 B | ||||||
| Bending Strength | Apply Pressure to the center of board until it is bent to 3 mm and hold for 5 1 sec. Pressure speed: 0.5 mm/sec. | EIAJ ET7403 A | ||||||
| Adhesion | Apply pressure vertically to the side of specimen attached to the circuit board with the pressure jig. Pressure: 5N for 101 sec. | EIAJ ET7403 C | ||||||
| Body strength | Apply pressure to the center of body with the R0.5 pressure jig. pressure :10N for 101sec | EIAJ ET7403 C | ||||||
| Humidity Test | Temperature 602, RH 90~95%, duration of 240 hours. | JIS C 6006823 A | ||||||
| Storage in Low Temperature | -40 2, duration of 240 hours. | JIS C 6006821 A | ||||||
| Storage in High Temperature | +85 2, duration of 240 hours. | JIS C 6006822 A | ||||||
| Temperature cycles | -40 2 (30min) +85 2 (30min) 25 cycles. Temperature Increasing/reducing time3mins. | JIS C 0025 A | ||||||
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina