24 MHz Crystal Oscillator HELE SSR024000I5CH with Low Current Consumption and RoHS Compliant Features

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Harmony Electronics HSO751S Crystal Oscillator

Product Overview

The Harmony Electronics HSO751S is a high-performance crystal oscillator designed for applications requiring precise frequency control. It offers a nominal frequency of 24.000000MHz with excellent frequency stability and low current consumption. This RoHS compliant and Pb-free component is suitable for various industrial and electronic applications.

Product Attributes

Brand: Harmony Electronics Corp.
Product Type: Crystal Oscillator
Model: HSO751S
Country of Origin: Taiwan
Certifications: Pb free, RoHS Compliant, HF-Halogen free, REACH Compliant
MSL Level: 1

Technical Specifications

Item	Symbol	Electrical Spec.	Unit	Condition
Electrical Specifications	FL	24.000000	MHz
	f/F	-50 to +50	ppm	@5.00.5V / -10~70
	Topr	-10 to +70
	Vdd	4.5 to 5.5	V
	CL	15	pF	C-MOS
	Idd1	-	16	mA	@5.0V / 253 (Pin #1: open or "H")
	Idd2	-	0.02	mA	(Pin #1: "L" level)
	Vol	-	0.1xVdd	V
	Voh	0.9xVdd	-	V
	Duty	40 to 60	%
	Tr & Tf	-	10	ns
	Aging	-5 to +5	ppm/year
Start-up time	-	10	ms
Jitter, Phase RMS(1-)	-	1	ps	12KHz~20MHz Frequency Band
Absolute Maximum Ratings	Vdd	-0.5 ~ 7.0	V
	Vcont	-0.5 ~ Vdd+0.5	V
	Vout	-0.5 ~ Vdd+0.5	V
	Iout	-	15	mA
	Tstr	-55 ~ 125	deg.C
Dimensions	Length	7.0 0.2	mm
	Width	5.0 0.2	mm
	Height	Max. 3.7	mm
Pin Connections	#1	OE (Output Enable)
	#2	Vdd
	#3	GND
	#4	Output
Mechanical Performance	Shock	Dropping from 50 cm height 3 times on 30mm hard wooden board.		Refer to: JIS C 60068-2-32 A
	Vibration	Frequency 10-55Hz, Sine Wave full amplitude of 0.8mm to X, Y and Z 3 axes, Duration of 2 hours to each axis.		Refer to: JIS C 60068-2-6 A
	Leakage Test	Leak Rate 1.0x10 Pa-m/sec. Max.		Measured by Helium leak detector.
	Solder ability	After applying ROSIN Flux, dipping in solder bath at 245deg.C +/- 5deg.C for 3+/-0.5 sec.		Refer to: JIS C 60068-2-20 B
Environmental Performance	Resistance of Soldering Heat	Performing as the following reflow: A
	Humidity	Temperature 60+/-2, RH 90~95%, Duration of 240 hours. Back to room temperature, then check after 1~2 hours.		Refer to: JIS C 60068-2-3 A
	Storage in Low Temperature	-55deg.C +/-2deg.C, Duration of 240 hours. Back to room temperature, then check after 1~2 hours.		Refer to: JIS C 60068-2-1 A
	Storage in High Temperature	+125deg.C +/-2deg.C, Duration of 240 hours. Back to room temperature, then check after 1~2 hours.		Refer to: JIS C 60068-2-2 A
	Temperature cycles	-55deg.C+/-2deg.C (30min) +125deg.C+/-2deg.C (30min), 25 cycles. Temp. Inc/red time 3mins. Back to room temp., check after 1~2 hours.		Refer to: JIS C 0025 A