plug in aluminum electrolytic capacitor HRK CD1102261HM0511VFL for in temperature range minus 40 to plus 105
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
The CD110 series of plug-in aluminum electrolytic capacitors from HRK Electronics are designed for general-purpose applications. These capacitors feature a black sleeve with white marking and a rated operating temperature range of -40 to +105. They are suitable for various electronic circuits requiring stable capacitance and reliable performance under specified conditions.
Product Attributes
- Brand: HRK ()
- Series: CD110
- Type: Plug-in Aluminum Electrolytic Capacitor
- Sleeve Color: Black
- Marking Color: White
- Origin: China
- Environmental Compliance: RoHS, REACH SVHC, 2006/22/EC (PFOA/PFOS), 2005/84/EC (16P), ZEK 01.2-08 (PAHs), Sony SS-00259 Edition 18.
Technical Specifications
| HRK P/N | Rated Capacitance (uF) | Rated Voltage (V) | Capacitance Tolerance (%) | Dissipation Factor (max, %) | Leakage Current (uA, max) | Surge Voltage (V) | Equivalent Impedance (, 20, 100KHz) | Rated Ripple Current (mA rms, 105, 100KHz) | Durability (Hrs, at 105) | Diameter (mm) | Height (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| CD110 | 33 | 400 | -20~+20 | 24 | 436 | 450 | 190 | 2,000 | 13 | 17 |
General Specifications
| Item | Condition/Method | Standard |
|---|---|---|
| Reference Standard | SJ/T11000-2023 | |
| Operating Temperature Range | Under rated DC voltage | -40 ~ +105 |
| Testing Environment | Standard | Temp: 20-35, Humidity: 45-75% RH, Pressure: 86-106 KPa |
| Structure Components | Aluminum Foil, Separator Paper (Wood Pulp), Electrolyte (Ethylene Glycol, Ammonium Adipate), Aluminum Case, Rubber Seal (EPDM), Lead Wire (Tinned Copper Clad Steel), Sleeve (PVC) | |
| Packaging (13*17mm) | Bag/Small Box: 200 pcs, Small Box/Outer Box: 16, Outer Box Qty: 6400 pcs. Outer Box Dimensions: 470*315*320 mm. |
Reliability & Performance Tests
| Item | Test Conditions/Method | Judgment Standard |
|---|---|---|
| Capacitance (CAP) | 120Hz, Series Equivalent Circuit | Within tolerance range (see Table-1) |
| Dissipation Factor (DF) | Value in Table-1 | |
| Leakage Current (LC) | Rated voltage + 1000 resistor for 2 min | Value in Table-1 |
| Surge Voltage | 1000 cycles (30s charge, 5.5min discharge) | Capacitance change: 15% of initial, DF: spec, LC: spec, Appearance: No abnormality |
| Temperature Characteristics | -40, -25, +25, +105 | Impedance Ratio: value in table; Capacitance change: 25% of initial; DF: 5x spec; LC: spec |
| Lead Tensile Strength | Applied force for 10s | See table for force values based on lead diameter |
| Lead Bending Strength | Rotated 90 each way, 1 cycle | No visible change, no lead breakage |
| Vibration Test | 10-55Hz, 1.5mm amplitude, 2 hrs/direction | Capacitance stable, change: 5% of initial, Appearance: No defect |
| Solderability | Dipped in rosin, then 2455 solder | 90% of dipped lead surface coated with new tin |
| Endurance | Rated voltage & ripple current at max temp for rated life | Capacitance change: 20% of initial, DF: 2x spec, LC: spec, Appearance: No abnormality |
| High Temperature Storage | 1052, no voltage, 1000+48/-0 hrs | Capacitance change: 20% of initial, DF: 2x spec, LC: spec, Appearance: No abnormality |
| Anti-explosion | AC or DC voltage test | Safety vent operates without flame, or no operation within 30 min is acceptable. |
Usage Precautions
- Polarized: Ensure correct polarity. Use non-polarized capacitors if polarity is uncertain.
- Voltage: Do not exceed rated voltage or apply reverse voltage. Use within rated voltage for optimal lifespan.
- Ripple Current: Keep ripple current below rated value to prevent overheating and capacity reduction. Peak ripple voltage + DC voltage must be less than rated voltage.
- Temperature: Operate within rated temperature range. Lower ambient temperature extends lifespan.
- Storage: Long-term storage may increase leakage current, especially at higher temperatures. Pre-charge if necessary.
- Frequent Charge/Discharge: Not suitable for circuits with frequent charge/discharge cycles.
- Installation: Avoid stress on leads. Ensure good soldering, proper PCB hole spacing, and do not bend leads or body.
- Soldering: Avoid excessive soldering time/temperature to prevent sleeve damage.
- Cleaning: Do not use halogenated organic solvents. If cleaning is necessary, use appropriate solvents and dry with hot air (not exceeding max temp).
- Fixing Agents: Do not use halogenated organic series fixing agents or coatings. Avoid sealing the capacitor's sealing area.
- Storage Recommendation: Store in a cool, dry place (
- Disposal: Contact local industrial waste disposal services.
- Further Information: Refer to EIAJ RCR-2367B.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina