electronic resistor Hongda RXF-1W-5.1R-J-T52 suitable for surge resistance and compact installation
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
The RXF series from Dongguan Hongda Electronic Technology Co., Ltd. are resistors designed for a wide range of electronic equipment. They offer good surge resistance, excellent fusing consistency, and a compact size for easy installation, ensuring safety and reliability. These resistors are widely used in electronic devices such as light sources, switching power supplies, chargers, and home appliances.
Product Attributes
- Brand: RXF Series
- Manufacturer: Dongguan Hongda Electronic Technology Co., Ltd.
- Origin: China
- Certifications: VDE (Certificate No.: 40036858), UL/CUL (Certificate No.: E359590), CQC (Certificate No.: 0.5W-CQC13001095211, 1W-CQC13001095213, 2W-CQC13001095221)
Technical Specifications
Dimensions and Lead Lengths
| Model | Rated Power (W) | Dimensions (mm) Dmax. x Lmax. | Lead Allowable Length* (mm) H1 | Diameter d0.05 |
|---|---|---|---|---|
| RXF 0.25, 0.5S, 1WX | 3.0 | 7.0 | 6070 | 0.380.45 |
| RXF 0.5, 1S, 2WX | 4.0 | 10.0 | 6090 | 0.430.60 |
| RXF 1, 2S, 3WX | 5.0 | 12.0 | 6070 | 0.540.72 |
| RXF 2, 3S | 6.0 | 16.0 | 6080 | 0.600.72 |
Electrical Specifications
| Model | Rated Power (W) | Resistance Range () | Resistance Tolerance (%) | Insulation Voltage (V) (DC or AC peak) | Component Limit Voltage (V) |
|---|---|---|---|---|---|
| RXF 0.25, 0.5S, 1X | - | 0.22-300 | 5, 10 | 250 | 200 |
| RXF 0.5, 1S, 2X | - | - | - | 250 | 250 |
| RXF 1, 2S, 3X | - | - | - | 350 | 350 |
| RXF 2, 3S | - | 0.22-47 | - | 500 | 350 |
General Data
| Parameter | Specification |
|---|---|
| Nominal Resistance Tolerance | 5%, 10% |
| Climatic Category | 55/155/21 |
| Low Air Pressure | 8.5kPa |
| Stability Grade | 5% |
| Resistance Change Limit (Long-term) | (5%R+0.1) |
| Resistance Change Limit (Short-term) | (1%R+0.05) |
| Temperature Coefficient | Standard Type: 350 ppm; Semi-fusing, Explosion-proof, High Lightning Surge Type: 35001500 ppm |
| Rated Current | I(A) = P(W) / R() |
| Power Derating | Rated power is maximum continuous operation at 70. Derate according to the curve above 70. (See Figure 2) |
| Fusing Characteristic | Defined as significant increase in resistance when subjected to specified overload, causing current to drop below 1/50 of initial test current. Fusing time is the duration from overload application to fusing. |
| Fusing Time Requirements (Standard and High Lightning Surge Types) | See Table 3-1 for overload multiples and fusing times. Fusing time can be customized. |
| Fusing Time Requirements (Explosion-proof Types) | See Table 3-2. |
| Fusing Time Requirements (Semi-fusing Types) | See Table 3-3. |
| Surge Impact Performance | Test requires repeated switching (2s on, 2s off) for 100 cycles without open circuit. (See Figure 3) |
| Capacitor C Selection | Based on customer requirements; default 10uF if not specified. |
| Resistor R Selection | Based on circuit usage, calculated as internal resistance. Resistor power rating 20W, power factor 0.8. For resistors below 10W, typically use 20W, 5.1K (5%). |
Main Test Items, Methods, and Performance Requirements
| No. | Test Item | Test Method | Performance Requirement |
|---|---|---|---|
| 1 | Resistance | Measured by resistance error sorter. | Resistance value within nominal value and allowable tolerance. |
| 2 | Short-time Overload | Apply 2.5 times rated voltage for 5s, recover for 1-2h, measure resistance, calculate change rate. | Resistance Change: R (2%R + 0.05) |
| 3 | Solderability | Dip lead ends in solder pot (2605) for 20.5s, depth 2+0/-0.5mm from body. Observe coverage. | Over 90% surface coverage in circumferential direction on dipped part. |
