Precision 32 MHz Quartz Crystal HELE X1C032000B81H-HU for Stable Electronic Oscillation Applications

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

The HSX111SA Quartz Crystal from HARMONY ELECTRONICS CORP. is a high-quality electronic component designed for various product applications. Manufactured in Taiwan, this crystal unit operates at a nominal frequency of 32.000MHz and offers precise frequency tolerance. It is suitable for use in electronic devices requiring stable oscillation, with specified operating temperature ranges and environmental performance characteristics.

Product Attributes

Brand: HARMONY ELECTRONICS CORP.
Model: HSX111SA
Country of Origin: TAIWAN
Application: Products (CRYSTAL)
Holder Type: HSX111SA
Mode of Oscillation: Fundamental
Base Material: Alumina Ceramic (Al2O3)
Lid Material: Fe-Ni-Co
Cover Ring Material: Fe-Ni-Co Alloy
Tape Material (Carrier): PS Conductive
Tape Material (Top): Polyester

Technical Specifications

Specification	Value	Notes
Nominal Frequency	32.000000MHz
Frequency Tolerance	+/-10ppm	at 25deg.C +/-3deg.C
Equivalent Resistance	100 Ohms Max.	/SERIES
Storage Temperature Range	-40 deg.C To +85 deg.C
Operable Temperature Range	-20 deg.C To +70 deg.C
Temperature Drift	+/-10 ppm	-20 deg.C To +70deg.C
Loading Capacitance (CL)	8.0 pF
Drive Level	10 uW	(100uW Max)
Shunt Capacitance	2.0pF Max
Insulation Resistance	More than 500M ohms	at DC 100V
Shock Test (Dropping)	Frequency variation	Dropping from 50 cm height 3 times on firm wood
Aging	Less than +/- 1 ppm/Year
Standard Packing Quantity	3,000 PCS / REEL
Reel Diameter	180+0/-3 mm
Carrier Tape Inner Width	9.3+/-0.3 mm
Carrier Tape Outer Width	11.3+/-1.0 mm
Cover Tape Release Strength	0.1N to 0.7N	Pulling direction 165 to 180, Speed 300mm/min
Mechanical Performance (Drop)	Pass	Drop the component 3 times from 50cm on hard ground (Code A)
Mechanical Performance (Vibration)	Pass	10-55Hz, Sine Wave full amplitude of 0.8mm to X,Y and Z 3 axes, Duration of 2 hours to each axis (Code A)
Mechanical Performance (Sealing Tightness)	Leak Rate 1.0x10-8 Pa-m3/sec. Max.	Also, no serial bubble is observed by Fluor inert tests.
Mechanical Performance (Solderability)	Pass	More than 90% of lead shall be covered by new solder (Code B)
Environmental Performance (Humidity)	Pass	60+/-2 deg.C, RH 90~95%, Duration of 240 hours (Code A)
Environmental Performance (Storage Low Temp)	Pass	-40+/-2 deg.C, Duration of 240 hours (Code A)
Environmental Performance (Storage High Temp)	Pass	+85+/-2 deg.C, Duration of 240 hours (Code A)
Environmental Performance (Temperature Cycles)	Pass	-40+/-2 deg.C (30min)+85+/-2 deg.C (30min), 5 cycles (Code A)
Soldering (Reflow Condition)	Preheat: 160~180 deg.C (120sec), Primary heat: 220 deg.C (60sec), Peak: 260 deg.C (10sec Max.)	Available for Lead Free Soldering
Soldering (Solder Iron)	Bit temp.:350max., Time:3sec max.	Each terminal solder a 1 time max.