Electronic Component Featuring HELE SSR033000I3CH Crystal Oscillator 33 Megahertz Frequency Stability

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

The HSO751S Crystal Oscillator from Harmony Electronics Corporation is a high-performance frequency control component designed for various electronic applications. It offers a nominal frequency of 33.000000MHz with excellent frequency stability and low current consumption. This RoHS compliant and Pb-free product is suitable for automated SMT processes and is manufactured in Taiwan.

Product Attributes

Brand: Harmony Electronics Corporation
Product Type: Crystal Oscillator
Model: HSO751S
Nominal Frequency: 33.000000MHz
Origin: Taiwan
Certifications: Pb free, RoHS Compliant, HF-Halogen free, REACH Compliant
MSL Level: 1
Green Product: Yes

Technical Specifications

Item	Symbol	Electrical Spec.	Unit	Condition
Electrical Specifications	FL	33.000000	MHz
	f/F	-50 ~ +50	ppm	@3.30.3V/10~70
	Topr	-10 ~ +70
	Vdd	3.0 ~ 3.6	V
	CL	15	pF	C-MOS
	Idd1	- ~ 16	mA	@3.3V/ 253 (#1 pin: open or "H")
	Idd2	- ~ 0.02	mA	(#1 pin: "L" level)
	Vol	- ~ 0.1xVdd	V
	Voh	0.9xVdd ~ -	V
	Duty	40 ~ 60	%
	Tr & Tf	- ~ 10	ns
	Iil	- ~ -100	uA
	Iih	- ~ 100	uA
	Vil	- ~ Vddx0.3	V
Vih	Vddx0.7 ~ -	V
Tplz	- ~ 150	nsec
Tpzl	- ~ 10	msec
Aging	-5 ~ 5	ppm/year
Startup time	- ~ 10	ms
Jitter, Phase RMS(1)	- ~ 1	ps	12KHz~20MHz Frequency Band
Absolute Maximum Ratings	Vdd	-0.5 ~ 7.0	V
	Vcont	-0.5 ~ Vdd+0.5	V
	Vout	-0.5 ~ Vdd+0.5	V
	Iout	15	mA
	Tstr	-55 ~ 125	deg.C
Dimensions	7.00.2 x 5.00.2 mm
	Height: Max. 3.7 mm
	Land Pattern Layout: 3.68 x 3.28 mm
Pin Connections	1: OE(Output Enable) 2: Vdd 3: GND 4: Output
Marking	Laser marking with Date Code (Year/Month)
Inside Structure	Base: Ceramic Al2O3 Lid: Fe-Ni-Co Kovar: Fe-Ni-Co Crystal Blank: SiO2 Rectangular At-Cut Electrode: Metal Connective Adhesive: Silver Powder Ag Bonding Wire: Au IC: Silicon Si, Al Pad: W, Ni-Plating, Au-Plating
Reflow Condition	Preheat: 160~180 (120 sec) Primary heat: >=220 (60~120 sec) Peak: 260 (10 sec Max.)
Manual Solder iron	Bit temp.: 350 max., Time: 3sec max.
Storage Conditions	Temperature: +125 Maximum Relative Humidity: 80% Maximum
Carrier Tape Material	Carrier tape: PS Top tape: Polyester
Standard Packing Quantity	1,000 PCS / REEL
Mechanical Performance	Shock	Dropping from 50 cm height 3 times on 30mm hard wooden board.	A	JIS C 60068232
	Vibration	Frequency 1055Hz, Sine Wave full amplitude of 0.8mm to X, Y and Z 3 axes, Duration of 2 hours to each axis.	A	JIS C 6006826
	Leakage Test	Leak Rate 1.0x109 Pam3/sec. Max. Measured by Helium leak detector.
	Solder ability	After applying ROSIN Flux, dipping in solder bath at 245deg.C +/ 5deg.C for 3+/0.5 sec.	B	JIS C 60068220
Environmental Performance	Resistance of Soldering Heat	Performing as the following reflow: A
	Humidity	Temperature 60+/2, RH 90~95%, Duration of 240 hours. Back to the room temperature first, then check the component after 1~2 hours.	A	JIS C 6006823
	Storage in Low Temperature	55deg.C +/2deg.C, Duration of 240 hours. Back to the room temperature first, then check the component after 1~2 hours.	A	JIS C 6006821
	Storage in High Temperature	+125deg.C +/2deg.C, Duration of 240 hours. Back to the room temperature first, then check the component after 1~2 hours.	A	JIS C 6006822
	Temperature cycles	55deg.C+/2deg.C (30min) +125deg.C+/2deg.C (30min) 25 cycles. And Temperature Increasing/reducing time3mins. Back to the room temperature first, then check the component after 1~2 hours.	A	JIS C 0025