Crystal Oscillator HELE SSR016384I5CH 16.384 MHz Frequency with Pb Free Environmental Standards

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

The HSO751S Crystal Oscillator from Harmony Electronics Corporation is designed for precise frequency generation. It offers a nominal frequency of 16.384000MHz and operates within a specified temperature and voltage range. This component is suitable for applications requiring stable and reliable oscillation, with features like output enable/disable functions and low current consumption in specific modes. It is manufactured with a focus on compliance with environmental standards.

Product Attributes

Brand: HARMONY ELECTRONICS CORPORATION
Product Type: Crystal Oscillator
Model: HSO751S
Country of Origin: Taiwan
Certifications: Pb free, RoHS Compliant, HF-Halogen free, REACH Compliant
MSL Level: 1

Technical Specifications

Electrical Specifications

Item	Symbol	Electrical Spec.	Unit	Condition
Output Frequency	FL	16.384000	MHz
Frequency Stability	f/F	-50 to +50	ppm	@5.00.5V/10~70
Operating Temperature Range	Topr	-10 to +70
Supply Voltage	Vdd	4.5 to 5.5	V
Output Load	CL	15	pF	C-MOS
Current Consumption 1	Idd1	- to 16	mA	@5.0V/ 253 (#1 pin: open or "H")
Current Consumption 2	Idd2	- to 0.02	mA	(#1 pin: "L" level)
Low Level Output Voltage	Vol	- to 0.1xVdd	V
High Level Output Voltage	Voh	0.9xVdd to -	V
Symmetry Duty		40 to 60	%
Rise & Fall Time	Tr & Tf	- to 10	ns
Low Level Input Current	Iil	- to -100	uA
High Level Input Current	Iih	- to 100	uA
Low Level Input Voltage	Vil	- to Vddx0.3	V
High Level Input Voltage	Vih	Vddx0.7 to -	V
Output Disable Time	Tplz	- to 150	nsec
Output Enable Time	Tpzl	- to 10	msec
Aging		-5 to 5	ppm/year
Start-up Time		- to 10	ms
Jitter, Phase RMS(1-)		- to 1	ps	12KHz~20MHz Frequency Band

Absolute Maximum Ratings

Item	Symbol	Value	Unit
Vdd Terminal Voltage	Vdd	-0.5 to 7.0	V
Input Terminal Voltage	Vcont	-0.5 to Vdd+0.5	V
Output Terminal Voltage	Vout	-0.5 to Vdd+0.5	V
Output Terminal Current	Iout	15	mA
Storage Temperature Range	Tstr	-55 to 125	deg.C

Dimensions

Dimensions: 7.00.2 x 5.00.2 mm
Height Max: 3.7 mm

Pin Connections

Pin #	Name	Description
#1	OE(Output Enable)
#2	Vdd
#3	GND
#4	Output

Mechanical Performance

Item	Test Methods	Specifications
Shock	Dropping from 50 cm height 3 times on 30mm hard wooden board. Refer to: JIS C 60068232	A
Vibration	Frequency 1055Hz, Sine Wave full amplitude of 0.8mm to X, Y and Z 3 axes, Duration of 2 hours to each axis. Refer to: JIS C 6006826	A
Leakage Test	Measured by Helium leak detector.	Leak Rate 1.0x109 Pam3/sec. Max.
Solder ability	After applying ROSIN Flux, dipping in solder bath at 245deg.C +/ 5deg.C for 3+/0.5 sec. Refer to: JIS C 60068220	B (More than 90% of lead shall be covered by new solder.)

Environmental Performance

Item	Test Methods	Specifications
Resistance of Soldering Heat	Performing as the following reflow: A	A
Humidity	Temperature 60+/2, RH 90~95%, Duration of 240 hours. Back to the room temperature first, then check the component after 1~2 hours. Refer to: JIS C 6006823	A
Storage in Low Temperature	55deg.C +/2deg.C, Duration of 240 hours. Back to the room temperature first, then check the component after 1~2 hours. Refer to: JIS C 6006821	A
Storage in High Temperature	+125deg.C +/2deg.C, Duration of 240 hours. Back to the room temperature first, then check the component after 1~2 hours. Refer to: JIS C 6006822	A
Temperature cycles	55deg.C+/2deg.C (30min) +125deg.C+/2deg.C (30min) 25 cycles. And Temperature Increasing/reducing time3mins. Back to the room temperature first, then check the component after 1~2 hours. Refer to: JIS C 0025	A