Plug in Aluminum Electrolytic Capacitor HRK CD288687M1E0816VFL with Gold Lettering and Green Sleeve
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
High Frequency Low Impedance Plug-in Aluminum Electrolytic Capacitor - CD288 Series
Product Overview
The CD288 series plug-in aluminum electrolytic capacitors are designed for high-frequency and low-impedance applications. Featuring a green sleeve with gold lettering, these capacitors offer reliable performance with a wide operating temperature range of -40 to +105. They are suitable for various industrial and electronic applications where stable capacitance and low ESR are critical. The product is manufactured by Shenzhen Hongruikai Electronics Technology Co., Ltd.
Product Attributes
- Brand: HRK ()
- Series: CD288
- Sleeve Color: GREEN ()
- Marking Color: Gold ()
- Origin: Shenzhen, China
- Certifications: RoHS compliant, REACH SVHC compliance, 2006/22/EC (PFOA/PFOS) compliance, 2005/84/EC (16P) compliance, ZEK 01.2-08 (PAHs) compliance, Sony SS-00259 18th Edition environmental requirements.
Technical Specifications
| Ours P/N (Hongruikai P/N) | Rated Capacitance (uF) | Rated Voltage (V) | Capacitance Tolerance (%) | Dissipation Factor (tan, max) (%) | Leakage Current (uA, max) | Surge Voltage (V) | Equivalent Impedance (, 20, 100KHz) | Rated Ripple Current (mA rms, 105, 100KHz) | Durability (Hrs, at 105) | Diameter (mm) | Height (mm) | Lead Diameter (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| CD288 | 680 | 25 | -20~+20 | 14 | 170 | 32 | 0.050 | 1200 | 2000 | 8 | 16 | 0.45 |
Key Features & Performance
| Item | Test Conditions/Method | Judgment Standard |
|---|---|---|
| Capacitance (CAP) | Series equivalent circuit, 120Hz, rated voltage | Within rated tolerance (see table) |
| Dissipation Factor (DF) | 120Hz | max value in table |
| Leakage Current (LC) | Rated voltage applied for 2 min with 100010 series resistor | max value in table |
| Surge Voltage | 1000 cycles of charging/discharging at 15~35 | Capacitance change: 15% of initial value; DF: spec value; LC: spec value; Appearance: No visible abnormality |
| Temperature Characteristics | Tests at 255, -253, -403, +1053 | Impedance ratio (stage 2,3 vs stage 1): specified value; Capacitance change: 25% of stage 1 value; DF: 5x spec value; LC: spec value |
| Lead Tensile Strength | Applied tensile force for 101 sec | See table for values (0.45mm lead: 5N {0.51kgf}) |
| Lead Bending Strength | Applied bending force | See table for values (0.45mm lead: 2.5N {0.25kgf}) |
| Vibration Test | 10-55Hz, 1.5mm amplitude, 2 hours per direction | Capacitance stable, change: 5% of initial value; Appearance: No abnormality |
| Solderability | Immersion in 2455 solder | Approx. 90% of immersed lead surface area should be tinned |
| Endurance | Rated voltage and ripple current at rated life at upper limit temperature | Capacitance change: 20% of initial value; DF: 2x spec value; LC: spec value; Appearance: No abnormality |
| High Temperature Storage | 1000+48/-0 hours at 1052 without voltage | Capacitance change: 20% of initial value; DF: 2x spec value; LC: spec value; Appearance: No abnormality |
| Anti-explosion | AC/DC voltage applied | Safety vent opens, no flame; or no vent opening after 30 min |
Usage Precautions
- Polarity sensitive; ensure correct connection to avoid short circuits or damage. Use non-polar capacitors if polarity is uncertain.
- Do not apply reverse voltage or DC voltage exceeding the rated voltage.
- Ripple current should be kept below the rated value to prevent overheating and capacity reduction. The sum of ripple voltage peak and DC voltage should be less than the rated working voltage.
- Operate within the rated temperature range (-40 to +105) for optimal lifespan.
- Leakage current may increase after long-term storage; pre-charging may be necessary.
- Not suitable for circuits with frequent charge/discharge cycles.
- Avoid mechanical stress on leads during installation or soldering.
- Soldering temperature and time should be controlled to prevent damage to the sleeve.
- Do not use halogenated organic cleaning agents. If cleaning is necessary, use approved agents and dry with hot air (not exceeding the upper limit temperature).
- Do not use halogenated organic fixing agents or coatings, especially on the sealing area.
- Recommended storage conditions: 35,
- Dispose of according to local industrial waste regulations.
- Refer to EIAJ RCR-2367B for more details.
Environmental Statement
This product complies with RoHS Directive (no exemptions), REACH Annex XIV (SVHC), 2006/22/EC (PFOA/PFOS), 2005/84/EC (16P), ZEK 01.2-08 (PAHs), and Sony SS-00259 18th Edition environmental requirements.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina