Surge resistant electronic component Hongda RXF-2WS-5.1R-J-T52 for power supplies and home appliances
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
The RXF series from Dongguan Hongda Electronic Technology Co., Ltd. offers high-performance resistors with excellent surge resistance and fusing consistency. These compact resistors are designed for easy installation and provide reliable safety, making them ideal for a wide range of electronic equipment including light sources, switching power supplies, chargers, and home appliances. They have obtained VDE, UL/CUL, and CQC safety certifications.
Product Attributes
- Brand: RXF Series
- Manufacturer: DONGGUAN HONGDA ELECTRONIC TECHNOLOGY CO.,LTD
- Origin: China
- Certifications: VDE, UL/CUL (Cert No: E359590), CQC (Cert No: 0.5W-CQC13001095211, 1W-CQC13001095213, 2W-CQC13001095221)
Technical Specifications
Dimensions and Lead Lengths
| Model | Rated Power (W) | Dimensions (mm) Dmax. Lmax. | Lead Allowable Length* (mm) | H1 | d0.05 |
|---|---|---|---|---|---|
| RXF 0.25, 0.5S, 1WX | 3.0 | 7.0 | 6070 | 0.380.45 | 1 |
| 0.5, 1S, 2WX | 4.0 | 10.0 | 6090 | 0.430.60 | 1.5 |
| 1, 2S, 3WX | 5.0 | 12.0 | 6070 | 0.540.72 | - |
| 2, 3S | 6.0 | 16.0 | 6080 | 0.600.72 | - |
Electrical Specifications
| Model | Rated Power (W) | Resistance Range () | Resistance Tolerance (%) | Insulation Voltage (V) (DC or AC peak) | Component Limit Voltage (V) |
|---|---|---|---|---|---|
| RXF 0.25, 0.5S, 1X | - | 0.22-300 | 5, 10 | 250 | 200 |
| 0.5, 1S, 2X | - | - | - | 250 | 350 |
| 1, 2S, 3X | - | - | - | 350 | 350 |
| 2, 3S | - | 0.22-47 | - | 500 | 350 |
General Data
| Parameter | Value |
|---|---|
| Nominal Resistance Tolerance | 5%, 10% |
| Climatic Category | 55/155/21 |
| Low Air Pressure | 8.5kpa |
| Stability Grade | 5% |
| Resistance Change Limit (Long-term) | (5%R+0.1) |
| Resistance Change Limit (Short-term) | (1%R+0.05) |
| Temperature Coefficient (Standard) | 350 ppm |
| Temperature Coefficient (Semi-fusing, Explosion-proof, High Surge) | 35001500 ppm |
| Rated Current | I(A) = P(W)/R() |
| Derating Curve | Refer to Figure 2 (Rated power is maximum continuous operating power at 70; derate above 70) |
| Fusing Characteristic Definition | Significant increase in resistance when subjected to specified overload, causing current to drop below 1/50 of initial test current. Fusing time is the time from overload application to fusing. |
| Fusing Time Requirement (Standard & High Surge Types) | See Table 3-1 |
| Fusing Time Requirement (Explosion-proof Types) | See Table 3-2 |
| Fusing Time Requirement (Semi-fusing Types) | See Table 3-3 |
| Surge Impact Performance | Test as per Figure 3; repeated switching for 100 cycles (2s ON, 2s OFF) should not result in an open circuit. |
Main Test Items, Methods, and Performance Requirements
| No. | Test Item | Test Method | Performance Requirement |
|---|---|---|---|
| 1 | Resistance | Measured by resistance error sorter. | Resistance value within nominal resistance and allowable deviation. |
| 2 | Short-time Overload | Apply 2.5 times rated voltage for 5s, recover 1-2h, measure resistance, calculate change rate. | Resistance Change: R(2%R+0.05) |
| 3 | Solderability | Dip lead ends in solder pot (2605) for 20.5s, depth 2+0/-0.5mm from body. Observe solder coverage. | Over 90% surface coverage in circumferential direction of the dipped part. |
| 4 | Voltage Proof | Place resistor in metal "V" groove, apply specified insulation voltage between leads and groove for 60s. | No visible damage, clear marking; no breakdown or arcing. |
| 5 | Resistance to Soldering Heat | Measure resistance before test, dip lead ends in solder pot (35010) for 3.50.5s, depth 2+0/-0.5mm from body. Recover 1h, measure resistance, calculate change rate. | Resistance Change: R(1%R+0.05) |
| 6 | Rapid Temperature Change | Cycle: Low temp (-553) (30min) -> Room temp (2-3min) -> High temp (1553) (30min) -> Room temp (2-3min). Repeat 5 cycles. Recover 1-2h, measure resistance, calculate change rate. | Resistance Change: R(1%R+0.05) |
| 7 | Endurance | Place in constant temperature oven (703), apply rated DC voltage (1.5h ON, 0.5h OFF) for 1000h. Recover 1-4h, measure resistance, calculate change rate. | Resistance Change: R(5%R+0.1) |
| 8 | Lead Strength | Tensile: 10N for 10s. Bending: Apply 5N load, tilt body ~90 (2-3s), recover, bend 90 in opposite direction (2 bends total). | Resistance Change: R(1%R+0.05) |
| 9 | Vibration | Resistor body 61mm from mounting point. Frequency 10-500Hz, amplitude 0.75mm or acceleration 98m/s (whichever is smaller). Directions Z, X, Y axes for 2h each (total 6h). Cycle 1min (10-55-10Hz). Measure resistance, calculate change rate. | 1) Appearance: No mechanical damage. 2) Resistance Change: R(1%R+0.05) |
| 10 | Climatic Sequence | Dry heat -> Cyclic damp heat (Db, 1st cycle) -> Cold -> Low pressure -> Cyclic damp heat (Db, remaining cycles) -> DC load. | Resistance Change: R(5%R+0.1). Insulation Resistance: 100M. |
| 11 | Accidental Overload | Install sample in single-layer wire mesh cylinder (253mm from body). Apply 5, 10, 16 times rated power overload for 5min or until open circuit. | Wire mesh cylinder does not ignite. |
Taping Style and Dimensions
| Taping Specification | Dimensions (mm) U | W | P | L1-L2 | T | Z | R | t | T2 |
|---|---|---|---|---|---|---|---|---|---|
| T26 | 381 | 260.5 | 50.5 | 0.5 | 60.1 | 1 | 0 | 3.2 | 1.5 |
| T52 | 642 | 521 | - | 1 | - | - | - | - | - |
| T63 | 752 | 631 | 100.5 | 1.2 | 752 | 631 | - | - | - |
| T72 | 842 | 722 | 50.5 | 1.2 | 842 | 722 | - | - | - |
Sleeve Product Style and Dimensions
| Shape | Dimensions (mm) H1 | H11.5 | H21.5 | hh (15%) | h12 | h22 |
|---|---|---|---|---|---|---|
| TA Type | 70 | 20 | 20 | 50 | 10 | 10 |
| TB Type | 80 | 5 | 25 | 40 | 10 | 30 |
Molded Style and Dimensions
| Shape | Dimensions (mm) P1.0 | H1 | h0.5 |
|---|---|---|---|
| n Type | 5 | 3.5 | 8 |
| B Type | 5 | 3.5 | 8 |
| L Type | 12.5 | 4.5 | 14.5 |
Model Specification Naming Explanation (Example)
| Component | Description |
|---|---|
| RXF | Series Name |
| Rated Power | 0.25w, 0.5w, 1w, 2w, 3w |
| Resistance Tolerance | J: 5%, K: 10%, M: 20% |
| Nominal Resistance | E24 Series (See diagram) |
| Type | S: Miniaturized, X: Ultra-miniaturized |
Color Code Marking
| Color | 1st Digit | 2nd Digit | 3rd Digit | Multiplier | Tolerance |
|---|---|---|---|---|---|
| Black | 0 | 0 | 0 | 10 | - |
| Brown | 1 | 1 | 1 | 10 | 1% |
| Red | 2 | 2 | 2 | 10 | 2% |
| Orange | 3 | 3 | 3 | 10 | - |
| Yellow | 4 | 4 | 4 | 10 | - |
| Green | 5 | 5 | 5 | 10 | 0.5% |
| Blue | 6 | 6 | 6 | 10 | 0.25% |
| Violet | 7 | 7 | 7 | 10 | 0.1% |
| Gray | 8 | 8 | 8 | 10 | - |
| White | 9 | 9 | 9 | 10 | - |
| Gold | - | - | - | 10 | 5% |
| Silver | - | - | - | 10 | 10% |
| Plain | - | - | - | - | 20% |
Packaging
- Inner Box Packaging: Taped, 1K/box
- Outer Box Packaging: Not specified
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina