Stable frequency oscillator HELE SSR027000I3CH 27 megahertz model for electronic product integration

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

The HSO751S is a high-quality oscillator manufactured by Harmony Electronics Corp. Designed for reliable performance, this oscillator is suitable for a wide range of electronic products. Its key features include a stable output frequency of 27.000MHz, a broad operating temperature range, and robust electrical specifications, making it an ideal component for various industrial and commercial applications.

Product Attributes

Brand: HARMONY ELECTRONICS CORP.
Country of Origin: TAIWAN
Model Series: HSO751S
Customer Part No.: HELE.
Harmony Part No: SSR027000I3CH
Specification Number: SSR027000I3CH Rev. 0
Date: 2015/12/16

Technical Specifications

Item	Symbol	Value	Unit	Condition	Min	Typ	Max	Etc
Type Name		HSO751S
Output Frequency		27.000000	MHz
Absolute Maximum Ratings	Vdd	-0.5 ~ 7.0	V	Vdd terminal voltage
	Vcont	-0.5 ~ Vdd+0.5	V	Input terminal voltage
	Vout	-0.5 ~ Vdd+0.5	V	Output terminal voltage
	Iout		15	mA	Output terminal current
	Tstr	-55 ~ 125		Storage temp. range

Electric Specifications	f/F		ppm	Frequency tolerance	-50		+50	3.3+/- 0.3V -10~70
	Topr			Operating temp. range	-10	25	+70
	Vdd		V	Supply voltage	3.0	3.3	3.6
	Idd1		mA	Current consumption 1 (#1 pin: open or "H")			25	Fig1,2 3.3V 25+/-3
	Idd2		mA	Current consumption 2 (#1 pin: "L" level)			0.02
	Duty		%	Symmetry	40	50	60
	Vol		xVdd	V	Low level output voltage			0.1
	Voh		xVdd	V	High level output voltage	0.9
	Tr & Tf			ns	Rise & Fall time			10	Output load C-MOS CL =15 pF (Idd1, Idd2 test at No Load)
	Iil		A	Low level input current			-100	Fig3 3.3V 25+/-3
	Iih		A	High Level input current			100
Vil		xVdd	V	Low level input voltage			0.3
Vih		xVdd	V	High level input voltage	0.7
Tplz		ns	Output disable time			150
Tpzl		ms	Output enable time			10
Tosc		ms	Start-up Time			10
Aging		ppm/year	Aging	-5		5	Frequency Stability is inclusive of 25 Tolerance, operating temperature range, input voltage change, Load change, first of aging, shock and vibration.
Moisture Sensitivity Level							Level 1
Dimensions	Overall Dimensions			7.00.2 x 5.00.2 mm
	Height Max.			1.4 mm
	Lead Pitch			5.08 mm
	Lead Width			0.55 mm
	Tolerance			0.2 mm
Mechanical Performance	Drop Test				Drop 3 times from the height of 50cm onto min. 30mm thickness hard wooden board.	Refer to: JIS C 60068-2-6 A			A
	Vibration Test				Frequency 10-55Hz, Sine Wave full amplitude of 0.8mm to X, Y and Z 3 axes, Duration of 2 hours to each axis.	Refer to: MIL-HDBK-781A 6.5.2./JIS C60068-2-6 A
	Sealing Tightness	(1) Leak Rate		Pa-m/sec.	Max. Measured by Helium leak detector. Fine Leakage.			1.0x10-8
	Sealing Tightness	(2) Dipping			Dipping in the FC-40 at +125 +/-5deg.C for 5 minutes, no gas bubble observed from the inside of the can.
	Solder ability				After applying ROSIN Flux, dipping in solder bath at 245deg.C+/-5deg.C for 3+/-0.5 sec.	Refer to: JIS C 60068-2-6 B
	Base Material				Alumina Ceramic (Al2O3)
	Metalized Pad				W Ni Plating Au Plating
Environment Performance	Humidity Test				Temperature 60 +/-2 , RH 90~95%, Duration of 240 hours. Back to room temperature first, then in 1~2 hours, the component shall be checked.	Refer to: JIS C 60068-2-3 A			A
	Storage in Low Temperature				-40deg.C +/-2deg.C, Duration of 240 hours. Back to the room temperature first, then in 1~2 hours, the component shall be checked.	Refer to: JIS C 60068-2-1 A			A
	Storage in High Temperature				+85deg.C +/-2deg.C, Duration of 240 hours. Back to the room temperature first, then in 1~2 hours, the component shall be checked.	Refer to: JIS C 60068-2-2 A			A
	Temperature Cycles				-30deg.C +/-2deg.C (30min) +80deg.C +/-2deg.C (30min) 25 cycles. Back to the room temperature first, then in 1~2 hours, the component shall be checked.	Refer to: JIS C 0025 A			A
	High Temperature Operation				+85deg.C +/-5deg.C, +3.3V Vdd Duration of 240 hours. Back to the room temperature first, then in 1~2 hours, the component shall be checked.	Refer to: JIS C 60068-2-2 A			A
Supplement	Reflow Condition				Refer to proposed reflow condition (soldering 2 times max.)
Supplement	Solder Iron Condition				Bit temp.:350 Max. , Time: 3sec Max. , Each terminal solder a 1 time Max.
Taping and Packing	Quantity on Reel				1,000 PCS/REEL
Taping and Packing	Storage Condition				Temperature+40 Max. Humidity 80% Max.