frequency control component huaxindianzi 2T026000VY quartz crystal unit with 26 MHz nominal frequency

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

SHENZHEN HUAXIN ELECTRONICS CO.,LTD.

Product Overview: This document outlines the specifications for the HX-C series Quartz Crystal Unit, a TCXO product type. It details electrical characteristics, circuit testing, packaging, dimensions, marking, packing, reflow profiles, and reliability specifications.

Product Attributes

Brand: HX-C
Origin: Shenzhen, China

Technical Specifications

Item	Symbol	Electrical Specification (Min)	Electrical Specification (Typ)	Electrical Specification (Max)	Units	Notes
Nominal Frequency	FL		26.000		MHz
Output mode			Clipped Sine wave
Frequency Tolerance	FT	-1.5		1.5	ppm
Temperature frequency stability	TC	-1.5		1.5	ppm	-30to 85
Operating Temperature		-40		85
Storage Temperature Range	T_stg	-40		125
Aging rate	F_age		1		ppm	First year
Supply Voltage	Vdd	1.8		3.35%	V
Current	Icc		2.0		mA
Start-up time	To's'c			3	ms	More then 90%of final amplitude
Output Level		0.8		-	Vp-p	Clipped sine wave(DC-coupled)
Duty ratio	TH/T	40		60	%
Load Variation				0.2	ppm	Load_R//C=(10k //10pF)10%
Phase noise (1Hz offset)		-50			dBc/Hz
Phase noise (10Hz offset)		-80			dBc/Hz
Phase noise (100Hz offset)		-106			dBc/Hz
Phase noise (1KHz offset)		-134			dBc/Hz
Phase noise (10KHz offset)		-144			dBc/Hz
Phase noise (100KHz offset)		-152			dBc/Hz

Reliability Specification

Item	Conditions	Criteria
FREE FALL	Free dropping from 150 cm height, 3 times on a hard board.	Electrical performance meet specification requirements.
VIBRATION	Frequency: 10~2000 Hz; Amplitude: 1.52mm; 3 directions (X, Y, Z) each for 2 hours.
TEMPERATURE CYCLE	Crystal unit subjected to 10 successive temperature cycles (high and low).
IMOACT	Half sine wave shock (1000G): duration 0.5ms, 3 times each on X, Y, Z axes.
SOLDERABILITY	Temperature: 2455, immersion time: 30.5 seconds.
HIGH TEMP. & HUMIDITY	Temperature: 85 3, Humidity: 85 %, duration: 500 hours.
HIGH TEMPERATURE STORAGE	Temperature: 1252, duration: 50012 hours.	If customer's temperature requirement is higher than standard, test must be done per customer requirements.
LOW TEMPERATURE STORAGE	Temperature: -402, duration: 50012 hours.	If customer's temperature requirement is lower than standard, test must be done per customer requirements.