Plug-in aluminum electrolytic capacitor HRK CD110227M1E0612VFL designed for electronic circuit performance

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

The HRK CD110 series plug-in aluminum electrolytic capacitors are designed for general-purpose applications requiring reliable performance at 105. These capacitors feature a black sleeve with white lettering for clear identification. They are suitable for various electronic circuits where stable capacitance and low leakage current are essential.

Product Attributes

Brand: HRK ()
Product Name: Plug-in Aluminum Electrolytic Capacitor
Series: CD110
Sleeve Color: Black
Marking Color: White
Origin: Shenzhen, China
Environmental Compliance: RoHS, REACH SVHC, 2006/22/EC (PFOA/PFOS), 2005/84/EC (16P), ZEK 01.2-08 (PAHs), Sony SS-00259 (18th Edition)

Technical Specifications

HRK P/N	Series	Capacitance (uF)	Rated Voltage (V)	Tolerance (%)	Max. Dissipation Factor (%)	Max. Leakage Current (uA)	Surge Voltage (V)	Impedance (, 20, 100KHz)	Rated Ripple Current (mA rms, 105, 100KHz)	Endurance (Hrs, at 105)	Diameter (mm)	Height (mm)
CD110	CD110	220	25	-20~+20	16	55	32	250	2000	6	12

Operating Temperature Range

Range: -40 to +105 (for rated voltages 6.3V to 500VDC)

Product Dimensions (for 220uF/25V)

D (mm)	L (mm)	F (mm)	d (mm)
6.0	12.0	2.5	0.50

Packaging Information (for 6x12mm)

Units per Bag	Bags per Inner Box	Units per Inner Box	Inner Boxes per Outer Box	Units per Outer Box	Inner Box Dimensions (mm)	Outer Box Dimensions (mm)
1000	16	16000	2	32000	290225295	470315320

Reference Standard

Reference standard: SJ/T11000-2023

Usage Precautions

Polarity sensitive; ensure correct connection to avoid short circuits or damage. Use non-polar capacitors if polarity is uncertain or may reverse.
Do not apply reverse voltage or DC voltage exceeding the rated voltage. Operating within the rated voltage ensures longevity.
Ripple current should be kept below the rated value to prevent overheating, capacitance reduction, and shortened lifespan. The sum of the peak ripple voltage and DC voltage must be less than the rated working voltage.
Operate within the rated temperature range. Exceeding the upper limit can significantly shorten lifespan or activate the safety vent. Lower operating temperatures extend lifespan.
Long-term storage may increase leakage current, especially at higher temperatures. Leakage current will decrease after voltage application. Pre-charge if high leakage current affects the circuit.
Not suitable for circuits with frequent charge/discharge cycles due to potential capacitance reduction or damage from heat generation.
Improper installation or stress on leads can cause internal damage, leading to high leakage current or leakage. Ensure good soldering, appropriate PCB hole spacing, and avoid bending leads or the capacitor body during soldering.
Soldering time and temperature may cause sleeve damage (cracking or shrinkage).
Do not clean with halogenated organic solvents. If cleaning is necessary, use a cleaner that guarantees capacitor quality. Do not store in cleaning solution or sealed containers after cleaning. Dry with hot air (not exceeding the upper temperature limit) for at least 10 minutes.
Avoid using halogenated organic series fixing agents and coatings. Do not seal the capacitor's sealing area with fixing agents or coatings.
Recommended storage conditions: temperature up to 35, relative humidity less than 75% RH, out of direct sunlight. Shelf life is 12 months. Check electrical characteristics and solderability if stored beyond 12 months.
Dispose of waste capacitors according to local industrial waste regulations.
Refer to EIAJ RCR-2367B for more details.