Electronic Circuit Crystal Oscillator HELE SSR016384I3CH Featuring 16.384000MHz Frequency Stability
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
The HSO751S is a crystal oscillator from Harmony Electronics Corporation, designed for reliable electronic applications. It operates at a nominal frequency of 16.384000MHz and offers a fundamental mode of oscillation. This product is Pb-free, RoHS Compliant, HF-Halogen free, and REACH Compliant, indicating a commitment to environmental standards. Its robust design and specified performance characteristics make it suitable for various electronic circuits requiring stable frequency generation.
Product Attributes
- Brand: Harmony Electronics Corporation
- Product Type: Crystal Oscillator
- Model: HSO751S
- Country of Origin: Taiwan
- Certifications: Pb free, RoHS Compliant, HF-Halogen free, REACH Compliant
- MSL Level: 1
Technical Specifications
| Specification | Symbol | Electrical Spec. | Unit | Condition |
|---|---|---|---|---|
| Output Frequency | FL | 16.384000 | MHz | |
| Mode of Oscillation | Fundamental | |||
| Frequency Stability | Δf/F | -50 to +50 | ppm | @3.3±0.3V/-10~70℃ |
| Operating Temperature Range | Topr | -10 to +70 | ℃ | 25℃ |
| Supply Voltage | Vdd | 3.0 to 3.6 | V | |
| Output Load | CL | 30 | pF | C-MOS |
| Current Consumption 1 (#1 pin: open or "H") | Idd1 | - to 25 | mA | @3.3V/ 25±3℃ |
| Current Consumption 2 (#1 pin: "L" level) | Idd2 | - to 0.02 | mA | |
| Low Level Output Voltage | Vol | - to 0.1xVdd | V | |
| High Level Output Voltage | Voh | 0.9xVdd to - | V | |
| Symmetry Duty | 40 to 60 | % | ||
| Rise & Fall Time | Tr & Tf | - to 10 | ns | |
| Low Level Input Current | Iil | - to -100 | uA | |
| High Level Input Current | Iih | - to 100 | uA | |
| Low Level Input Voltage | Vil | - to Vddx0.3 | V | |
| High Level Input Voltage | Vih | Vddx0.7 to - | V | |
| Output Disable Time | Tplz | - to 100 | nsec | |
| Output Enable Time | Tpzl | - to 100 | nsec | |
| Aging | -5 to 5 | ppm/year | ||
| Start-up Time | - to 10 | ms | ||
| Jitter, Phase RMS(1-) | - to 1 | ps | 12KHz~20MHz Frequency Band | |
| Absolute Maximum Ratings: Vdd Terminal Voltage | Vdd | -0.5 to 7.0 | V | |
| Absolute Maximum Ratings: Input Terminal Voltage | Vcont | -0.5 to Vdd+0.5 | V | |
| Absolute Maximum Ratings: Output Terminal Voltage | Vout | -0.5 to Vdd+0.5 | V | |
| Absolute Maximum Ratings: Output Terminal Current | Iout | - to 15 | mA | |
| Absolute Maximum Ratings: Storage Temperature Range | Tstr | -55 to 125 | deg.C | |
| Dimensions (L x W) | 7.0 x 5.0 | mm | ±0.2 | |
| Pin Connections | 1: OE (Output Enable), 2: Vdd, 3: GND, 4: Output | |||
| Carrier Tape Material | PS Conductive | |||
| Top Tape Material | Polyester | |||
| Standard Packing Quantity | 1,000 | PCS / REEL | ||
| Mechanical Performance: Shock | Dropping from 50 cm height 3 times on 30mm Concrete Floor | Refer to: JIS C 60068-2-32 | ||
| Mechanical Performance: Vibration | Frequency 10-55Hz, Sine Wave full amplitude of 0.8mm to X, Y and Z 3 axes, Duration of 2 hours to each axis. | Refer to: JIS C 60068-2-6/MIL-HDBK-781A 6.5.2 | ||
| Mechanical Performance: Leakage Test | Leak Rate 1.0x10-9 Pa-m3/sec. Max. | Measured by Helium leak detector. Refer to: JIS C 60068-2-17 | ||
| Mechanical Performance: Solder ability | After applying ROSIN Flux, dipping in solder bath at 245℃ +/- 5℃ for 3+/-0.5 sec. | Refer to: JIS C 60068-2-20/C 60068-2-58 | ||
| Environmental Performance: Resistance of Soldering Heat | Performing as the following reflow | Refer to: JIS C 60068-2-58 | ||
| Environmental Performance: Humidity | 60℃+/-2℃, RH 90~95%, Duration of 240 hours. Back to the room temperature first, then check the component after 1~2 hours. | Refer to: JIS C 60068-2-3 | ||
| Environmental Performance: Storage in Low Temperature | -40℃ +/-2℃, Duration of 240 hours. Back to the room temperature first, then check the component after 1~2 hours. | Refer to: JIS C 60068-2-1 | ||
| Environmental Performance: Storage in High Temperature | +85℃ +/-2℃, Duration of 240 hours. Back to the room temperature first, then check the component after 1~2 hours. | Refer to: JIS C 60068-2-2 | ||
| Environmental Performance: Thermal Shock | -40℃ +/-2℃ (30min) ↔ +85℃ +/-2℃ (30min) 25 cycles. And Temperature Increasing/reducing time≤3mins. Back to the room temperature first, then check the component after 1~2 hours. | Refer to: JIS C 0025 |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina