Standard plug in capacitor HRK CD110477M1A0607VFL rated voltage 6.3 volts capacitance 470 microfarads

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

The HRK CD110 series are standard aluminum electrolytic capacitors designed for general-purpose applications. These plug-in type capacitors feature a black sleeve with white markings, offering reliable performance at operating temperatures up to 105. They are suitable for various electronic circuits requiring stable capacitance and good ripple current handling.

Product Attributes

Brand: HRK ()
Product Type: Plug-in Type Aluminum Electrolytic Capacitor
Series: CD110
Sleeve Color: Black
Marking Color: White
Origin: China
Environmental Compliance: RoHS, REACH SVHC, PFOA/PFOS, 16P, ZEK 01.2-08 (PAHs), Sony SS-00259 (18th Edition)

Technical Specifications

HRK P/N	Series	Rated Capacitance (uF)	Rated Voltage (V)	Capacitance Tolerance (%)	Dissipation Factor (Max. %)	Leakage Current (uA, Max.)	Surge Voltage (V)	Equivalent Impedance (, 20, 100KHz)	Rated Ripple Current (mA rms) (105, 100KHz)	Durability (Hrs, at 105)	Diameter (mm)	Height (mm)
CD110477M1A0607VFL	CD110	470	6.3	-20~+20	22	47	8	210	2,000	6	7

General Specifications

Item	Specification
Operating Temperature Range	-40 to +105
Reference Standard	SJ/T11000-2023
Lead Wire Diameter (d)	0.45mm to 1.0mm (depending on size)
Lead Spacing (D)	1.6mm to 10mm (depending on size)
Case Diameter (F)	4mm to 10mm (depending on size)
Case Height (L)	5mm to 10mm (depending on size)
Packaging (for 6*7mm)	1000 pcs/bag, 25 bags/inner box, 2 inner boxes/outer box (50,000 pcs/outer box)

Product Testing Standards

Item	Test Condition/Method	Judgment Standard
Capacitance (CAP)	Series equivalent circuit, 120Hz, within rated voltage	Within tolerance specified in Table-1
Dissipation Factor (DF)		Less than or equal to the value in Table-1
Leakage Current (LC)	Rated DC voltage applied for 2 min with 1000 resistor	Less than or equal to the value in Table-1
Surge Voltage	1000 cycles at 15-35	Capacitance change within 15%, DF spec, LC spec, no visible abnormality
Temperature Characteristics	Tests at -40, -25, +25, +105	Impedance ratio, capacitance change, DF, LC within limits
Lead Tensile Strength	Applied tensile force for 101 sec	No visible appearance change, no lead breakage or looseness
Lead Bending Strength	Applied bending force	No visible appearance change, no lead breakage or looseness
Vibration Test	10-55Hz, 1.5mm amplitude, 6 hours total	Capacitance stable, change within 5%, no appearance defects
Solderability	Immersion in 2455 solder bath	Approx. 90% of immersed lead surface covered with new solder
Endurance	Rated voltage and ripple current at max temp for rated life	Capacitance change within 20%, DF 2x spec, LC spec, no abnormality
High Temperature Storage	1000+48/-0 hours at 1052 without voltage	Capacitance change within 20%, DF 2x spec, LC spec, no abnormality
Anti-explosion	AC or DC voltage/current applied	Safety vent opens, no flame; or vent does not open within 30 min

Usage Precautions

Polarity: Observe correct polarity; use non-polarized capacitors if polarity is uncertain or reversible.
Voltage: Do not apply reverse voltage or DC voltage exceeding rated voltage. Use within rated voltage for optimal lifespan. Surge voltage is the maximum temporary voltage.
Ripple Current: Keep ripple current below rated value to prevent overheating, capacitance drop, and shortened lifespan. Peak ripple voltage plus DC voltage must be less than rated voltage.
Temperature: Operate within the rated temperature range (-40 to +105). Lower ambient temperatures significantly extend lifespan.
Storage: Long-term storage can increase leakage current, especially at higher temperatures. Leakage current decreases after applying voltage. Pre-charge if high leakage current is detrimental.
Frequent Charge/Discharge: Not suitable for circuits with frequent charge/discharge cycles due to potential capacity reduction and damage from heat.
Installation: Avoid mechanical stress on leads or body during installation and soldering.
Soldering: Avoid prolonged exposure to high temperatures during soldering to prevent damage to the sleeve.
Cleaning: Do not use halogenated organic solvents. If cleaning is necessary, use compatible solvents and dry thoroughly with hot air (not exceeding max. temperature).
Fixatives/Coatings: Avoid halogenated organic compounds and do not seal the capacitor's vent.
Storage Recommendations: Store in a cool, dry place (35,
Disposal: Contact local industrial waste disposal services.
Further Information: Refer to EIAJ RCR-2367B.