Quartz crystal frequency control component HELE X1H025000FK1H 25 megahertz REACH and RoHS compliant

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

The Harmony Electronics HSX531S Quartz Crystal is a high-performance frequency control component designed for various electronic applications. It offers a nominal frequency of 25.000000MHz and is manufactured with a focus on reliability and compliance with environmental standards. This crystal is Pb-free, RoHS compliant, HF-Halogen free, and REACH Compliant, making it suitable for modern electronic manufacturing processes.

Product Attributes

Brand: Harmony Electronics Corporation
Model: HSX531S
Country of Origin: Taiwan
Certifications: Pb free, RoHS Compliant, HF-Halogen free, REACH Compliant
MSL Level: 1

Technical Specifications

Item	Electrical Spec.	Unit	Notes	Min	Type	Max
Frequency (FL)		MHz			25.000000
Mode of oscillation			Fundamental
Frequency tolerance		ppm	at 253	-30		+30
Equivalent resistance (RR)			SERIES		50
Storage temperature range				-40		+85
Operable temperature range				-10		+60
Temperature stability		ppm	-10 ~ +60	-30		+30
Loading capacitance (CL)		pF			20.0
Drive level (DL)		W		10		300
Shunt Capacitance (C0)		pF			7.0
Insulation resistance		M	at DC 100V	500
Aging		ppm/Year		-5		+5
Circuit			Measured in HP/E5100A,S&A 250B
Dimensions (L x W)		mm			3.6 x 1.3
Dimensions (Height)		mm			1.3
Dimensions (Lead Pitch)		mm			1.2
Inside Structure - Base Material			Ceramic Al2O3
Inside Structure - Lid Material			Metal Fe- Ni Co Ni Plating
Inside Structure - Kovar Material			Metal Fe- Ni -Co
Inside Structure - Crystal Blank Material			Quartz SiO2 Rectangular At-Cut
Carrier Tape Width		mm			8.0
Carrier Tape Pitch		mm			4.0
Reel Quantity		pcs			1000 / 3000
Mechanical Performance - Shock	Dropping from 100 cm height 3 times on 30 mm Concrete floor.		Refer to: JIS C 60068-2-32		A
Mechanical Performance - Vibration	Frequency 10-55Hz, Sine Wave full amplitude of 0.8mm to X, Y and Z 3 axes, 2 cycles and duration of 2 hours to each direction.		Refer to: JIS C 60068-2-6/ MIL-HDBK-781A 6.5.2		A
Mechanical Performance - Leakage Test	Leak Rate 1.0x10-9 Pa-m3/sec. Max. Measured by Helium leak detector.		Refer to: JIS C 60068-2-17		---
Mechanical Performance - Solder ability	After applying ROSIN Flux, dipping in solder bath at 245deg.C 5deg.C for 3 0.5 sec.		Refer to: JIS C 60068-2-20/ JIS C 60068-2-58		B
Mechanical Performance - Bending Strength	Mount a sample on board. Apply Pressure to the center of board until it is bent to 3 mm and hold for 5 1 sec. Pressure speed: 0.5 mm/sec.		Refer to: EIAJ ET-7403/ JIS C 60068-2-21		A
Mechanical Performance - Adhesion	Mount a sample on the circuit board. Apply pressure vertically to the side of specimen attached to the circuit board with the pressure jig. Pressure: 5N for 101 sec.		Refer to: EIAJ ET-7403 JIS C 60068-2-21		C
Mechanical Performance - Body strength	Apply pressure to the center of body with the R0.5 pressure jig. pressure :10N for 101sec		Refer to: EIAJ ET-7403 JIS C 60068-2-21		C
Environmental Performance - Resistance of Soldering Heat	Performing as the following reflow:		Refer to: JIS C 60068-2-58		A
Environmental Performance - Humidity	Temperature 602, RH 90~95%, duration of 240 hours. Back to room temperature first, then check the component after 1~2 hours.		Refer to: JIS C 60068-2-3		A
Environmental Performance - Storage in Low Temperature	-40deg.C 2deg.C, duration of 240 hours. Back to the room temperature first, then check the component after 1~2 hours.		Refer to: JIS C 60068-2-1		A
Environmental Performance - Storage in High Temperature	+85deg.C 2deg.C, duration of 240 hours. Back to the room temperature first, then check the component after 1~2 hours.		Refer to: JIS C 60068-2-2		A
Environmental Performance - Thermal shock	-55deg.C 2deg.C (30min) +125deg.C 2deg.C (30min) 25 cycles. And Temperature Increasing/reducing time3mins. Back to the room temperature first, then check the component after 1~2 hours.		Refer to: JIS C 0025		A