| 4 | Withstand Voltage | Place resistor in metal 'V' groove, apply specified insulation voltage between leads and groove for 60s. | No visible damage, clear marking; no breakdown or arcing. |
| 5 | Solder Heat Resistance | Measure resistance before test. Dip lead ends in solder pot (35010) for 3.50.5s, depth 2+0/-0.5mm from body. Recover for 1h, measure resistance, calculate change rate. | Resistance Change: R (1%R + 0.05) |
| 6 | Rapid Temperature Change | Cycle: Low temp (-553) (30min), room temp (2-3min), high temp (1553) (30min), room temp (2-3min). Repeat 5 cycles. Recover 1-2h, measure resistance, calculate change rate. | Resistance Change: R (1%R + 0.05) |
| 7 | Endurance | Place in constant temperature oven (703), apply rated DC voltage. Cycle: 1.5h on, 0.5h off for 1000h. Recover 1-4h, measure resistance, calculate change rate. | Resistance Change: R (5%R + 0.1) |
| 8 | Lead Strength | Tensile: 10N for 10s. Bending: Apply 5N load, tilt body ~90 in (2-3)s. Repeat bending in opposite direction. | Resistance Change: R (1%R + 0.05) |
| 9 | Vibration | Resistor body 61mm from mounting point. Frequency 10-500Hz, amplitude 0.75mm or acceleration 98m/s (whichever is smaller). Duration 2h each on Z, X, Y axes (total 6h). Cycle: 1min (10-55-10Hz). Measure resistance, calculate change rate. | 1) Appearance: No mechanical damage. 2) Resistance Change: R (1%R + 0.05) |
| 10 | Climatic Sequence | Dry heat, cyclic damp heat (Db), cold, low pressure, cyclic damp heat (Db), DC load. | Resistance Change: R (5%R + 0.1). Insulation Resistance: 100M. |
| 11 | Accidental Overload | Install sample in single-layer silk screen cylinder (253mm from body). Apply 5, 10, 16 times rated power overload for 5min or until open circuit. | Silk screen cylinder does not ignite. |
Taped Packaging Specifications
| Taped Specification | Dimensions (mm) U x W | Pitch P (mm) | L1-L2 | T | Z | R | t | T2 |
|---|---|---|---|---|---|---|---|---|
| T26 | 381 x 260.5 | 50.5 | 0.5 | 60.1 | 1 | 0 | 3.2 | 1.5 |
| T52 | 642 x 521 | - | 1 | - | - | - | - | - |
| T63 | 752 x 631 | 100.5 | 1.2 | - | - | - | - | - |
| T72 | 842 x 722 | 50.5 | 1.2 | - | - | - | - | - |
Sleeve Product Specifications
| Type | Dimensions (mm) H1 | H11.5 | H21.5 | hh (15%) | h12 | h22 |
|---|---|---|---|---|---|---|
| TA Type | 70 | 20 | 20 | 50 | 10 | 10 |
| TB Type | 80 | 5 | 25 | 40 | 10 | 30 |
Molded Product Specifications
| Type | Dimensions (mm) P1.0 | H1 | h0.5 |
|---|---|---|---|
| n Type | 5 | 3.5 | 8 |
| B Type | 5 | 3.5 | 8 |
| L Type | 12.5 | 4.5 | 14.5 |
| L Type | - | 5.5 | - |
Model Specification Naming Convention
| Component | Description |
|---|---|
| RXF | Series Name |
| Rated Power | 0.25w, 0.5w, 1w, 2w, 3w |
| Resistance Tolerance | J: 5%, K: 10%, M: 20% |
| Nominal Resistance | E24 Series (See color code diagram) |
| Type | S: Miniaturized, X: Ultra-miniaturized |
Color Code Markings
| Color | 1st Digit | 2nd Digit | 3rd Digit | Multiplier | Tolerance |
|---|---|---|---|---|---|
| Black | 0 | 0 | 0 | 10 (1) | - |
| Brown | 1 | 1 | 1 | 10 (10) | 1% |
| Red | 2 | 2 | 2 | 10 (100) | 2% |
| Orange | 3 | 3 | 3 | 10 (1k) | - |
| Yellow | 4 | 4 | 4 | 10 (10k) | - |
| Green | 5 | 5 | 5 | 10 (100k) | 0.5% |
| Blue | 6 | 6 | 6 | 10 (1M) | 0.25% |
| Violet | 7 | 7 | 7 | 10 (10M) | 0.1% |
| Gray | 8 | 8 | 8 | 10 (100M) | - |
| White | 9 | 9 | 9 | 10 (1G) | - |
| Gold | - | - | - | 10 (0.1) | 5% |
| Silver | - | - | - | 10 (0.01) | 10% |
| Plain | - | - | - | - | 20% |
Packaging
- Inner Box Packaging: Taped 1K/box
- Outer Box Packaging: Not specified
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina