Long life solid electrolyte capacitor HYNCDZ E2331M025C120HY with 25 volt rating and RoHS compliance
Product Overview
The Hyncdz E2 Series is a solid electrolyte aluminum electrolytic capacitor (E-CAP) designed for demanding applications. It features low ESR, high ripple current capability, and a load life of 2000 hours at 105. This RoHS compliant capacitor is suitable for a wide range of operating temperatures and voltages, offering reliable performance and durability.
Product Attributes
- Brand: Hyncdz
- Series: E2 Series
- Type: (Pin Type)
- Certifications: RoHS Compliant
Technical Specifications
| Series | Capacitance (F) | Capacitance Tolerance (%) | Rated Voltage (VDC) | Surge Voltage (VDC) | Dissipation Factor tan (Max.) (at 120Hz, 20) | Leakage Current (A) (Max.) (at 2min, 20) | ESR (m) (at 100KHz, 20) | Ripple Current (mArms) (at 100KHz) | Load Life (Hrs) | Diameter (mm) | Length (mm) | Pitch (mm) | Wire Diameter (mm) | Color |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| E2 | 330 | 20 (M) | 25 | 28.8 | 0.12 | 1650 (0.2CV or 500A) | 35 | 3100 | 2000 | 6.3 | 12 | 2.5 | 0.6 | Red |
Key Characteristics
| Item | Characteristic Parameter |
|---|---|
| Category Temperature Range | -55 ~ +105 |
| Rated Voltage Range | 2.5 ~ 25V |
| Low Temperature Characteristics (100KHz) | Z(-25)/Z(+20) 1.25 |
| Low Temperature Characteristics (Max.Impedance Ratio) | Z(-55)/Z(+20) 1.25 |
| Endurance (at 105, 2000 Hrs) | Capacitance change 20%, D.F. 150%, ESR 150%, Leakage current Specified value |
| Damp Heat (Steady State) (at 60, 90%~95% RH, 1000 Hrs) | Capacitance change 20%, D.F. 150%, ESR 150%, Leakage current Specified value |
| Surge Voltage | Rated voltage 1.15(V) |
| Surge Voltage Test (105, 1000 cycles) | Capacitance change 20%, D.F. 150%, ESR 150%, Leakage current Specified value |
Ripple Current Correction Coefficient
| Frequency (Hz) | Coefficient |
|---|---|
| 120Hz F | 0.05 |
| 1KHz F | 0.30 |
| 10KHz F | 0.70 |
| 100KHz F | 1.00 |
Explanation of Part Numbers
The part number is structured as follows: Series (E2), Capacitance (e.g., 471 for 470F), Voltage (e.g., 025 for 25V), Diameter (e.g., 6 for 6.3mm), Color (e.g., H for Red), Length (e.g., 120 for 12.0mm), Tolerance (e.g., M for 20%), Lead Forming Type (e.g., Y for Bagged).
Operating Precautions
- Polarity: Do not reverse polarity to avoid shortened lifespan due to increased leakage current or short circuits.
- Prohibited Circuits: Avoid use in high impedance, coupling, time constant, series connection for higher withstand voltage, or circuits sensitive to leakage current.
- Overvoltage: Do not exceed the rated voltage, even momentarily, to prevent short circuits.
- Sudden Charge/Discharge: Avoid sudden charge and discharge. Use protection circuits if rush current exceeds 10A or 10x allowable ripple current. A 1k resistor is recommended for leakage current measurement.
- Operating Temperature and Ripple Current: Exceeding the upper temperature limit or allowable ripple current can shorten lifespan or cause failure.
- Leakage Current: Leakage current may slightly increase after soldering but can self-repair with DC voltage application.
- Applied Voltage: For reliability, apply less than 80% of the rated voltage. Peak DC and AC voltage should not exceed the rated voltage.
Marking
Each unit is marked with Series and trademark, Capacitance, Rated voltage, and Negative polarity.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.