Quartz Crystal Unit HSX221SA Model Operating at 32.000MHz Frequency HELE X2B032000D81H-U Suitable for Electronic
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
The HSX221SA is a high-quality Quartz Crystal Unit manufactured by HARMONY ELECTRONICS CORP. Designed for reliable performance, this crystal unit operates at a nominal frequency of 32.000MHz and is suitable for a variety of product applications. It features a compact HSX221SA holder type and offers precise frequency tolerance, low equivalent resistance, and stable operation across a wide temperature range. The product is manufactured in Taiwan, Thailand, and China, adhering to strict quality standards.
Product Attributes
- Brand: HARMONY ELECTRONICS CORP.
- Product Type: Quartz Crystal Unit
- Model: HSX221SA
- Nominal Frequency: 32.000MHz
- Country of Origin: Taiwan, Thailand, China
- Moisture Sensitivity Level: Level 1
Technical Specifications
| Item | Specification | Details |
|---|---|---|
| Frequency | 32.000000MHz | |
| Holder Type | HSX221SA | Seam type |
| Frequency Tolerance | +/-20 ppm | at 25C +/-3C |
| Equivalent Resistance | 60 ohms Max. | /SERIES |
| Storage Temperature Range | -40C To +85C | |
| Operable Temperature Range | -30C To +85C | |
| Temperature Drift | +/-20ppm | -30C To +85C |
| Loading Capacitance (CL) | 8.0 pF | |
| Drive Level | 10 W | (100W Max.) |
| Shunt Capacitance | 2.0 pF Max. | |
| Insulation Resistance | More than 500M ohms | at DC 100V |
| Mode of Oscillation | Fundamental | |
| Shocking (Frequency Variation) | Less than +/-5 ppm | Dropping from 120 cm height 3 times on Concrete floor |
| Shocking (Resistance Variation) | Less than +/-15 % or 2ohms max. | Dropping from 120 cm height 3 times on Concrete floor |
| Aging | Less than +/- 3 ppm/Year | |
| Dimensions and Marking | Refer to page 4 | |
| Emboss Carrier Tape & Reel | Refer to pages 6 and 7 | |
| Mechanical Drop Test | Frequency variation: +/-5ppm, Resistance variation: +/-15% or 2 max. | Dropping from 120 cm height 3 times on Concrete floor |
| Mechanical Vibration Test | Frequency 10-55Hz, Sine Wave full amplitude of 0.8mm to X, Y and Z 3 axes, Duration of 2 hours to each axis. | Refer to: MIL-HDBK-781A 6.5.2/ JIS C 60068-2-6 A |
| Mechanical Sealing Tightness | Leak Rate 1.0x10-8 Pa-m3/sec. Max. | Measured by Helium leak detector. |
| Mechanical Solder ability | More than 90% of lead shall be covered by new solder. | Dipping in solder bath at 245C+/-5C for 3+/-0.5 sec. |
| Mechanical Substrate Bending | Apply Pressure to the center of board until it is bent to 3 mm and hold for 5 1 sec. Pressure speed: 0.5 mm / sec. | |
| Mechanical Adhesion | Apply pressure vertically to the side of specimen attached to the circuit board with the pressure jig. Pressure: 5N for 101 sec. | |
| Mechanical Body Strength | Apply pressure to the center of body with the R0.5 pressure jig. Pressure: 10N for 101sec. | |
| Environmental Humidity Test | Frequency variation: +/-5ppm, Resistance variation: +/-15% or 2 max. | Temperature 60 +/-2C, RH 90~95%, Duration of 240 hours. |
| Environmental Storage in Low Temperature | Frequency variation: +/-5ppm, Resistance variation: +/-15% or 2 max. | -40C +/-2C, Duration of 240 hours. |
| Environmental Storage in High Temperature | Frequency variation: +/-5ppm, Resistance variation: +/-15% or 2 max. | +85C +/-2C, Duration of 240 hours. |
| Environmental Temperature Cycles | Frequency variation: +/-5ppm, Resistance variation: +/-15% or 2 max. | -40C +/-2C (30min) +85C +/-2C (30min), 25 cycles. |
| Soldering Reflow Condition | Preheat: 160~180C (120sec), Primary heat: 220C (60sec), Peak: 260C (10sec Max.) | Available for Lead Free Soldering. Max 2 times. |
| Soldering Iron Condition | Bit temp.: 350C max., Time: 3sec max. | Each terminal solder a 1 time max. |
| Standard Packing Quantity | 3,000 PCS / REEL | |
| Tape Material | Carrier tape: PS, Top tape: Polyester | |
| Cover Tape Release Strength | 0.1N to 0.7N | Pulling direction 165 to 180, Speed 300mm/min. |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina