surge resistant fuse Hongda RXF-1/2W-4.7R-J-T52 suitable for chargers and switching power supplies
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
The RXF Series is a range of electronic components from DONGGUAN HONGDA ELECTRONIC TECHNOLOGY CO., LTD. These components offer excellent surge resistance, good fusing consistency, and a compact size for easy installation, ensuring safety and reliability. They are widely used in electronic equipment such as light sources, switching power supplies, chargers, and home appliances.
Product Attributes
- Brand: HONGDA
- Origin: Dongguan, China
- Certifications: VDE, UL/CUL (E359590), CQC (0.5W-CQC13001095211, 1W-CQC13001095213, 2W-CQC13001095221)
Technical Specifications
Dimensions and Lead Lengths
| Model | Rated Power (W) | Dimensions (mm) Dmax. x Lmax. | Lead Allowable Length* (mm) H1 | Lead Diameter d0.05 |
|---|---|---|---|---|
| RXF 0.25, 0.5S, 1WX | 3.0 | 7.0 | 6070 | 0.380.45 |
| 0.5, 1S, 2WX | 4.0 | 10.0 | 6090 | 0.430.60 |
| 1, 2S, 3WX | 5.0 | 12.0 | 6070 | 0.540.72 |
| 2, 3S | 6.0 | 16.0 | 6080 | 0.600.72 |
Electrical Characteristics
| Model | Rated Power (W) | Resistance Range () | Resistance Tolerance (%) | Insulation Voltage (V) (DC or AC Peak) | Component Limit Voltage (V) |
|---|---|---|---|---|---|
| RXF 0.25, 0.5S, 1X | 0.22-300 | 5, 10 | 250 | 200 | |
| 0.5, 1S, 2X | 250 | 350 | |||
| 1, 2S, 3X | 350 | 350 | |||
| 2, 3S | 0.22-47 | 500 | 350 |
General Data
| Parameter | Specification |
|---|---|
| Nominal Resistance Tolerance | 5%, 10% |
| Climatic Category | 55/155/21 |
| Low Air Pressure | 8.5kpa |
| Stability Grade | 5% |
| Limit Value of Resistance Change | Long-term test: (5%R+0.1); Short-term test: (1%R+0.05) |
| Temperature Coefficient | Standard type 350 ppm; Semi-fusing type, explosion-proof type, high lightning strike resistance type: 35001500 ppm |
| Rated Current | I2(A)=P(W)/R() |
| Power Derating Curve | See Figure 2. Rated power is the maximum value for continuous operation at 70. Derating is required above 70 according to the curve. |
| Fusing Characteristics | Defined as significant increase in resistance when subjected to specified overload, causing current to drop below 1/50 of the initial test current. Fusing time is the time from applying overload to fusing. |
| Fusing Time Requirements | Under specified rated current multiples overload conditions, fusing time should comply with tables. (See Tables 3-1, 3-2, 3-3 for details). Fusing time can be customized. |
| Impact Resistance | Test involves repeatedly switching on/off for 100 cycles (2s on, 2s off) without open circuit. (See Figure 3 for circuit diagram). Capacitor C and resistor R values are based on customer requirements. |
Main Test Items, Methods, and Performance Requirements
| No. | Test Item | Test Method | Performance Requirement |
|---|---|---|---|
| 1 | Resistance | Measured by resistance error sorter. | Resistance value within nominal resistance and allowable tolerance. |
| 2 | Short-time Overload | Apply 2.5 times rated voltage for 5s, recover 1-2h, measure resistance, calculate change rate. | Resistance change: R(2%R+0.05) |
| 3 | Solderability | Dip lead in solder pot (2605) for 20.5s, depth 2+0/-0.5mm from body. Observe solder coverage. | Over 90% surface coverage in circumferential direction of dipped part. |
| 4 | Withstand Voltage | Apply specified insulation voltage between leads and metal 'V' groove for 60s. | No visible damage, clear marking; no breakdown or arcing. |
| 5 | Withstand Soldering Heat | Dip lead in solder pot (35010) for 3.50.5s, depth 2+0/-0.5mm from body. Recover 1h, measure resistance, calculate change rate. | Resistance change: R(1%R+0.05) |
| 6 | Rapid Temperature Change | Cycle: Low temp (-553) (30min), room temp (2-3min), high temp (1553) (30min), room temp (2-3min). Repeat 5 cycles. Recover 1-2h, measure resistance, calculate change rate. | Resistance change: R(1%R+0.05) |
| 7 | Endurance | Place in constant temperature oven (703). Apply rated DC voltage, 1.5h on, 0.5h off, cycle for 1000h. Recover 1-4h, measure resistance, calculate change rate. | Resistance change: R(5%R+0.1) |
| 8 | Lead Strength | Tensile: 10N for 10s; Bending: 5N load on lead, tilt body approx. 90 in (2-3)s, then bend in opposite direction (2 bends total). | Resistance change: R(1%R+0.05). |
| 9 | Vibration | Vibration rate 10-500Hz, amplitude 0.75mm or acceleration 98m/s (whichever is smaller); vibration along Z, X, Y axes for 2h each (total 6h), period 1min (10-55-10Hz). Measure resistance, calculate change rate. | 1) Appearance: No mechanical damage. 2) Resistance change: R(1%R+0.05) |
| 10 | Climatic Sequence | Dry heat; Cyclic damp heat (Db); Cold; Low pressure; Cyclic damp heat (Db); DC load. | Resistance change: R(5%R+0.1). Insulation resistance: 100M. |
| 11 | Accidental Overload | Apply 5, 10, 16 times rated power overload for 5min or until open circuit. Sample placed inside single-layer wire mesh cylinder at 253mm from body. | Wire mesh cylinder does not ignite. |
Taping Specifications
| Reel Specification | Dimensions (mm) U x W | Pitch P | L1-L2 | T | Z | R | t | S | T2 |
|---|---|---|---|---|---|---|---|---|---|
| T26 | 381 x 260.5 | 50.5 | <0.5 | 60.1 | 1 | 3.2 | <1.5 | - | - |
| T52 | 642 x 521 | - | <1 | - | - | - | - | - | - |
| T63 | 752 x 631 | 100.5 | 1.2 | - | - | - | - | - | - |
| T72 | 842 x 722 | 50.5 | <1.2 | - | - | - | - | - | - |
Sleeve Product Dimensions
| Shape | Dimensions (mm) H1 | H11.5 | H21.5 | hh (15%) | h12 | h22 |
|---|---|---|---|---|---|---|
| TA Type | 70 | 20 | 20 | 50 | 10 | 10 |
| TB Type | 80 | 5 | 25 | 40 | 10 | 30 |
Note: Exposed lead length 5 mm has a tolerance of +2/-1 mm. Sleeve dimensions can be customized.
Molded Product Dimensions
| Shape | Dimensions (mm) P1.0 | H1 | h0.5 |
|---|---|---|---|
| n Type | 5 | 3.5 | 8 |
| B Type | 5 | 3.5 | 8 |
| L Type | 12.5 | 4.5 | 14.5 |
Note: Molded shape and dimensions can be customized.
Model Specification Naming Convention
Example: RXF 1W S 10 J
| Component | Description |
|---|---|
| Rated Power | 0.25w, 0.5w, 1w, 2w, 3w |
| Resistance Tolerance | J: 5%, K: 10%, M: 20% |
| Nominal Resistance | E24 Series (See color code chart for details) |
| Model Suffix | S: Miniaturized, X: Ultra-miniaturized |
Color Code Markings
| Color | 1st Digit | 2nd Digit | 3rd Digit | Multiplier | Tolerance |
|---|---|---|---|---|---|
| Black | 0 | 0 | 0 | 10 (1) | - |
| Brown | 1 | 1 | 1 | 10 (10) | 1% |
| Red | 2 | 2 | 2 | 10 (100) | 2% |
| Orange | 3 | 3 | 3 | 10 (1k) | - |
| Yellow | 4 | 4 | 4 | 10 (10k) | - |
| Green | 5 | 5 | 5 | 10 (100k) | 0.5% |
| Blue | 6 | 6 | 6 | 10 (1M) | 0.25% |
| Violet | 7 | 7 | 7 | 10 (10M) | 0.1% |
| Gray | 8 | 8 | 8 | 10 (100M) | - |
| White | 9 | 9 | 9 | 10 (1G) | - |
| Gold | - | - | - | 10 (0.1) | 5% |
| Silver | - | - | - | 10 (0.01) | 10% |
| Plain | - | - | - | - | 20% |
Packaging
- Inner Box Packaging: Tape & Reel 1K/box
- Outer Box Packaging: Not specified
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina